Comparative study on the synthesis, photoluminescence and application in InGaN-based light-emitting diodes of TAG:Ce phosphors

Cerium-doped terbium aluminum garnet phosphors, Tb₃Al₅O₁₂:Ce³⁺ (TAG:Ce³⁺), were prepared with different methods: co-precipitation (CP), half dry-half wet (HDHW), sol-combustion (SC) and Pechini method plus conventional solid state reaction (SS) method. Comparative study on the phase-formation, particle size, morphologies and luminescent characteristics of the phosphors synthesized with different methods was carried out by means of XRD, FE-SEM and photoluminescence (PL) analysis and SC method was confirmed by the comparison of the results to be an easy and an effective process for preparing efficient and nano-sized Tb₃Al₅O₁₂:Ce³⁺ phosphors. Various factors influencing particle size, morphology and PL of the phosphors, such as precursor preparation, reaction temperature and heating time, were also investigated. Light-emitting diodes (LEDs) were fabricated with each phosphor and a ∼460 nm emitting InGaN chip. The LEDs from SS, HDHW and CP exhibit strong white emission while those from SC and Pechini emit yellow, revealing that the emission characteristics of LEDs are influenced not only by the morphology and the particle size of the phosphors, but also by the preparing process of the phosphors.     

铂锡双金属催化剂上丙烷脱氢反应研究

对比研究了Ｓｎ／Ｐｔ比为１；１，２，：１和５：１的原子簇担载于γ－Ａｌ２Ｏ３上制成的Ｐｔ＝Ｓｎ原子簇催化剂，和用ＳｎＣｌ２和Ｈ２ＰｔＣｌ６浸渍制备的相应Ｓｎ／Ｐｔ比的催化剂对丙烷脱氢生成丙烯的催化性能。     

Electronic structures of dihedral (D5h, D5d, D6h, D6d) fullerenes

By means of our proposed method for Hückel theory calculation, we have calculated the electronic structures of dihedral (D_5h, D_5d, D_6h, D_6d) fullerences, which are generated from icosahedral C₂₀, C₆₀, C₈₀, C₁₈₀, C₂₄₀ and C₅₄₀, respectively. From the calculated results of 1224 fullerence molecules, certain rules on the stability and chemical reactivity have been drawn for such types of dihedral fullerenes.     

Density of supercritical CO_2-tetrahydrofuran binary mixture and the partial molar volume of the cosolvent

The densities of supercritical CO2-tetrahydrofuran (cosolvent) binary mixture weremeasured at temperatures in range of 308.15 to 323.15 K and at pressure up to 16.5 MPa.The concentrations of tetrahydrofuran were from 0 to 0.57 mol/L.The partial molar volume of tetrahydrofuran was calculated based on the relationship between the density of the mixture and the concentration of the cosolvent.It is observed that the partial molar volume of the cosolvent is negative and the absolute value decreases with increasing pressure and the concentration of the cosolvent.     

Resonance Rayleigh scattering method for the recognition and determination of double-stranded DNA using amikacin

In weakly acidic buffer medium, the interaction of amikacin with calf thymus DNA, yeast RNA and denatured DNA has been investigated by using resonance Rayleigh scattering (RRS) technique. The result shows that calf thymus DNA is capable of enhancing the RRS intensity of the amikacin, while yeast RNA and denatured DNA have very little enhancement effect. Based on the characteristics, a sensitive assay for detecting double-stranded DNA in the presence of denatured DNA and yeast RNA has been developed. The enhancement of the RRS signal is directly proportional to the concentration of double-stranded DNA in the range 0.02-12.0 μg ml⁻¹ for calf thymus DNA and its detection limit (3σ) is 2.5 ng ml⁻¹. The method shows a wide linear range and high sensitivity, and almost no interference can be observed from RNA, denatured DNA, amino acid and most of the metal ions. The trace amounts of nucleic acid in synthetic samples and practical samples are determined with satisfactory results. Therefore, the proposed method is promising for as an effect means for recognition in vivo and determination in situ of double-stranded DNA.     

季铵盐用于示波极谱滴定法测定培氟沙星和环丙沙星

介绍采用季铵盐 十六烷基三甲基溴化铵作滴定剂的示波极谱滴定法测定培氟沙星和环丙沙星含量的方法。在pH 4 .8HAc NaAc缓冲溶液中 ,培氟沙星和环丙沙星均能与四苯硼钠 (Na TPB)作用生成沉淀 ,干过滤后 ,用十六烷基三甲基溴化铵标准溶液代替在示波极谱滴定法中常用的有毒硫酸亚铊作为滴定剂 ,回滴滤液中过量的Na TPB ,由示波极谱图 [dE dt=f(E)曲线 ]上TPB的切口消失指示终点。本法终点直观、灵敏 ,操作简便、快速 ,应用于多批原料药样品的测定 ,均获得满意的结果 ,其回收率在 99.9%～ 10 0 .3%之间 ,最大相对误差 <± 0 .3% ,与非水滴定法测得结果基本吻合。     

黄原胶以三价铬交联的水凝胶的脱水行为

对黄原胶／三价铬水凝胶在７０，８０和９０℃下的脱水行为进行了研究．脱水与凝胶的交联密度即参与交联反应的三价铬的含量有密切联系．突发脱水之后的过程可以用一级反应动力学描述，反应速度常数随三价铬的浓度和温度的增高而增大，活化能为３４．５ｋｃａｌ／ｍｏｌ．一价盐（ＮａＣｌ）的含量对脱水过程没有影响．     

缓慢炭化部分氧化对制备煤质活性炭的影响

研究了炭化升温速度、炭化低温区引入空气部分氧化对活性炭制备过程中炭化阶段、炭化物结构、活性炭性能等的影响。结果表明，炭化时低温部分氧化可提高炭化物得率，使炭化物微晶的ｄ００２值升高和Ｌｃ值减小；而较慢的炭化升温速度有利于制备优质活性炭。缓慢炭化、部分氧化可以在一定程度上控制炭化路径，使炭化向生成取向性差、难石墨化、各向同性、呒定形炭多的炭化物的方向进行；并讨论了它们控制炭化的作用机理。以此为指导，     

热致液晶共聚酯对聚丙烯结晶的诱导作用

用差示扫描量热法和光学解偏振法研究了热致液晶性芳香共聚酯与聚丙烯共混物的等温和非多温结晶行为.结果表明,这一热致液晶聚合物对聚丙烯结晶有诱导成核和加速作用.当共聚酯含量在2-5％之间时,聚丙烯的结晶速率最快.偏光显微镜的观察揭示出在聚丙烯熔体中原位形成的液晶聚合物微纤诱导了聚丙烯横穿晶的形成.     

A new route to semirigid poly(amide-ester)s with ordered structure

Four novel semirigid poly(amide-ester)s having the same ordered amide-amide-ester-ester (-AAEE-) and the same or the different phenyl structure were synthesized from the various combination of active acylamide of benzotriazole (HBT) such as 1,1′-(isophthaloyl)bisbenzotriazole (IPBBT) and 1,1′-(terephthaloyl)bisbenzotriazole (PBBT) with diols such as N,N'-bis(2-hydroxyethyl)isophthamide (HEIPA) and N,N'-bis(2-hydroxyethyl)terephthamide (HEPTA) which prepared from the selective N-acylation of IPBBT or PBBT with aminoethanol in excellent yield at room temperature. Before the preparation of diol monomers, a model reaction of selective N-acylation was also completed from active monoacylamide of benzotriazole, 1-benzoylbenzotriazole with aminoethanol. The ordered structure of poly(amideester)s were characterized by infrared (IR) and NMR spectra. On the bases of different reactivity between selective N-acylation and O-acylation of active acylamide of benzotriazole, poly(amide-ester)s having the ordered AAEE and the same phenyl structure were also readily synthesized from the IPBBT or PBBT with aminoethanol under mild conditions by one-bath process.