一种消除锯齿的图像放大算法

为了最大程度消除图像放大后出现的锯齿现象,提出了一种新的二次导数连续的多结点立方卷积插值函数,通过增加结点使得插值曲线更加的平滑;同时对插值函数引入逆梯度约束条件,然后根据图像放大的倍数定义一个适当的模板对图像进行卷积操作,自适应的消除图像放大后出现的锯齿现象。实验结果表明,该算法在对图像执行高倍放大时,几乎看不到锯齿,同时图像的清晰度也保持的较好。     

Ultrastructure of the compound eyes in the hangingfly Bittacus planus Cheng (Mecoptera: Bittacidae)

The ultrastructure of the apposition eyes in the hangingfly Bittacus planus Cheng was investigated using transmission electron microscopy. The compound eyes are composed of approximately 1000 contiguous ommatidia, each of which consists of a biconvex cornea, a crystalline cone, eight retinula cells, two primary pigment cells, and 12 secondary pigment cells. The rhabdom is of fused-type and formed by the rhabdomeres from eight retinula cells that run from the cone to the basal lamina, although the rhabdomere from the basal retinula cell (R8) only contributed to the lowest part of the rhabdom. The pigment granules are spread evenly in the primary pigment cells but are concentrated at the proximal and distal ends in the secondary pigment cells, and close to the rhabdom in retinula cells. The rhabdom is peculiar for the presence of gaps at the outer corner of each two adjoining rhabdomeres in different levels of retinula cell except for the proximal zone.     

Microstructure of Ba0.615Sr0.35Mg0.035TiO3 dielectric ceramics via X-ray spectrum analysis

The compound Ba0.615Sr0.35Mg0.035TiO3 was analyzed by the X-ray dispersed spectroscopy analyzer (SEM-EDAX) with the spec-trum image method, a powerful tool for chemical phase identification. The method was first time applied on a ceramic material to collect spectrum image and was progressed to identify the Mg-enriched component with fine scale pocket shown in matrix. This result, together with the stoichiometry result obtained from spot mode spectrum analysis, strongly confirmed the microstructure and properties of dielectric materials.     

六盘山药用苔藓植物资源

首次报道了宁夏六盘山药用植物16种,隶属于13科15属,其中苔类2种,藓类14种,并阐述了它们的生境、地理分布及主要药用功效.     

分布式光纤传感系统硬件的研制 ——诊断小电流接地系统K（1）故障

根据分布式光纤传感系统诊断小电流接地系统单相接地故障的原理，研究和开发了基于8031单片机的硬件系统，实现DAS平台下诊断K（1）的功能.     

The detection of HBV DNA with gold-coated iron oxide nanoparticle gene probes

Gold-coated iron oxide nanoparticle Hepatitis B virus (HBV) DNA probes were prepared, and their application for HBV DNA measurement was studied. Gold-coated iron oxide nanoparticles were prepared by the citrate reduction of tetra-chloroauric acid in the presence of iron oxide nanoparticles which were added as seeds. With a fluorescence-based method, the maximal surface coverage of hexaethiol 30-mer oligonucleotides and the maximal percentage of hybridization strands on gold-coated iron oxide nanoparticles were (120 ± 8) oligonucleotides per nanoparticle, and (14 ± 2%), respectively, which were comparable with those of (132 ± 10) and (22 ± 3%) in Au nanoparticle groups. Large network aggregates were formed when gold-coated iron oxide nanoparticle HBV DNA gene probe was applied to detect HBV DNA molecules as evidenced by transmission electron microscopy and the high specificity was verified by blot hybridization. Our results further suggested that detecting DNA with iron oxide nanoparticles and magnetic separator was feasible and might be an alternative effective method.     

Pd-Si binary bulk metallic glass

Pd_80+x Si_20−x (x = 0, 1, and 2) binary metallic glasses with the diameter ranging from 7 to 8 mm were prepared by a combination of fluxing and water quenching or air cooling. Thermal analysis results show that with increasing Si content, the glass transition temperature T _g, the initial crystallization temperature T _x and the onset crystallization temperature T _p of Pd-Si binary glassy alloys increase. Moreover, the supercooled liquid region reaches 61 K. It indicates that Pd-Si binary alloys possess large glass forming ability, which can be greatly improved by fluxing treatment. Supported by the National Basic Research Program of China (Grant No. 2007CB613905) and the National Natural Science Foundation of China (Grant Nos. 50671050 and 50431030)     

Stochastic resonance in an asymmetric bistable system driven by coloured correlated multiplicative and additive noise

This paper investigates the stochastic resonance （SR） phenomenon in an asymmetric system with coupling between multiplicative and additive noise when the coupling between two noise terms is coloured. The approximate expression of signal-to-noise ratio has been obtained by applying the two-state theory and SR exhibits in the bistable system. Moreover, the potential asymmetry r and cross-correlation strength λ can weaken the SR phenomenon, while the cross-correlation time r can strengthen the SR phenomenon.     

Surface relief resonant Brewster filters with multiple channels

In this paper, a new type of resonant Brewster filters （RBF） with surface relief structure for the multiple channels is first presented by using the rigorous coupled-wave analysis and the S-matrix method. By tuning the depth of homogeneous layer which is under the surface relief structure, the multiple channels phenomenon is obtained. Long range, extremely low sidebands and multiple channels are found when the RBF with surface relief structure is illuminated with Transverse Magnetic incident polarization light near the Brewster angle calculated with the effective media theory of sub wavelength grating. Moreover, the wavelengths of RBF with surface relief structure can be easily shifted by changing the depth of homogeneous layer while its optical properties such as low sideband reflection and narrow band are not spoiled when the depth is changed. Furthermore, the variation of the grating thickness does not effectively change the resonant wavelength of RBF, but have a remarkable effect on its line width, which is very useful for designing such filters with different line widths at desired wavelength.     

Performance of gain-switched all-solid-state quasi-continuous-wave tunable Ti:sapphire laser system

We have made a gain-switched all-solid-state quasi-continuous-wave （QCW） tunable Ti：sapphire laser system, which is pumped by a 532 nm intracavity frequency-doubled Nd：YAG laser. Based on the theory of gain-switching and the study on the influencing factors of the output pulse width, an effective method for obtaining high power and narrow pulse width output is proposed. Through deliberately designing the pump source and the resonator of the Ti：sapphire laser, when the repetition rate is 6 kHz and the length of the cavity is 220 mm, at an incident pump power of 22 W, the tunable Ti：sapphire laser from 700 to 950nm can be achieved. It has a maximum average output power of 5.6W at 800nm and the pulse width of 13.2 ns, giving an optical conversion efficiency of 25.5% from the 532 mn pump laser to the Ti：sapphire laser.