用于荧光光谱测定的微量固体粉末样品制样优化*

为满足微量固体粉末荧光检测要求,采用薄层制样法,改变黏结剂种类、黏结剂的用量、涂层厚度以及后处理方法来进行其制样工艺优化。 结果表明:以聚乙烯醇做黏结剂、1∶5的固液比、在50 ℃烘干30 min、涂片次数3层的薄层制样优化工艺可满足荧光固体测样的要求。采用t检验比较固体样品池装样和薄层制样法的荧光检测结果发现两者无显著性差异,薄层制样优化工艺的需样量较样品池减少90%。     

职前与在职化学教师对教学能力认知差异的实证研究*

采用定量的方法对112位化学师范生和83位中学化学教师进行问卷调查,了解职前、在职教师对教学能力要素重要性认识的情况,问卷涉及本体要素、工具要素、条件要素、实践要素、情意要素和发展要素等6大维度。基于Rasch测量模型,利用ConQuest,Winstep,SPSS22.0软件对数据进行统计分析。研究发现:(1)问卷具有良好的信效度;(2)师范生、在职教师均把情意要素作为教学能力的首要成分,其次依次是本体要素、发展要素、实践要素,工具要素与条件要素排在其他要素之后;(3)工具要素重要性赞同度师范生显著高于在职教师,其余维度差异不显著,不同性别各维度重要性赞同度也无显著性差异;(4)由ConQuest多维分析所建立的项目被试图可以直观展示不同维度上各教学能力的重要程度。     

Controllable Synthesis of Hollow Multishell Structured Co3O4 with Improved Rate Performance and Cyclic Stability for Supercapacitors

Hollow multishelled structures(HoMSs)Co3O4 with specially appointed shell number(double-,triple-and quadruple-)were accurately prepared by a sequential templating approach.Due to the superiorities of inimitable porous multishelled structure,triple-HoMSs Co3O4 achieved the best performance among all the samples with a specific capacitance of 1028.9 F/g at 10 mV/s and 688.2 F/g at 0.5 A/g,respectively.Furthermore,the electrode delivered a high rate performance(89.8%retention at 10 A/g)and excellent cycle stability(6.8%loss over 2000 cycles),showing a great promise for practical application in the future.     

Boosting Photocatalytic Oxygen Evolution: Purposely Constructing Direct Z-Scheme Photoanode by Modulating the Interface Electric Field

Ti-Fe₂O₃ photoanode has received widespread attention in photoelectrochemical(PEC) water spilling because of its optimized oxidative and reductive capability of composites catalyst. However, its low efficiency could limit its development. Herein, in order to improve the efficiency of PEC water spilling, the all-solid-state direct Z-scheme Ti-ZnFe₂O₄/Ti-Fe₂O₃(TZFO/Ti-Fe₂O₃) nanorod arrays composited with the ideal energy band structure are synthesized by modulating the Fermi level of TZFO for PEC water splitting. The photophysical methods in this work, including the Kelvin probe measurement and transient photovoltage spectroscopy(TPV) measurement, are applied to explore the migration behavior of electric charges at the enhanced interface electric field. Finally, the Z-scheme charge transfer mechanism of TZFO/Ti-Fe₂O₃ photoanode is proved successfully. Benefiting from the desirable charge transfer at interface electric field, the TZFO/Ti-Fe₂O₃ exhibits the outstanding photocatalytic oxygen evolution reaction(OER) performance, and the photocurrent of 60TZFO/Ti-Fe₂O₃ photoanode reaches 2.16 mA/cm² at 1.23 V vs. reversible hydrogen electrode(RHE), which is three times higher than that of pure Ti-Fe₂O₃ photoanode. This work provides a facile approach of modulating interface electric field to optimize the Z-scheme charge-transfer process.     

保健食品中非法添加物检测的前处理及分析方法研究进展

保健食品作为一种特定的食品种类,能调节人体的机能,适用于特定人群食用.但是在保健食品中添加化学药物和非法添加物的现象也层出不穷,因此迫切需要建立多指标的有效检测方法,为保健食品的质量安全提供技术保障.高效的前处理方法和高灵敏的分析方法为检测非法添加物提供了有效的技术手段.综述了近三年来溶剂萃取和固相萃取样品前处理方法,以及高效液相色谱、实时直接分析质谱、表面增强拉曼光谱及色谱-质谱串联技术等分析方法在微量及痕量非法添加物检测中的应用,为进一步研究建立高效简便的前处理方法和检测新方法、新技术提供理论参考.     

Effects of mechanical loadings on the performance of a piezoelectric hetero-junction

A fully-coupled model for a piezoelectric hetero-junction subjected to a pair of stresses is proposed by discarding the depletion layer approximation. The effect of mechanical loadings on PN junction performance is discussed in detail. Numerical examples are carried out for a p-Si/ZnO-n hetero-junction under a pair of stresses acting on the ntype ZnO portion near the PN interface, where ZnO has the piezoelectric property while Si is not. It is found that the bottom of conduction band is lowered/raised near the two loading points due to the decrease/increase in the electron potential energy there induced by a tensile-stress mode via sucking in majority-carriers from two outside regions, which implies appearance of a potential barrier and a potential well near two loading points. Furthermore, the barrier height and well depth gradually become large with increasing tensile stress such that more and more electrons/holes are inhaled in loading region from the n-/p-zone, respectively. Conversely, rising/dropping of conduction band bottom is brought out near the two loading points by a compressive-stress mode due to the increase/decrease in the potential energy of electrons by pumping out the majority-carriers from the loading region to the two outside regions. Therefore, a potential well and a potential barrier are induced near the two loading points, such that more and more electrons/holes are driven away from the loading region to the n-zone/p-zone, respectively, with the increasing compressive stress. These effects are important to tune the carrier recombination rate near the PN interface. Thus, the present study possesses great referential significance to piezotronic devices.     

基于泰勒展开的二阶层次分析法初探

经典AHP常用于武器装备效能或能力评估,然而经典AHP采用线性加权模型,即通过底层指标效能线性加权得到顶层指标效能,对非线性体系往往会引入较大评估误差,易产生决策性错误。为解决这一问题,本文以底层指标效能值等于1/2为展开点,给出基于泰勒展开的二阶加权模型,对线性体系,二阶加权模型可退化为经典线性加权模型;推导出二阶AHP的数学表达式,给出二阶AHP效能评估步骤,构建二阶AHP的基本框架。算例表明,二阶AHP评估结果相比经典AHP更接近于解析解,产生决策性错误的机率远小于经典AHP。     

[100]LiF单晶在60 GPa以内冲击加载下的高压屈服强度特性

获取光学窗口自身的高压强度特性是开展材料高压高应变率冲击响应行为精密测量和数据反演的重要基础。利用平板撞击和双屈服面法,通过冲击-卸载、冲击-再加载原位粒子速度剖面精细测量和数据反演,获得了约60 GPa范围内[100]LiF屈服强度特性随冲击压力的变化规律。结果表明:在实验压力范围内,[100]LiF的屈服强度随加载压力的提高而显著提高,压力硬化效应显著;同时,LiF在冲击加载下的屈服强度高于磁驱准等熵加载结果,应变率硬化效应强于热软化效应。采用Huang-Asay模型确定了可描述冲击加载[100]LiF强度特性的本构模型参数,为LiF在强度、相变、层断裂等加窗测量实验中的深入应用和数据准确解读提供了重要支撑。     

火灾与撞击联合作用下钢管混凝土柱力学性能研究

为研究火灾高温与撞击联合作用下钢管混凝土柱的力学性能,基于ABAQUS建立了高温作用下考虑轴力影响的钢管混凝土柱侧向撞击有限元模型。首先,对高温与撞击联合作用下考虑轴力影响的钢管混凝土柱的破坏模式与受力全过程进行了分析,探讨了高温下钢管混凝土柱的抗撞性能与工作机理;其次,重点研究了受火时间、材料强度、含钢率以及撞击能量对抗撞性能的影响,并给出了相关设计建议。研究结果表明:高温与撞击联合作用下,钢管混凝土柱主要发生受弯破坏;受火15 min后,构件抗撞性能明显降低。轴压力对构件抗撞性能产生不利影响,轴压比从0增加到0.2,受火60 min构件抗撞性能下降了7.8%;混凝土强度对高温下钢管混凝土柱抗撞性能有显著影响,受火90 min后,混凝土强度由30 MPa增加到50 MPa,构件抗撞性能提高约85%;外钢管强度与含钢率对高温下抗撞性能影响不大。