具有超大通道结构的介孔氧化硅柱层状钛酸的合成和催化应用初探

A mesoporous (d=2.3mm) silica-pillared layered tetratitanate with a super gallery (d₀₀₁=1.84mm)was prepared by first preswelling layered tetratitanate with n-dodecyl amine, then reacting with 20wt% NH₂(CH₂)₃Si(OC₂H₅)₃ aqueous solution, and finally calcinating the resultant solid product in air at 550℃. All the reaction was carried out hydrothermally in an autoclave at 130℃. The obtained material has a relatively high BET surface area of 204m²·g^-1 and a thermal stability beyond 600℃. The catalytic application of the material was also investigated by using the dehydration of isopropanol and the reform of n-hexane as two probing reactions.     

Chemoenzymatic Synthesis of Cellular Adhesion Tripeptide RGD Precursor in Organic Media

IntroductionA characteristic tripeptide sequence Arg-Gly-Asp(RGD) that is found within fibronectin and other rela-ted adhesion molecules in extracellular matrices(ECM)has received considerable attention from researcherssince it was proved to be a recognit…     

Photovoltaic Characteristics of a Naphthylamine Derivative

Organic photovoltaic （OPV） cells were fabricated via vacuum vapor deposition with {4-[2-（3-di-cyanomethylidene-5,5-dimethylcyclohexenyl）vinyl]phenyl}di（1-naphthyl）amine （DNP-2CN） as the electron donor, and fullerene （C60） as the electron acceptor. A thin film （10 nm） of tris（8-quinolinolato）aluminum （Alq3） was adopted as the buffer layer. A device based on this DNP-2CN exhibited an open circuit voltage （Voc） of 370 mV, a short-circuit current density （Jsc） of 0.61 mAocm 2, and a white-light power conversion efficiency （ η） of 0.09% （AM1.5, 75 mW.cm^- 2）.     

醋酸乙烯酯-马来酸酐共聚物与水解聚丙烯酰胺高分子络合物的研究

<正> 某些高分子在溶液中可以通过次价力形成高分子络合物.根据次价力的不同,可分为四类:聚电解质络合物、氢键络合物、立体络合物和电荷转移络合物.部分水解聚丙烯酰胺(简称HPAM)是在水悬浮体中被广泛使用的絮凝剂,醋酸乙烯酯-马来酸酐共聚物(简称VAMA)是一种能力很强的泥浆稀释剂.研究二者在水溶液中的相互作用,在理论上和应用上都有重要意义.我们曾研究了粘土对它们的吸附作用、改变泥浆流变性以     

SINGLE AND BINARY ADSORPTION PERFORMANCE OF SALICYLIC ACID AND 5-SULFOSALICYLIC ACID ONTO HYPERCROSSLINKED POLYMERIC ADSORBENTS

Single and binary adsorption behaviors of salicylic acid and 5-sulfosalicylic acid onto hypercrosslinked polymeric adsorbents, i.e. NDA-101 and NDA-99 were investigated. The Freundlich model can successfully describe all the adsorption isotherms tested, which indicates a favorable and exothermic adsorption process. The adsorption of salicylic acid relies on π-π interaction, while the electrostatic interaction further influences the adsorption of 5-sulfosalicylic acid onto NDA-99. The adsorptive capacity of salicylic acid on NDA-99 decreases but increases on NDA-101 with 5-sulfosalicylic acid as the background component in a binary solute system. The amount of 5-sulfosalicylic acid adsorbed was decreased with the increase in initial concentration of salicylic acid on both adsorbents. The competition for the adsorption sites is considered to be predominant in the solid-to-liquid interaction process. The adsorption selectivity of salicylic acid onto NDA-101 is higher than onto NDA-99 by more than an order of magnitude. Thus, combination technique involving NDA-101 followed by NDA-99 can be effectively applied to separate and recover salicylic acid and 5-sulfosalicylic acid from wastewater.     

含聚醚间隔链的扩链脲改性环氧树脂/双氰双胺固化体系性能研究

合成了一系列含不同分子量聚环氧丙烷 (PPG)柔性间隔链的扩链脲 ,系统考察了扩链脲改性环氧树脂E 5 1/双氰双胺 (dicy)固化体系的固化反应活性、动态力学行为、冲击性能和断裂面形态结构 ,并对体系的冲击性能、形态结构与动态力学行为之间的关系进行了探讨 .结果表明 ,改性体系固化反应活性明显提高 ,固化反应表观活化能降低 ,固化反应峰顶温度从 190℃降低至 14 0℃ ,固化反应的表观活化能由 14 5 5kJ/mol降至 70～ 80kJ mol;改性体系冲击强度明显提高 ,其中所含PPG柔性链分子量为 10 0 0的扩链脲改性的E 5 1/dicy体系冲击强度较未改性的E 5 1/dicy体系提高了 8倍 ,其冲击试样断裂面的形态具有明显的韧性断裂特征 ,微观两相网络结构的存在导致了改性体系冲击强度显著提高     

多尺度自适应Gamma矫正的低照图像增强

为了在提高低照图像的亮度和对比度的同时,保持图像的色彩自然度,提出了多尺度自适应Gamma矫正的低照图像增强方法.鉴于HSI颜色空间的明度分量Ⅰ决定着图像的明暗程度,以及明度分量的多尺度特性,首先,将图像转换到HSI颜色空间,对明度分量Ⅰ进行多尺度Retinex分解;然后,对分解得到的多尺度光照图像分别进行自适应的Gamma矫正,其中Gamma指数自适应于暗区像素的占比,鲁棒地改善光照图像的光照分布,经Retinex反变换得到增强的多尺度明度分量;最后,将增强的多尺度明度分量的线性融合作为增强的明度分量Ⅰ’,与色相分量H和饱和度分量S重组,得到最后的增强图像.实验结果表明,相对于部分最新提出的现有方法,新方法的PSNR和SSIM值分别高出1.19 dB和1.8%以上,具有更好的增强效果和鲁棒性,增强图像的视觉效果更适宜,对比度更高.     

正交激励超声切削装置的椭圆轨迹偏转与校正

为研究超声椭圆振动切削（ultrasonic elliptical vibration cutting,UEVC）刀尖轨迹形成及控制,解决刀尖轨迹非正椭圆问题,建立二维正交柔性导波UEVC装置刀尖轨迹的运动学模型;分析90°相位差下非正椭圆轨迹产生原因,建立刀尖轨迹校正模型,并推导出基于正椭圆轨迹下的刀尖轨迹偏转模型。通过实验对刀尖轨迹校正模型进行验证,校正后轨迹偏离坐标轴1.67°,小于校正前偏离角度。实验结果表明,该模型能够有效地校正刀尖轨迹,可在轨迹控制方面为后续研究刀尖轨迹偏转及变刀尖轨迹超声振动加工提供理论基础。     

基于改进YOLOv5的遥感图像飞机目标检测

针对遥感图像中飞机检测尺寸大小不一、背景复杂导致的难以识别问题,提出一种基于YOLOv5网络模型的改进方法。首先,在YOLOv5网络模型中融入Swin-Transformer模块,使网络全局建模并使全维度信息交互,以提升网络的特征提取能力;其次,对损失函数进行优化,引入SIOU损失函数以考虑真实框和预测框之间的向量角度问题。对比实验表明,优化前后网络模型检测精度均为95.3%。在检测精度相同的情况下,改进后的网络模型召回率为91.2%,比改进前提升0.6个百分点;改进后平均检测精度mAP_0.5为95.7%,比改进前提升0.2个百分点。结果表明,改进后的YOLOv5网络模型能在一定程度上提升遥感图像中飞机目标检测性能。     

纤维编织网增强ECC夹心保温复合墙板抗弯性能

目前,夹心保温墙板已经被广泛使用在建筑保温结构中,但是墙板的饰面层通常采用普通混凝土,使得内部保温材料极易因外饰面开裂脱落而受到腐蚀.因此,选用纤维编织网增强工程水泥基复合材料（Engineered Cementitious Composites,ECC）作为饰面层,通过四点弯曲试验研究夹心保温复合墙板的抗弯性能,影响因素包括保温材料类型、保温层厚度、面层厚度、纤维编织网处理方式、有无连接件和连接件角度.结果表明：增大保温层厚度对墙板抗弯承载力和延性的影响不大,但能够提高墙板的组合程度;发泡聚苯乙烯（Expanded Polystyrene,EPS）保温板与ECC基体的黏结性能更好,墙板的组合程度也更高,但EPS自身的受力性能和刚度较差,使得墙板的承载能力较低;纤维编织网经过浸渍和浸胶黏砂处理会降低墙板的承载能力,但浸胶黏砂处理能提高ECC基体与纤维编织网的黏结从而改善墙板的延性;连接件的存在能够提高墙板的组合性能,并且减小连接件角度或者增大面板厚度有助于提升墙板的抗弯刚度、承载能力和组合性能,但会导致墙板的延性下降.最后,推导了纤维编织网增强ECC（Textile Reinforced ECC,TRE）夹心保温墙板抗弯承载力计算公式,并将计算结果与试验结果进行对比,结果表明提出的计算方法具有一定的可行性.