Defect-induced anisotropic surface reactivity and ion transfer processes of anatase nanoparticles

Surface reactivity and ion transfer processes of anatase TiO₂ nanocrystals were studied using lithium bis(trifluoromethylsulfone)imide (LiTFSI) as a probing molecule. Analysis of synthesized anatase TiO₂ by electron microscopy reveals aggregated nanoparticles (average size ~8 nm) with significant defects (holes and cracks). With the introduction of LiTFSI salt, the Li⁺-adsorption propensity towards the surface along the anatase (100) step edge plane is evident in both x-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) analysis. Ab initio molecular dynamics (AIMD) analysis corroborates the site-preferential interaction of Li⁺ cations with oxygen vacancies and the thermodynamically favorable transport through the (100) step edge plane. Using ⁷Li nuclear magnetic resonance (NMR) chemical shift and relaxometry measurements, the presence of Li⁺ cations near the interface between TiO₂ and the bulk LiTFSI phase was identified, and subsequent diffusion properties were analyzed. The lower activation energy derived from NMR analysis reveals enhanced mobility of Li⁺ cations along the surface, in good agreement with AIMD calculations. On the other hand, the TFSI^– anion interaction with defect sites leads to CF₃ bond dissociation and subsequent generation of carbonyl fluoride-type species. The multimodal spectroscopic analysis including NMR, electron paramagnetic resonance (EPR), and x-ray photoelectron spectroscopy (XPS) confirms the decomposition of TFSI^– anions near the anatase surface. The reaction mechanism and electronic structure of interfacial constituents were simulated using AIMD calculations. Overall, this work demonstrates the role of defects at the anatase nanoparticle surface on charge transfer and interfacial reaction processes.     

Alloyed Crystalline CdSe1-xSx Semiconductive Nanomaterials – A Solid State 113Cd NMR Study

Solid-state NMR analysis on wurtzite alloyed CdSe_1−xS_x crystalline nanoparticles and nanobelts provides evidence that the ¹¹³Cd NMR chemical shift is not affected by the varying sizes of nanoparticles, but is sensitive to the S/Se anion molar ratios. A linear correlation is observed between ¹¹³Cd NMR chemical shifts and the sulfur component for the alloyed CdSe_1−xS_x (0<x<1) system both in nanoparticles and nanobelts (δ_Cd=169.71⋅X_S+529.21). Based on this correlation, a rapid and applied approach has been developed to determine the composition of the alloyed nanoscalar materials utilizing ¹¹³Cd NMR spectroscopy. The observed results from this system confirm that one can use ¹¹³Cd NMR spectroscopy not only to determine the composition but also the phase separation of nanomaterial semiconductors without destruction of the sample structures. In addition, some observed correlations are discussed in detail.     

A Photowelding Strategy for Conductivity Restoration in Flexible Circuits

Light‐driven micropumps, which are based on electro‐osmosis with the electric field generated by photocatalytic reactions, are among most attractive research topics in chemical micromotors. Until now, research in this field has mainly been focused on the directional motion or collective behavior of microparticles, which lack practical applications. In this study, we have developed a photowelding strategy for repeated photoinduced conductivity recovery of cracked flexible circuits. We immersed the circuit in a suspension of conductive healing particles and applied photoillumination to the crack; photocatalysis of a predeposited pentacene (PEN) layer triggered electro‐osmotic effects to gather conductive particles at the crack, thus leading to conductivity recovery of the circuit. This photowelding strategy is a novel application of light‐driven micropumps and photocatalysis for conductivity restoration.     

Direct Imaging of Atomically Dispersed Molybdenum that Enables Location of Aluminum in the Framework of Zeolite ZSM‐5

Integrated differential phase‐contrast scanning transmission electron microscopy (iDPC‐STEM) is capable of directly probing guest molecules in zeolites, owing to its sufficient and interpretable image contrast for both heavy and light elements under low‐dose conditions. This unique ability is demonstrated by imaging volatile organic compounds adsorbed in zeolite Silicalite‐1; iDPC‐STEM was then used to investigate molybdenum supported on various zeolites including Silicalite‐1, ZSM‐5, and mordenite. Isolated single‐Mo clusters were observed in the micropores of ZSM‐5, demonstrating the crucial role of framework Al in driving Mo atomically dispersed into the micropores. Importantly, the specific one‐to‐one Mo‐Al interaction makes it possible to locate Al atoms, that is, catalytic active sites, in the ZSM‐5 framework from the images, according to the positions of Mo atoms in the micropores.     

Designing Sub‐2 nm Organosilica Nanohybrids for Far‐Field Super‐Resolution Imaging

Stimulated emission depletion (STED) microscopy enables ultrastructural imaging of biological samples with high spatiotemporal resolution. STED nanoprobes based on fluorescent organosilica nanohybrids featuring sub‐2 nm size and near‐unity quantum yield are presented. The spin–orbit coupling (SOC) of heavy‐atom‐rich organic fluorophores is mitigated through a silane‐molecule‐mediated condensation/dehalogenation process, resulting in bright fluorescent organosilica nanohybrids with multiple emitters in one hybrid nanodot. When harnessed as STED nanoprobes, these fluorescent nanohybrids show intense photoluminescence, high biocompatibility, and long‐term photostability. Taking advantage of the low‐power excitation (0.5 μW), prolonged singlet‐state lifetime, and negligible depletion‐induced re‐excitation, these STED nanohybrids present high depletion efficiency (>96 %), extremely low saturation intensity (0.54 mW, ca. 0.188 MW cm^?2), and ultra‐high lateral resolution (ca. λ_em/28).     

Strategy for the Construction of Diverse Poly‐NHC‐Derived Assemblies and Their Photoinduced Transformations

A series of supramolecular assemblies of types [Ag₈( L )₄](PF₆)₈ and [Ag₄( L )₂](PF₆)₄, obtained from the tetraphenylethylene (TPE) bridged tetrakis(1,2,4‐triazolium) salts H₄‐L(PF₆)₄ and Ag^I ions, is described. The assembly type obtained dependends on the N‐wingtip substituents of H₄‐L(PF₆)₄. Changes in the lengths of the N4‐wingtip substituents enables controlled formation of assemblies with either [Ag₄( L )₂](PF₆)₄ or [Ag₈( L )₄](PF₆)₈ stoichiometry. The molecular structures of selected [Ag₈( L )₄](PF₆)₈ and [Ag₄( L )₂](PF₆)₄ assemblies were determined by X‐ray diffraction analyses. While H₄‐ L (PF₆)₄ does not exhibit fluorescence in solution, their tetra‐NHC (NHC=N‐heterocyclic carbene) assemblies do upon NHC–metal coordination. Upon irradiation, all assemblies undergo a light‐induced, supramolecule‐to‐supramolecule structural transformation by an oxidative photocyclization involving phenyl groups of the TPE core, resulting in a significant change of the luminescence properties.     

Engineering the Atomic Interface with Single Platinum Atoms for Enhanced Photocatalytic Hydrogen Production

It is highly desirable but challenging to optimize the structure of photocatalysts at the atomic scale to facilitate the separation of electron–hole pairs for enhanced performance. Now, a highly efficient photocatalyst is formed by assembling single Pt atoms on a defective TiO₂ support (Pt₁/def‐TiO₂). Apart from being proton reduction sites, single Pt atoms promote the neighboring TiO₂ units to generate surface oxygen vacancies and form a Pt‐O‐Ti³⁺ atomic interface. Experimental results and density functional theory calculations demonstrate that the Pt‐O‐Ti³⁺ atomic interface effectively facilitates photogenerated electrons to transfer from Ti³⁺ defective sites to single Pt atoms, thereby enhancing the separation of electron–hole pairs. This unique structure makes Pt₁/def‐TiO₂ exhibit a record‐level photocatalytic hydrogen production performance with an unexpectedly high turnover frequency of 51423 h^?1, exceeding the Pt nanoparticle supported TiO₂ catalyst by a factor of 591.     

Asymmetric Hydrogenation of Unfunctionalized Tetrasubstituted Acyclic Olefins

Asymmetric hydrogenation has evolved as one of the most powerful tools to construct stereocenters. However, the asymmetric hydrogenation of unfunctionalized tetrasubstituted acyclic olefins remains the pinnacle of asymmetric synthesis and an unsolved challenge. We report herein the discovery of an iridium catalyst for the first, generally applicable, highly enantio‐ and diastereoselective hydrogenation of such olefins and the mechanistic insights of the reaction. The power of this chemistry is demonstrated by the successful hydrogenation of a wide variety of electronically and sterically diverse olefins in excellent yield and high enantio‐ and diastereoselectivity.     

Phosphonate‐Modified UiO‐66 Brønsted Acid Catalyst and Its Use in Dehydra‐Decyclization of 2‐Methyltetrahydrofuran to Pentadienes

Phosphorus‐modified all‐silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well‐defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO‐66 topology, achieved by attaching phosphonic acid to the 1,4‐benzenedicarboxylate ligand and using it to form UiO‐66‐PO₃H₂ by post‐synthesis modification. Characterization reveals that UiO‐66‐PO₃H₂ retains stability similar to UiO‐66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra‐decyclization of 2‐methyltetrahydrofuran (2‐MTHF). For the later reaction, the reported catalyst exhibits site‐time yields and selectivity approaching that of phosphoric acid on all‐silica zeolites. Using solid‐state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.     

Structure Determination of Alkynyl‐Protected Gold Nanocluster Au22(tBuC≡C)18 and Its Thermochromic Luminescence

An alkynyl‐protected gold nanocluster, Au₂₂(^tBuC≡C)₁₈ ( 1 ), has been synthesized and its structure has been determined by single‐crystal X‐ray diffraction. The molecular structure consists of a Au₁₃ cuboctahedron kernel and three [Au₃(^tBuC≡C)₄] trimeric staples. The cluster 1 has strong luminescence in the solid state with a 15 % quantum yield, and it displays interesting thermochromic luminescence as revealed by temperature‐dependent emission spectra. The enhanced room‐temperature emission is characterized as thermally activated delayed fluorescence.