Configuration of MFI-type zeolite interacting with the probe molecule P(CH<Subscript>3</Subscript>)<Subscript>3</Subscript> – a theoretical study

With P(CH₃)₃ as the probe molecule adsorbed on titanium silicalite (TS-1) zeolite, the special and important role of T12 site in MFI-type zeolite was clearly elucidated. There are altogether three active sites present in TS-1 zeolite with Ti at the T12 site. Owing to the preferential adsorption of probe molecules on the first Brönsted acidic site, the Ti12 center will probably fail to show Lewis acidity. The ionic [HP(CH₃)₃]⁺ species can be stabilized by the first or second Brönsted acidic site, with the former energetically favored. The latter was formed through the transfer of the ionic [HP(CH₃)₃]⁺ species from the first to the second Brönsted acidic site.     

Sorption of Th(IV) ions onto TiO2: Effects of contact time, ionic strength, thorium concentration and phosphate

Summary The sorption of Th(IV) onto TiO₂ was studied by the batch technique as a function of pH and ionic strength at moderate concentration (10^-4-10^-5 mol/l) and in the presence and absence of phosphate. It was found that the sorption rate of Th(IV) was relatively slow, the sorption percent was abruptly increased from pH 2 to 4, and the sorption was decreased with increasing ionic strength as a whole. In the concentration range of Th(IV) from trace concentration to 1.4 ^. 10^-4 mol/l and in the absence of phosphate, the sorption isotherms were roughly fitted the Freundlich equation at different ionic strengths and approximately constant pH. These sorption characteristics of Th(IV) onto TiO₂ were compared with those of uranyl on the same sorbent. In addition, the positive effect of phosphate on the sorption of Th(IV) onto TiO₂ was demonstrated obviously and can be attributed to strong surface binding of phosphate, and the subsequent formation of ternary surface complexes of Th(IV). The difference between the sorption characteristics of Th(IV) ions and uranyl ions onto TiO₂ is discussed.     

C60-吡咯烷衍生物的合成及非线性光学性质的研究

通过富勒烯C₆₀与肌氨酸和有机醛化合物的1,3-偶极环加成反应, 获得了九种含不同有机功能基团的C₆₀吡咯烷衍生物1～9, 用¹H NMR, ¹³C NMR, FTIR, UV-vis和FAB-MS进行了结构表征; 利用皮秒激光光源, 采用z扫描技术测定了分子的三阶非线性超极化率γ⁽³⁾, 结果显示: 化合物3 (γ⁽³⁾＝4.14×10^－33 esu)具有最大的三阶非线性光学系数, 说明增加噻吩共轭链的长度, 使三阶非线性活性增加; 对具有相同共轭链的C₆₀-噻吩吡咯烷衍生物(2, 5, 1和4), 吸电子取代基减小了三阶光学非线性活性, 给电子基增大了三阶光学非线性活性; 同时发现喹啉环2-位键联(7)比4-位(8)有更好的三阶光学非线性活性.     

催化动力学光度法测定痕量锰（Ⅱ）

研究了在Ｎａ２ＨＰＯ４－ＮａＯＨ介质中，Ｍｎ（Ⅱ）催化高碘酸钾氧化镁试剂１［４－（对硝基苯偶氮）间苯二酚］的反应及其动力学条件，建立了一种高灵敏、高选择性测定痕量Ｍｎ（Ⅱ）的新方法。可测０．０１－２．５μｇ／２５ｍＬ范围的锰（Ⅱ），方法的检测限为６．４３×１０＾－１１ｇｍ／ｍＬ。     

Determination of proteins in human serum by combination of flow injection sampling with resonance light scattering technique

A flow injection method combined with Resonance light scattering detection was developed for the determination of protein concentration in human serum samples. This method is based on the enhanced RLS signals of protein binding with the dye acid chrome blue K. The enhanced RLS intensities at 264 nm, in an acidic aqueous solution, were proportional to the protein concentration over the range of 2.0–40.0 μg·mL⁻¹ for human serum albumin (HSA) and the limit of detection (3σ) is 85 ng·mL⁻¹. This method was successfully applied to the quantification of total proteins in human serum samples. The maximum relative standard deviation is less than 2% and the recovery is between 97 and 103% for the standard addition method. The sample throughput was 60 h⁻¹.     

Application of artificial neural networks in multivariable optimization of an on-line microwave FIA system for catalytic kinetic determination of iridium(III)

A new rapid, selective and sensitive on-line microwave flow injection-kinetic method was developed for spectrophotometric determination of micro amounts of Ir(III), based on its catalytic effect on the m-acetylchlorophosphonazo (CPA-mA) and KIO(4) reaction in NaOH media. An on-line microwave oven was employed to accelerate the reaction. The reaction was followed spectrophotometrically by measuring the decrease of the absorbance of CPA-mA at 580 nm. The effect of five variables for the determination of Ir(III) was optimized by means of a multilayer artificial neural network using extended delta-bar-delta (EDBD) algorithms. Under the optimum experimental conditions, Ir(III) could be determined in the range 0.060-0.60 micro gZZZ;mL(-1) with detection limit of 0.02 micro gZZZ;mL(-1) and the sampling frequency of 34 h(-1). The proposed method was applied to the determination of micro amounts of Ir(III) in refined ore and secondary alloy with the recoveries from 91.4% to 109%.     

活性位高度暴露的钴/氮/碳电催化剂的构建及氧还原性能研究

金属/氮/碳催化剂（M/N/C，M=Fe、Co等）是最有发展前景的非贵金属电催化剂之一，其性能依赖于催化剂表面的活性物种密度.通过常规的热解含氮前驱物与金属盐的方法制得的催化剂往往存在金属活性物种被包埋而不能有效利用的缺点.考虑到石墨相氮化碳（g-C₃N₄）富含类吡啶氮和亚纳米孔腔结构，将g-C₃N₄包覆在高导电性碳纳米笼（hCNC）表面，进而利用表层g-C₃N₄的配位和限域作用锚定大量Co²⁺离子，获得的Co/g-C₃N₄/hCNC复合物经热解后形成了活性位高度暴露、导电性好、孔结构丰富的Co/N/C催化剂.800℃热解得到的最优化催化剂在碱性介质中展现出优异氧还原活性，其起始电位（0.97 V）与商业Pt/C催化剂相当，且抗甲醇干扰性能和稳定性优异.此项研究提供了一种构建具有高度暴露活性位的M/N/C催化剂的有效策略.     

DeNOx催化剂FeZSM-5/Raney Fe的制备

用原位晶化法合成了FeZSM-5/RFe(RFeRaney Fe)催化剂. 合成液的组成为5Na2O*100SiO2*10TPABr*7 000H2O,pH＞11.5. 合成液中不含Al,ZSM-5分子筛的骨架Al只来源于Raney Fe的表面. 此法提高了ZSM-5分子筛中骨架Al的稳定性和分子筛上Fe离子的负载量. FeZSM-5/RFe用作DeNOx催化剂时具有较高的活性和水热稳定性.     

有机化合物中硫元素的微量库仑分析

含硫有机化合物在竖式石英燃烧管中,于氧气流下经950℃高温燃烧分解,生成的二氧化硫(或三氧化硫)通过含双氧水的石英棉转化管,转化为硫酸。硫酸泵入电解池后,进行酸-碱库仑滴定。本法操作按时间程序控制进行,每次分析时间为15分钟,分析绝对误差为±0.5％对含磷的有机硫化合物及含钠、铁、铜、钼、镍、镧等金属的有机硫化合物,如在样品上复盖一层三氧化钨进行燃烧分解,也可获得满意的结果。     

地锦草提取物对小鼠肝组织GSH-PX和CAT活性的影响

目的：观察地锦草提取物对小鼠肝组织GSH—PX(谷胱甘肽过氧化物酶)和CAT(过氧化氢酶)活性的影响．方法：地锦草提取物给小鼠连续灌胃28d，1次／d，1ml／次．结果：与空白对照组比较，地锦草提取物可明显提高小鼠肝组织GSH—PX和CAT活性．结论：实验表明，地锦草提取物具有较强的清除自由基及抗氧化、防衰老作用．