中国开源软件生态构建的风险及对策

基于双层嵌入理论和知识溢出理论构建了E-TOMSDECT分析模型,对当前中国开源软件生态构建所面临的风险进行系统性剖析,并结合对全球开源软件生态构建经验的类化分析提出相关对策.分析发现,当前中国开源软件生态构建主要存在关键核心技术支撑与生态运营模式掌握薄弱、生态建设主体动力不足、在国际开源生态中主导权较弱且面临多维度安全风险、软硬件协同发展能力较弱、软件价值评估体系扭曲、生态运营专业性人才匮乏以及国际经验的利用潜能未能完全释放等风险.建议尽快聚焦新兴领域打造"三位一体"开源生态主导核心,同时加强软硬协同整体规划,构建开源软件生态的安全风险评估和应急防控机制,加大开源软件生态构建的人才培养与引进力度.     

考虑外界影响的元动作单元故障概率模型

为描述数控机床运动构件的故障率随时间变化的情况,本文从元动作单元出发,建立了一个关于元动作单元的故障概率模型.首先,根据元动作单元故障发生的原因将故障分成两类,随机故障和老化故障.然后,根据这两种故障类型故障数据的不同特点,选用两个不同的概率分布函数分别进行描述,随机故障用泊松分布进行描述,老化故障用威布尔分布进行描述.接着,给出这两种故障概率模型中各参数的物理意义和估计方法.更进一步,工作负载和工作环境会分别对元动作单元的老化故障和随机故障的故障率造成影响.为比较这两者对故障率影响的大小,提出了工作负载参数R l和工作环境参数R e,并给出这两个参数的估计方法.最后,根据收集到的运动构件的故障数据作出频率直方图,同时,对故障数据进行参数估计得到概率密度函数,并将这两者画在同一幅图上,发现两者具有较好的拟合效果.表明提出的元动作单元故障概率模型适合于描述运动构件故障率随时间的变化,模型有效.     

非锚固式大型立式热质储罐强度分析

针对大型储罐在多种载荷作用下易发生强度破坏的问题，以某热质储罐为研究对象，利用有限元法分析热质储罐在自重、内压、液柱静压力、风载荷、地震载荷、雪载荷以及温度载荷作用下的应力强度以及变形，模拟大角焊缝区域翘曲情况，并依照JB4732—1995进行强度评定，为此类大型立式储罐的设计提供参考。     

基于重抽样分布的一类模糊累积和控制图

过程变量在代表产品或服务过程信息时并非完美，而使用模糊数可能是另一较好途径。文章进一步完善模糊累积和控制图，其中使用中心和扩展具有重抽样分布的模糊随机变量，并给出模拟例证。     

An improved LC–MS/MS method for determination of docetaxel and its application to population pharmacokinetic study in Chinese cancer patients

Because of its unpredictable side effects and efficacy, the anticancer drug docetaxel (DTX) requires improved characterisation of its pharmacokinetic profiles through population pharmacokinetic studies. A sensitive and rugged LC–MS/MS method for the detection of DTX in human plasma was developed and optimised using paclitaxel as an internal standard (IS). The plasma samples underwent rapid extraction using hybrid solid-phase extraction-protein precipitation. The analyte and IS were separated with an isocratic system on a Zorbax Eclipse Plus C₁₈ column using water containing 0.05% acetic acid along with 20 μM of sodium acetate and methanol (30/70, v/v) as the mobile phase. Quantification was performed using a triple quadrupole mass spectrometer through multiple reaction monitoring in positive mode, using the m/z 830.3 → 548.8 and m/z 876.3 → 307.7 transitions for DTX and paclitaxel, respectively. The range of the calibration curve was 1–500 ng/mL for DTX, and the linear correlation coefficient was >0.99. The accuracies ranged from −4.6 to 4.2%, and the precision was no higher than 7.0% for the analytes. No significant matrix effect was observed. Both DTX and the IS showed considerable recovery. This method was finally applied to the establishment of a population pharmacokinetic model to optimise the clinical use of DTX.     

Comprehensive Profiling by Non-targeted Stable Isotope Tracing Capillary Electrophoresis-Mass Spectrometry: A New Tool Complementing Metabolomic Analyses of Polar Metabolites

Mass spectrometry (MS) driven metabolomics is a frequently used tool in various areas of life sciences; however, the analysis of polar metabolites is less commonly included. In general, metabolomic analyses lead to the detection of the total amount of all covered metabolites. This is currently a major limitation with respect to metabolites showing high turnover rates, but no changes in their concentration. Such metabolites and pathways could be crucial metabolic nodes (e.g., potential drug targets in cancer metabolism). A stable-isotope tracing capillary electrophoresis–mass spectrometry (CE-MS) metabolomic approach was developed to cover both polar metabolites and isotopologues in a non-targeted way. An in-house developed software enables high throughput processing of complex multidimensional data. The practicability is demonstrated analyzing [U-¹³C]-glucose exposed prostate cancer and non-cancer cells. This CE-MS-driven analytical strategy complements polar metabolite profiles through isotopologue labeling patterns, thereby improving not only the metabolomic coverage, but also the understanding of metabolism.     

TBOR-shaped electro-optic modulator with dual output based on double-layer graphene

We proposed an electro-optic modulator with two-bus one-ring (TBOR) structure to improve the extinction ratio and reduce insert loss. It has a dual output compared with one-bus one-ring structure. In addition, double-layer graphene makes it possible for the modulation in the visible to mid-infrared wavelength range. It shows that this new electro-optic modulator can present two switching states well with low insertion loss, high absorption and high extinction ratio. At $\lambda =1550\text{ nm}$, when the switching states are based on the chemical potential, ${\mu }_{\mathrm{c}}=0.38\text{ eV}$ and ${\mu }_{\mathrm{c}}=0.4\text{ eV}$, the insertion losses of both output ports are less than 2 dB, the absorption of the output port coupled via a micro-ring reaches 45 dB and the extinction ratio reaches 14 dB. When the refractive index of the dielectric material is 4.2, the applied voltage will be less than 1.2 V, thus can be used in low-voltage CMOS technology.     

腐殖酸分子结构对电-Fenton性能的影响探究

采用超滤分级得到不同分子量的腐殖酸组分,并通过傅里叶红外、紫外可见、三维荧光光谱等表征其分子结构的差异.用基于Pd/Fe3O4纳米催化剂的新型电芬顿技术去除不同分子量的腐殖酸与Cr(VI)形成的复合污染物.研究表明,随着腐殖酸分子量的增大,其矿化效果越好,HA5(87.6%) HA4(79.0%) HA3(76.8%) HA2(70.0%) HA1(62.9%),且短时间内高分子量腐殖酸有较好的去除.这归因于高分子量腐殖酸表面的阴离子与Pd/Fe3O4发生静电吸附.此外,苯环取代度更高、共轭结构更多的高分子腐殖酸优先被原位生成的·OH氧化为多羟基化中间体,进而氧化开环,最终矿化为CO2和H2O.而在TOC相同条件下,低分子量腐殖酸中短链羧酸占比较高,其与·OH的反应活性低,矿化速率慢.总铬的去除同样遵循HA5(91.8%) HA4(88.2%) HA3(85.9%) HA2(85.4%)HA1(85.1%)的顺序,因为高分子量腐殖酸中含有更多能与Cr发生络合作用的活性位点,可在电解体系中协同去除Cr.本研究表明了腐殖酸分子结构对金属纳米颗粒协同电化学氧化性能和与重金属相互作用的影响,为揭示腐殖酸与Cr(VI)复合污染物的环境行为及其有效去除提供重要参考.     

高职院校工程造价专业课程评价探讨

课程评价是高职院校课程实践和课程改革中不可忽视的环节。目前高职院校课程理论研究远远落后于课程实践,课程评价研究尤为滞后,因此,开展课程评价研究对于指导高职课程建设、提高课程建设质量十分必要。该文通过对课程评价含义、评价原则、评价主体、评价方法、评价手段等几个侧面问题的探讨,结合该研究者所在学校开展的项目化课程改革研究成果,提出了构建高职院校工程造价专业课程评价体系的思路,以期为高职工程造价专业课程评价改革提供实践依据。