SYNTHESIS AND MESOMORPHIC PROPERTIES OF FISHBONE-LIKE LIQUID CRYSTALLINE POLYSILSESQUIOXANES——Ⅰ. FISHBONE-LIKE, β-DIKETONE-BASED LIQUID CRYSTALLINE POLYSILSESQUIOXANES AND THEIR COPPER COMPLEXES*

Two kinds of fishbone-like, β-diketone-based liquid crystalline polysilsesquioxanes(FBDKLCP'S), homopolymeric (H-FBDKLCP) and copolymeric (C-FBDKaLCP) have been first synthesized via the hydrosilylation reaction of a vinyl-terminated β-diketone with the homopolymeric ladderlike polyhydrosilsesquioxane (LPHSQ) and random copolymethylhydrosilsesquioxane (LRPMHSQ) respectively. These new kinds of FBDKLCP with M of 10~4 is thermotroic liquid crystalline polymer and its clearing temperatures T_i's and mesophase range △T's are much higher than those of the corresponding comb-like β-diketone liquid crystalline polysiloxane (DKLCP) by about 200℃. Similar results have been observed with the comparison of the two different structure Cu-coordinating compounds The significant increases in T_((?))'s and △T's of the FBDKLCP and Cu-FBDKLCP are mainly attributed to the great rigidity of the ladderlike polysilsesquioxane backbone.     

流变学法研究部分水解聚丙烯酰胺/Cr(III)交联反应I.浓度的影响

采用流变学法系统地考察了部分水解聚丙烯酰胺（HPAM）/Cr(III)交联体系的 反应动力学。HPAM溶液的粘性模量G”大于弹性模量G’,且其数值随时间不发生变 化,体系为粘性溶液。而HPAM/Cr(III)体系的G’和G”的数值都随时间变化,G” 在反应开始阶段大于G’,当反应进行一段时间后,G’超过G”占据主要地位,体 系成为弹性体系。交联过程可分为三个阶段：第一上升阶段,平缓上升阶段和第二 上升阶段。利用G’～ t曲线可以推测反应机理。实验发现成胶速率随反应物HPAM 和Cr(III)的浓度的增加而增加,而成胶时间缩短。在羧基浓度过量的情况下,交 联反应对Cr(III)浓度的反应级数是1。凝胶的有效弹性交联密度随聚合物浓度的增 加而增,且随凝胶反应的进行而增加。凝胶的交联点间的平均分子量随Cr(III)浓 度的增加和交联反应的进行而下降。     

半化学法制备Pb(Fe2/3W1/3)O3陶瓷粉体的反应机理

铅系弛豫铁电陶瓷钨铁酸铅Pb(Fe2/3W1/3)O3(PFW)是一种重要的介电材料,具有较大的介电常数(8000)和较低的烧结温度(小于900℃),适用于制备低烧高介的多层陶瓷电容器犤1～4犦。在传统氧化物法合成PFW的过程中,易生成恶化介电性能的钨酸铅(PbWO4或Pb2WO5)或焦绿石相(Pb2FeWO6)等其他相犤3,4犦。尽管通过加入过量5%的Fe2O3可以消除这些其他相,但因含较多的变价铁离子(Fe3+和Fe2+)而产生介电老化的缺点犤5犦。虽然二次合成法被广泛用于制备铅系弛豫铁电陶瓷犤6犦,但对制备PFW陶瓷的效果并不明显,仍有少量的钨酸铅PbWO4存在,并且预烧…     

水热法合成K0.5Bi0.5TiO3纳米陶瓷粉体

K_0.5Bi_0.5TiO₃(KBT)nanocrystalline particles were hydrothermally synthesized from Bi(NO₃)₃·5H₂O, TiO₂ and KOH. The crystal phase, chemical composition and microstructure were characterized by XRD, XRF, Raman scattering spectroscopy and TEM. The results indicated that the products were pure perovskite structured K_0.5Bi_0.5TiO₃ with chemical stoichiometry and perovskite structure. The TEM observation revealed that the particles possessed a feature of cubic shape and a nano-scale of about 40 nm. The KBT ceramics sintered at 1 040 ℃ from hydrothermal powders show higher density and better electric properties than that prepared by a solid-state reaction method.     

壳聚糖作用下一步法合成具有高电活性的AgCl@聚苯胺核壳结构

在壳聚糖的作用下，采用简单的一步法合成了具有星状结构的氯化银/聚苯胺核壳型复合材料。当壳聚糖的浓度为1%时，所制备的氯化银/聚苯胺复合材料具有高度的分散性，壳层厚度为30～80 nm、核的直径在25～60 nm范围内。通过透射电镜、红外光谱和X-射线衍射对样品的形态和组成进行了表征。循环伏安实验结果表明这种复合材料在中性条件下具有很好的电化学活性。     

聚羟基丁酯酯缓释微球的制备及性能

用溶剂蒸发法制备了以新型生物可降解材料聚羟基丁酸酯为载体、以安定为模药的缓释微球,讨论了药物与载体之比对药物含量与包封率的影响,以及制备微球条件对药物释放性能的影响;微球平均粒径为３０～４０μｍ,粒径分布在１～１．５之间,最大载药量为１９．５１％;最高包封率为６７．１１％;体外累积释放曲线呈“两相”释放特征并拌随初始的“突释效应”。扫描电镜观察微球表面呈皱缩表观形态结构,微球内部横断面具有孔道与孔     

具有超大通道结构的介孔氧化硅柱层状钛酸的合成和催化应用初探

A mesoporous (d=2.3mm) silica-pillared layered tetratitanate with a super gallery (d₀₀₁=1.84mm)was prepared by first preswelling layered tetratitanate with n-dodecyl amine, then reacting with 20wt% NH₂(CH₂)₃Si(OC₂H₅)₃ aqueous solution, and finally calcinating the resultant solid product in air at 550℃. All the reaction was carried out hydrothermally in an autoclave at 130℃. The obtained material has a relatively high BET surface area of 204m²·g^-1 and a thermal stability beyond 600℃. The catalytic application of the material was also investigated by using the dehydration of isopropanol and the reform of n-hexane as two probing reactions.     

Chemoenzymatic Synthesis of Cellular Adhesion Tripeptide RGD Precursor in Organic Media

IntroductionA characteristic tripeptide sequence Arg-Gly-Asp(RGD) that is found within fibronectin and other rela-ted adhesion molecules in extracellular matrices(ECM)has received considerable attention from researcherssince it was proved to be a recognit…     

Photovoltaic Characteristics of a Naphthylamine Derivative

Organic photovoltaic （OPV） cells were fabricated via vacuum vapor deposition with {4-[2-（3-di-cyanomethylidene-5,5-dimethylcyclohexenyl）vinyl]phenyl}di（1-naphthyl）amine （DNP-2CN） as the electron donor, and fullerene （C60） as the electron acceptor. A thin film （10 nm） of tris（8-quinolinolato）aluminum （Alq3） was adopted as the buffer layer. A device based on this DNP-2CN exhibited an open circuit voltage （Voc） of 370 mV, a short-circuit current density （Jsc） of 0.61 mAocm 2, and a white-light power conversion efficiency （ η） of 0.09% （AM1.5, 75 mW.cm^- 2）.     

醋酸乙烯酯-马来酸酐共聚物与水解聚丙烯酰胺高分子络合物的研究

<正> 某些高分子在溶液中可以通过次价力形成高分子络合物.根据次价力的不同,可分为四类:聚电解质络合物、氢键络合物、立体络合物和电荷转移络合物.部分水解聚丙烯酰胺(简称HPAM)是在水悬浮体中被广泛使用的絮凝剂,醋酸乙烯酯-马来酸酐共聚物(简称VAMA)是一种能力很强的泥浆稀释剂.研究二者在水溶液中的相互作用,在理论上和应用上都有重要意义.我们曾研究了粘土对它们的吸附作用、改变泥浆流变性以