含不同共轭桥的TCNQ开闭壳层体系NLO性质的DFT研究

采用密度泛函理论(DFT)结合有限场(FF)方法,对不同共轭桥连接的四氰代二甲基苯醌(TCNQ)开壳层和闭壳层电子态的非线性光学(NLO)系数进行计算,并以乙烯桥为例讨论共轭链长度与NLO性质的关系.结果表明:开壳层体系的极化率和二阶超极化率值都大于闭壳层体系,且共轭桥的共轭性越强,体系的极化率和二阶超极化率越大;在自由基体系中,单重态的二阶超极化率随双自由基成分y和自旋多重度的增加而增大.体系的共轭链增长,BLA(BondLength Alternation,共轭分子中相邻单、双键键长差的平均值)逐渐减小,双自由基成分y逐渐增大,体系的二阶超极化率也逐渐增大.     

Morphology controllable synthesis and luminescence properties of NaLa(WO4)2:Eu microcrystals

NaLa(WO₄)₂:Eu microcrystals with shapes of four-arris shuttle, quadrangled star, and quadrangled dendrite were hydrothermally synthesized at 180 °C for 16 h. The concentration of the reactants and cetyltrimethyl ammonium bromide (CTAB) influenced the morphologies of the products. As La(NO₃)₃, Na₂WO₄ and CTAB was 0.375, 1.0, and 1.0 mmol, respectively, four-arris shuttle was obtained. As the concentration of the reactants doubled and the amount of CTAB ranged from 0.4 to 2.0 mmol, quadrangled dendrite, quadrangled star and four-arris shuttle were prepared, respectively. Luminescence intensity measurement of the three morphologies of NaLa(WO₄)₂:Eu showed that quadrangled dendrite was the strongest and four-arris shuttle was the lowest.     

Diastereoselective silver-catalyzed 1,3-dipolar cycloaddition of azomethine ylides with fluorinated imine

We described hereby an instance of diastereoselective silver-catalyzed 1,3-dipolar cycloaddition of azomethine ylides with imine compounds. This new method provided synthetically useful, highly substituted tetrahydroimidazole derivatives with efficiency and high diastereoselectivity. We can conveniently obtain fluorinated dihydroimidazole, imidazole, and diamino esters through simple modification.     

助剂对镍基催化剂催化裂解生物质气化焦油性能的影响

 采用等体积浸渍法制备了不同助剂 (Fe, Mg, Mn 和 Ce) 修饰的镍-凹凸棒石粘土基催化剂 (Ni/PG), 并用于催化裂解生物质气化焦油反应. 采用 X 射线衍射和透射电子显微镜对 Ni/PG 催化剂进行了表征, 并用总碳分析仪测定了催化剂上的积炭. 结果表明, 助剂的种类及其含量对催化剂性能的影响显著, 在所选用的助剂中, Fe 助剂入最有利于提高 Ni/PG 催化剂上焦油的去除率和 H2 的收率, 且随助剂 Fe 含量的增加, 催化剂活性逐渐提高.     

核壳结构Ziegler-Natta复合催化剂的制备及其乙烯聚合

采用溶胶-凝胶法,将聚(苯乙烯-co-丙烯酸)(PSA)膜材料和氯化镁的复合物包覆在以硅胶为载体的TiCl3催化剂上,负载TiCl4后制得Ziegler-Natta复合催化剂.采用红外光谱、激光粒度仪和扫描电镜对催化剂进行了表征,结果表明该复合催化剂呈核壳结构.同时,考察了复合催化剂中膜的厚度和反应中的氢气含量对催化剂的聚合活性和聚乙烯性能的影响,实验发现,膜厚约为3μm的核壳结构复合催化剂活性良好,其具有带诱导期的平稳型动力学曲线;膜厚1.5μm的复合催化剂的活性接近于实验所用的以硅胶为载体的TiCl3催化剂,且其具有相似的衰减型动力学曲线.研究同时表明,不同的膜厚能够调节复合催化剂的氢调性能及所得聚乙烯的分子量分布.     

Sonochemical replication of chloroplast with titania for light harvesting

Hierarchy structure of granum in chloroplast was replicated onto titania using a simple and tactical sonochemical method and calcination. The structures of TiO(2) replicas were characterized by XRD, FE-SEM and TEM and the pore structures were characterized by N(2) adsorption/desorption. As a comparison, the preparation without sonication by using impregnation then calcination method was conducted, which shows the efficiency of the ultrasound on the exact replication of granum from micrometers down to nanometers. The optical properties of the TiO(2) replica, the chloroplast and the commercial pure TiO(2) powder together with the compared replica were measured by absorbance spectroscopy. It was found that the absorbance intensity of the TiO(2) replica made by ultrasonication is much better than the soaked one, and is twice of that of the pure TiO(2) powder in ultraviolet - visible light range. The excellent light harvesting performance of the TiO(2) is attributed to the combination of the functionality from the inorganic oxide and the fine hierarchical biological structures.     

A novel fluorescent molecule based on 1,8-naphthalimide: synthesis,spectral properties,and application in cell imaging

A novel naphthalimide molecule, 4-(2-methoxyethoxy)-N-butyl-1,8-naphthalimide (MEBN), has been synthesized and characterized. The UV–visible absorption and fluorescence emission spectral properties in n-hexane, toluene, CHCl₃, and CH₃OH were studied. Its optical properties depend on solvent polarity. The application of MEBN in cell imaging was investigated.     

反应型阻燃剂合成及在不饱和树脂中的应用

以对苯二酚为原料合成了四溴对苯二酚二羟乙基醚(TBHQD)，并对反应条件进行了探索。利用核磁共振(NMR)，质谱(MS)确证了其结构。以其为单体合成了6种不饱和树脂，并且对这些树脂进行了热机械性能的测定，氧指数测定及热分析。     

Novel soluble fluorinated poly(ether imide)s with different pendant groups: Synthesis,thermal, dielectric,and optical properties

Three types of new bis(ether dianhydride) monomers, [4,4′‐(2‐(3′‐methylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4a)], [4,4′‐(2‐(3′‐trifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4b)], and [4,4′‐(2‐(3′,5′‐ditrifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4c)] were prepared via a multistep reaction sequence. Three series of soluble poly(ether imide)s (PEIs) were prepared from the obtained dianhydrides by a two‐step chemical imidization method. Experimental results indicated that all the PEIs had glass transition temperature in the range of 200–230 °C and the temperature of 5% weight loss in the range of 520–590 °C under nitrogen. The PEIs showed excellent solubility in a variety of organic solvents due to introduction of the bulky pendant groups and were capable of forming tough films. The casting films of PEIs (80–91 μm in thickness) had tensile strengths in the range from 88 to 117 MPa, tensile modulus from 2.14 to 2.47 GPa, and elongation at break from 15 to 27%. The casting films showed UV‐Vis absorption edges at 357–377 nm, low dielectric constants of 2.73–2.82, and water uptakes lower than 0.66 wt %. The spin‐coated films of PEIs presented a minimum birefringence value as low as 0.0122 at 650 nm and low optical absorption at the optical communication wavelengths of 1310 and 1550 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3281–3289, 2010