A novel approach to synthesize dichlorobenzonitriles by selective ammoxidation

Research on Chemical Intermediates - Dichlorobenzonitriles are important organic intermediates for the production of many fine chemicals and are produced most economically and environment-friendly...     

Ni基乙烷脱氢催化剂的性能及其改进

过渡金属Ni是地球上储量丰富的金属元素, 在加氢脱硫、重整制氢等催化领域应用非常广泛, 但是关于Ni基催化剂在烷烃脱氢方面的研究较少; 因此, 本工作采用不同的方法, 制备了三种结构的Ni基负载催化剂, 即尖晶石分解型、浸渍型和钙钛矿析出型, 并在700 ℃、C₂H₆-N₂气氛中和50 mL•min^-1气体流速下, 探索了它们的乙烷脱氢性能. 结果表明: 尖晶石分解型催化剂Ni_1-xCu_xCr₂O₄还原后在Cr₂O₃表面形成Ni-Cu合金颗粒, 能有效钝化Ni的C—C键断裂活性, 提高乙烯的选择性. Ni含量过高时, Ni不能有效地分散而形成大的金属团簇, 造成乙烷过度裂解, 乙烯选择性较低. 浸渍负载型催化剂Ni_xM_y/Al₂O₃ (M为Cu或Ag) 比表面积大, 表面活性位点分散, 但活性金属与载体结合力弱, 在高温下不稳定; Cu或Ag与Ni形成合金, 可有效提高乙烯选择性, Ag较Cu的效果更佳. 钙钛矿析出型催化剂LaCr_1-xNi_xO₃(LCNi-100x)在还原气氛中析出均匀细小的Ni颗粒, 其与基体结合力强, 抗积碳性能和稳定性较高; 含15% Ni的LCNi-15还原后(R-LCNi-15)表现出最好的催化性能, 乙烯产率最高(24%), 同时具有较好的抗积碳性能和稳定性以及氧化再生性.     

Simple and green synthesis of calcium alginate/hydroxyapatite hybrid material without high temperature treatment and its flame retardancy

Cellulose - Aiming to improve the thermal stability and flame retardant properties of calcium alginate, calcium alginate (CaAlg)/hydroxyapatite (HAP) hybrid material was synthesized in situ by the...     

A Mesoionic Diselenolene Anion and the Corresponding Radical Dianion

Dichalcogenolenes are archetypal redox non-innocent ligands with numerous applications. Herein, a diselenolene ligand with fundamentally different electronic properties is described. A mesoionic diselenolene was prepared by selenation of a C2-protected imidazolium salt. This ligand is diamagnetic, which is in contrast to the paramagnetic nature of standard dichalcogenolene monoanions. The new ligand is also redox-active, as demonstrated by isolation of a stable diselenolene radical dianion. The unique electronic properties of the new ligand give rise to unusual coordination chemistry. Thus, preparation of a hexacoordinate aluminum tris(diselenolene) complex and a Lewis acidic aluminate complex with two ligand-centered unpaired electrons was achieved.     

Research Progress of Regulation of Driving Forces in Short Peptide Supramolecular Self-Assembly北大核心CSCD

Some short peptides can spontaneously self-assemble into various nanostructures via the synergistic driving forces of non-covalent interactions. These non-covalent interactions,including electrostatic interaction,hydrogen bonding,aromatic interactions and other non-covalent interactions,are usually highly coupled together. Through rational sequence design and proper modification of short peptide molecules,the driving forces could be regulated purposively,and the nanostructures and morphologies of the self-assemblies could be controlled accordingly,and thus so as to achieve the fabrication of peptide-based supramolecular biomaterials and develop their functions. In this paper,the effects of hydrogen bonding,π-π stacking, electrostatic interaction,hydrophobic interaction,metal ion coordination and chiral center on the self-assembly behavior of peptide self-assembly have been reviewed. The driving force regulation strategies, including sequence design,pH and concentration adjustment and metal ion coordination,and the resulted nanostructures have also been discussed. We also make the outlooks on the development of peptide-based supramolecular biomaterials with specific functions in biomedicines and biocatalysis. © 2022, Science Press (China). All rights reserved.     

Near-infrared Responsive Photoelectrochemical Biosensors

Near-infrared (NIR) light-driven photoelectrochemical (PEC) sensing is a highly promising analytical technique, especially for in situ bioanalysis, due to the deep penetration capability and minimal invasiveness of NIR light. In this mini review, we provide a brief overview of recently developed NIR PEC sensors, focusing on NIR light-responsive materials and the representative applications of this type of PEC sensor. Future perspectives for NIR PEC sensors are also described.     

New Insights on Potentiometric Immunosensor at Carbon Fiber Microelectrode for Alpha-Fetoprotein in Hepatocellular Carcinoma

Herein, we investigated the analytical features of potentiometric immunosensors for detection of alpha-fetoprotein (AFP) in hepatocellular carcinoma at different electrodes, such as carbon fiber microelectrode (CFME) and carbon-disk electrode (CDE), respectively. To construct such an immunosensor, anti-AFP capture antibodies were first conjugated covalently onto the activated electrodes through typical carbodiimide coupling. Thereafter, one-step immunoreaction protocol was successfully introduced to develop a new potentiometric immunoassay upon addition of AFP. Accompanying the antigen-antibody reaction, the surface charges of the modified electrodes were changed for the readout of electric potential. Results indicated that the linear range of CDE-based immunosensor was 0.1–100 ng mL⁻¹ AFP, whereas the assay sensitivity by using CFME could be further increased to 3.2 pg mL⁻¹ with the linear range from 0.01 to 500 ng mL⁻¹ AFP. Meanwhile, CFME-based immunosensor showed high sensitivity, good reproducibility and specificity, and could be utilized for the analysis of human serum specimens with consistent results relative to commercialized ELISA kit.     

Nonenzymatic Electrochemical Sensor for Wearable Interstitial Fluid Glucose Monitoring

We report on a nonenzymatic electrochemical sensor for wearable glucose monitoring in interstitial fluid. The sensor exhibited acceptable selectivity and reliability for continuous glucose detection for up to 30 days. The sensor tip is coated with polyurethane, and the biocompatibility of the tip is investigated by tissue staining. A fully integrated wearable glucose monitoring system is developed with a wireless connection with a smartphone. The test results are in agreement with reference methods. So, we believe the sensor is promising for the development of a continuous glucose monitoring system and diabetes management.     

Revealing the Reaction and Fading Mechanism of FeSe2 Cathodes for Rechargeable Magnesium Batteries

Rechargeable Mg batteries (RMBs) are advantageous large-scale energy-storage devices because of the high abundance and high safety, but exploring high-performance cathodes remains the largest difficulty for their development. Compared with oxides and sulfides, selenides show better Mg-storage performance because the weaker interaction with the Mg²⁺ cation favors fast kinetics. Herein, nanorod-like FeSe₂ was synthesized and investigated as a cathode for RMBs. Compared with microspheres and microparticles, nanorods exhibit higher capacity and better rate capability with a smaller particle size. The FeSe₂ nanorods show a high capacity of 191 mAh g⁻¹ at 50 mA g⁻¹ and a good rate performance of 39 mAh g⁻¹ at 1000 mA g⁻¹. Ex situ characterizations demonstrate the Mg²⁺ intercalation mechanism for FeSe₂, and a slight conversion reaction occurs on the surface of the particles. The capacity fading is mainly because of the dissolution of Fe²⁺, which is caused by the reaction between Fe²⁺ and Cl⁻ of the electrolyte during the charge process on the surface of the particles. The surface of FeSe₂ is mainly selenium after long cycling, which may also dissolve in the electrolyte during cycling. The present work develops a new type of Mg²⁺ intercalation cathode for RMBs. More importantly, the fading mechanism revealed herein has considered the specificity of Mg battery electrolyte and would assist a better understanding of selenide cathodes for RMBs.     

Insight mechanism of nano iron difluoride cathode material for high-energy lithium-ion batteries: a review

Journal of Solid State Electrochemistry - Iron(II) fluoride (FeF2) is a promising candidate as the cathode material for lithium-ion batteries (LIBs) due to its quite high theoretical energy density...