脉冲激光二极管侧面抽运Nd:YAG激光器晶体时变热效应

采用数值计算的方法,对脉冲激光二极管三向侧面抽运固体激光器中,激光晶体的温度场时变分布进行了计算. 分析了三向侧面抽运情况下晶体内光强分布,在此基础上,采用有限元法,以脉冲激光二极管侧面抽运Nd:YAG激光器为例,对单脉冲过程中晶体温度分布及其影响因素进行分析. 结果表明,晶体升温过程受到抽运条件以及散热条件的影响,但是主要受到抽运条件即抽运光强度和光束半径的影响,降温过程受到晶体热物性参数和晶体半径以及散热条件的影响. 当晶体温度达到周期性分布后,由于晶体径向温度梯度的周期性变化,引起通过晶体的平面光波的中心和边缘光线相对光程差也随时间作周期性变化.     

一种估计半导体激光器1/f噪声参数的新方法

对含白噪声的1/f分形信号小波变换系数的方差随尺度变化的关系进行适当的变换,提出了一种基于最小二乘法的估计半导体激光器1/f噪声参数的新方法.实验表明,该方法可以有效地提取出淹没在白噪声中的激光器1/f噪声,而且估计出的噪声信号的功率谱与对比仪器的测量结果有较好的一致性.     

Residual microstructure associated with impact craters in TiB2/2024Al composite

Residual microstructures associated with hypervelocity impact craters in 55 vol.% TiB(2)/2024Al composite were investigated by transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). TiB(2)-Al interface, TiB(2) particles and Al matrix before and after hypervelocity impact were compared to discuss the effect of hypervelocity impact. A new Al(x)O(1-x) phase with the fcc structure and the crystal parameter of 0.69 nm was formed at TiB(2)-Al interface. Stacking fault with width of 10-20 nm was formed along the (001) plane of TiB(2) particle. Formation of nanograins (≈ 100 nm) was observed within Al matrix, moreover, lamellar S' phase was transformed into lenticular or spherical S phase after hypervelocity impact.     

CMOS电路总剂量效应最劣偏置甄别

采用电路分析和解析建模方法研究了CMOS电路中甄别总剂量效应最劣辐照与测试偏置的问题。通过引入小规模模拟电路和数字电路的例子进行具体分析,获取了不同电路的最劣偏置情况。对于数字电路,引入了敏感因子的概念用于定量计算不同辐照与测试偏置组合下电路的总剂量效应敏感程度。利用实测数据或电路仿真结果对甄别结果进行了一一验证,得到相一致的结论,证明了该研究思路的正确性。     

The formation of different structures in the interaction between a single femtosecond laser pulse and a thin Au film

The interactions between femtosecond (fs) laser pulses and a thin Au film deposited on a silica glass substrate were systematically investigated based on experimental data. Different structures, including microholes, nanoholes, and nanobumps, are obtained when pulses with different energies are incident on the surface of a gold film. The experimental results are discussed according to specific experimental parameters. Two physical models were constructed in order to explain the experimental results. The formation of nanoholes in a silica substrate is attributed to etching by higher order harmonic generations (HHG) when the femtosecond laser pulse interacts with the generated plasma layer, while the formation of nanobumps on the surface of an Au film is attributed to the elastic and plastic characteristics of the metal film under laser pulse irradiation.     

太阳能电池陷光结构辐射特性研究

本文分析了不同微结构、电池厚度对太阳能电池光损失的影响,提出了一种新的电池陷光结构。运用时域有限差分法(FDTD)仿真了该类太阳能电池陷光结构中光传输过程,获得了不同波源入射下陷光结构电池的储能特性和光捕获特性,优化设计了最佳陷光结构并分析了其光捕获性能。     

基于高频雷达多普勒谱预测风向的一种新方法

通过高频雷达一阶多普勒谱与海上风向的关系, 提出了一种基于神经网络和多波束采样法相结合预测海面风向的新方法. 在神经网络不同输入、输出参数情况下对扩展因子为奇数时的仿真数据进行了风向预测, 并在扩展因子为偶数时结合多波束采样法进行风向预测, 消除了风向的模糊性. 通过预测数据和仿真数据对比, 发现两者符合较好. 从神经网络和多波束采样法相结合的预测结果中可以看出, 风向的误差大约为4°—6°, 风向扩展因子的平均误差为0.26, 为预测海面风场的研究提供一种新的思路和方法.     

应用于ICF实验的软X射线平面镜反射率

在北京同步辐射装置上,通过对应用于惯性约束聚变（ICF）实验的平面镜反射率的进一步研究,提高了辐射温度的测量精度。进行了对软X射线平面镜反射率的测量、反射镜的清洗、反射率的模拟计算,证明影响反射率变化的主要因素是平面镜的安装角度和沾污。实验结果表明:平面镜的沾污主要来源于ICF实验中的油沾污,采用射频辉光放电清洗非常有效。     

PbS quantum dot fiber amplifier based on a tapered SMF fiber

A PbS quantum dot coated (QD-coated) tapered fiber amplifier with a broad bandwidth is theoretically demonstrated. The QD layer is coated on the surface of a tapered fiber and is excited by the evanescent wave of a pump. An optical gain of 10.5 dB, with a 160-nm broad bandwidth of at 1530-nm center wavelength, is achieved. The gain efficiency is over 4 dB/cm. This QD-tapered fiber amplifier has a concentration control of the QDs, a lower insertion loss, and shows good suppression of amplified spontaneous emission (ASE), while its structure is also quite simple. Therefore, the proposed fiber amplifier has great potential in fiber-optic communication systems.