Stereoselective nitrenium ion cyclizations: asymmetric synthesis of the (+)-Kishi lactam and an intermediate for the preparation of fasicularin

The asymmetric synthesis of the (+)-Kishi lactam and an intermediate for the preparation of the marine natural product fasicularin is reported. The keystone of this divergent synthesis is the diastereoselective azaspirocyclization of an N-methoxy γ-arylbutanoamide, which is believed to proceed through the intermediacy of an N-acylnitrenium ion.     

Synthesis of 2,2＇-（Substituted Arylmethylene）bis（1,6,6-trimethyl 6,7,8,9-tetrahydrophenanthro[1,2-b]furan-10,11-dione） Derivatives

The reactions of tanshinone IIA with aromatic aldehydes have been investigated and several 2, T-（substituted arylmethylene） bis （1,6,6-trimethyl-6,7,8,9-tetrahydrophenanthro[1,2-b]- furan- 10, 11-dione） derivatives were obtained,     

应用反向传播神经网络预测化合物脑血分配系数

选用27种三维结构性质描述符对脑血分配系数预测建立神经网络模型.网络模型选用典型的适合函数逼近的两层结构神经网络对脑血分配系数(lgBB,BB为脑血浓度比)进行预测,计算中采用的模型具有一个双曲正切型激活函数的隐含层和一个线性激活函数的输出层.计算表明,使用小心选择的反向传播神经网络模型对化合物脑血分配系数具有较好的预测能力.     

Development of chromium-free iron-based catalysts for high-temperature water-gas shift reaction

Chromium-free iron-based catalysts were prepared and studied in regard to their performance in the high-temperature water-gas shift reaction (HTS). The effects of various catalyst preparation variables (i.e., Fe/promoter ratio, pH of precipitation medium, calcination and reduction temperatures) and preparation methods were investigated. Aluminum is a potential chromium replacement in HTS catalysts. Further improvement in WGS activity of Fe–Al catalysts can be achieved by the addition of small amounts of copper or cobalt. Catalysts were characterized using BET surface area measurements, temperature-programmed reduction (TPR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). As a textural promoter, aluminum and chromium prevent the sintering of iron oxides and stabilize magnetite phase by retarding its further reduction to FeO and metallic Fe. The promotional effect of Cu is found to be strongly dependent on the preparation method.     

Elastic scattering cross sections for 160<Superscript>°</Superscript> and 170<Superscript>°</Superscript>backscattering of 1.40-2.64 MeV protons from natural vanadium

Summary The elastic scattering cross sections of natural vanadium for protons have been measured for beam energies below 2.64 MeV in steps of 10 keV and in the angular 160° and 170°. The overall standard error (Δσ_Exp/σ_Exp) in the measured cross sections is estimated to be better than ±3% at all the beam energies and angles. The results are presented in graphical and tabular forms that should be useful for those who wish to use the cross sections for material analysis.     

EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3 &#61620; 106, 1 &#61620; 106 and 0.5 &#61620; 106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.     

强酸阳离子交换树脂催化性能的研究

通过叔丁醇脱水生成异丁烯的反应研究对比了国内外常见种类的凝胶型和大孔型强酸阳离子交换树脂的催化性能，并对树脂的性质，预处理方法，以及其用量和再生程度等因素对树脂催化活性的影响进行了研究。在此基础上，合成了具有较高催化活性的新型大孔强酸阳离子交换树脂。     

聚氯乙烯—丁腈橡胶—氯丁橡胶三元共混物的研究

测定了聚氯乙烯（ＰＶＣ）－丁脯橡胶（ＮＢＲ－２９）－氯丁橡胶（ＣＲ）三元共混物的冲击性能和应力－应变行为，用动态力分析、扫描电和透射电镜研究了共混物的相容性和形态结构。结果表明，ＮＢＲ－２９对ＰＶＣ，ＣＲ有良好的增容作用，三元共混物是部分相容的二相体系，具有良好的抗冲击性能。     

固定HCG抗体膜的跨膜电位

高分子膜作为一项新兴技术,在很多领域得到日益广泛的应用.近十几年,随着生物工程和生物传感器的迅速发展,高分子生物功能膜的研究倍受重视.高分子生物功能膜是采用固定化技术,将具有分子识别功能的材料(如酶、抗原、抗体等)固定在高分子膜上而制得的.在固定化膜表面发生的生物化学反应,可以引起膜的荷电状态的变化,从而导致跨膜电位的变化。有关固定化膜的报导较多,但主要限于固定化的方法及其应用方面的研究,而有关高分     

Ge—132与稀土离子的配合物及其对单核苷酸磷酯键的催化水解作用

Ｇｅ－１３２的羧酸阴离子与稀土离子螯合配位，生成３：１型配合物，在配合物中，Ｇｅ－１３２的ＧｅＯ３／２基团水解为Ｇｅ（ＯＨ）３，并且不参与稀土配位，系列稀土离子配合物的结构性质基本相同，在５０℃，ｐＨ值为６的水溶液中，该配合物选择性地催化５’－ＡＭＰ或５‘－ｄＡＭＰ的磷酯键水解断裂、生成相应的核苷和磷酸，而不影响碱基与戌糖之间的苷键。