基于动态流量矩阵的网络链路权值调整方法

对基于动态流量矩阵的流量均衡问题进行建模,以最小化最大链路利用率为目标分别建立了期望值模型和机会约束模型,并且采用基于流分析的方法计算链路的权值增量,使部分流不再经过利用率最大的链路.仿真实验结果表明:无论是针对期望值模型还是机会约束模型,在已知动态流量矩阵统计特性的情况下,基于流分析的链路权值调整方法都能在只改变利用率最大的链路的权值时,依然保证网络失效后流量基本均衡.     

多段线缆驱动连续型空间机械臂建模与控制

该文针对一类带有弹性杆的新型多段线缆驱动连续型空间机械臂的建模与控制问题开展研究,基于刚体等效建模思想建立了机械臂的几何模型。对每节机械臂进行单元划分,将各单元上的弹性杆等效为轻质连杆。在此基础上,应用欧拉-拉格朗日建模方法,建立了多段线缆驱动连续型空间机械臂动力学模型。针对系统中存在的参数不确定性与外部时变干扰,基于Lyapunov稳定性理论,提出了一种基于非奇异终端滑模有限时间控制(NTSMFC)的连续型机械臂控制方法。仿真结果表明：与比例-微分(PD)控制器相比,NTSMFC能在有限时间内快速跟踪期望姿态角,PD控制器的姿态跟踪快速性较低;NTSMFC姿态角稳态误差为±0.002 rad, PD控制器姿态角稳态误差为±0.01 rad。     

Current Understanding toward Isonitrile Group Biosynthesis and Mechanism

Isonitrile group has been identified in many natural products.Due to the broad reactivity of N≡C triple bond,these natural products have valuable pharmaceutical potentials.This review summarizes the current biosynthetic pathways and the corresponding enzymes that are responsible for isonitrile-containing natural product generation.Based on the strategies utilized,two fundamentally distinctive approaches are discussed.In addition,recent progress in elucidating isonitrile group formation mechanisms is also presented.     

钛硅沸石中的一种非活性钛物种

Synthesis of the titanium silicalite TS-1 was first reported by Taramasso et al[1]in 1983. TS-1 has received considerable interest during the last decade because of its unique catalytic properties in oxidation reactions involving H2O2 as the oxidant. It is accepted that the extraframework Ti species in TS-1 favor the decomposition of H2O2and should be avoided. But in the present study, it was observed that there was a kind of Ti species inactive in both the oxidation reaction and the decomposition of H2O2.     

微量元素与儿童健康

论述了常见微量元素与儿童健康的关系，并简要地介绍了部分常见微量元素对人体的作用。提出了一些微量元素缺少或过量的药物治疗方法。     

Freeze-drying for the stabilisation of shellfish toxins in mussel tissue (<Emphasis Type="Italic">Mytilus edulis</Emphasis>) reference materials

Two samples of mussels (Mytilus edulis) were collected from the southwest of Ireland. One sample contained domoic acid, the other sample contained okadaic acid, dinophysistoxin-2 and azaspiracid-1, -2 and -3. Wet and freeze-dried reference materials were prepared from each of the two samples to test for differences in homogeneity, stability and extractability of the analytes in either condition. Wet materials were homogenised, aliquoted and hermetically sealed under argon and subsequently frozen at −80 °C. Dry materials were similarly homogenised but frozen in flat cakes prior to freeze-drying. After grinding, sieving and further homogenisation, the resulting powder was aliquoted and hermetically sealed. Domoic acid materials were characterised using HPLC–UV, while LC–MS was used for the determination of lipophilic toxins. The extractabilities of all phycotoxins studied were comparable for wet and freeze-dried materials once a sonication step had been carried out for reconstitution of the freeze-dried materials prior to extraction. Homogeneity was assessed through replicate analysis of the phycotoxins (n = 10), and was found to be similar for wet and freeze-dried materials, for both hydrophilic and lipophilic toxins. Water contents were determined for both wet and freeze-dried materials, and particle size was determined for the freeze-dried materials. Stability was evaluated isochronously over eight months at four temperatures (−20, +4, +20 and +40 °C). The freeze-dried material containing domoic acid was stable over the whole duration at all temperatures, while in the wet material domoic acid degraded to some extent at all temperatures except −20 °C. In freeze-dried and wet materials containing lipophilic toxins, okadaic acid, dinophysistoxin-2, azaspiracid-1 and azaspiracid-2 were stable over the whole duration at all conditions, while concentrations of azaspiracid-3 changed significantly in both materials at some storage temperatures. Figure Aliquots of freeze-dried and wet mussel tissue reference materials containing the various shellfish toxins examined in the study     

Monitoring of PAHs in air by collection on XAD-2 adsorbent then microwave-assisted thermal desorption coupled with headspace solid-phase microextraction and gas chromatography with mass spectrometric detection

Microwave-assisted thermal desorption (MAD) coupled to headspace solid-phase microextraction (HS-SPME) has been studied for in-situ, one-step, sample preparation for PAHs collected on XAD-2 adsorbent, before gas chromatography with mass spectrometric detection. The PAHs on XAD-2 were desorbed into the extraction solution, evaporated into the headspace by use of microwave irradiation, and absorbed directly on a solid-phase microextraction fiber in the headspace. After desorption from the SPME fiber in the hot GC injection port, PAHs were analyzed by GC–MS. Conditions affecting extraction efficiency, for example extraction solution, addition of salt, stirring speed, SPME fiber coating, sampling temperature, microwave power and irradiation time, and desorption conditions were investigated. Experimental results indicated that extraction of 275 mg XAD-2, containing 10–200 ng PAHs, with 10-mL ethylene glycol–1 mol L⁻¹ NaCl solution, 7:3, by irradiation with 120 W for 40 min (the same as the extraction time), and collection with a PDMS–DVB fiber at 35 °C, resulted in the best extraction efficiency. Recovery was more than 80% and RSD was less than 14%. Optimum desorption was achieved by heating at 290 °C for 5 min. Detection limits varied from 0.02 to 1.0 ng for different PAHs. A real sample was obtained by using XAD-2 to collect smoke from indoor burning of joss sticks. The amounts of PAHs measured varied from 0.795 to 2.53 ng. The method is a simple and rapid procedure for determination of PAHs on XAD-2 absorbent, and is free from toxic organic solvents.     

壬基酚聚氧乙烯醚型Gemini季铵盐表面活性剂的合成 及其表面性质的研究

合成了系列壬基酚聚氧乙烯醚型Gemini季铵盐表面活性剂(GNPQA), 用核磁、红外和元素分析对它们的结构进行了表征, 考察了反应条件对转化率的影响, 并用表面张力法和稳态荧光探针法对GNPQA的表面性能及胶束聚集数(N)进行了研究. 结果表明, 较优的反应条件: 反应时间为12 h, 反应温度为70 ℃, 反应原料摩尔比为n(双聚壬基酚聚氧乙烯醚)∶n(三乙胺)∶n(环氧氯丙烷)＝1∶1∶1; GNPQA的临界胶束浓度(CMC)值较相应的单体壬基酚聚氧乙烯醚型季铵盐表面活性剂(NPQA)降低了1～2个数量级, 显示了较高的表面活性; 当GNPQA溶液浓度为5～9倍CMC时, N值随浓度增大而线性增大; 随着氧乙烯(EO)单元数的增长, GNPQA的CMC和N值均逐渐减小; 结合GNPQA的表面性能参数和N值的变化规律, 探讨了这类表面活性剂表面及胶束聚集体的结构形态.     

3-甲基环状乙撑磷酸二酯醇解的反应途径的理论研究

采用密度泛函理论和MP2方法研究了3-甲基环状乙撑磷酸二酯(MEP)与甲醇的反应途径:(Ⅰ)CH3O-+MEP;(Ⅱ)CH3OH+MEP;(Ⅲ)CH3O-+HMEP(MEP的质子化形式);(Ⅳ)CH3OH+HMEP.在B3LYP/6-31++G(d,p)水平上优化了四条反应途径的反应物、中间体、过渡态及产物的几何构型,并在同水平上进行了自然电荷分析,然后在MP2/6-311++G(3df,2p)水平上计算了各驻点的单点能.采用极化连续介质模型(PCM)研究了各途径在苯、甲醇和水溶液中的溶剂化效应.计算结果表明,溶剂效应使途径(Ⅰ)的自由能垒降低,而使途径(Ⅱ)和(Ⅳ)的决速步骤的自由能垒升高.在气相和苯溶剂中途径(Ⅳ)是反应的优势途径,在甲醇和水溶剂中途径(Ⅰ)则成为最优.研究结果进一步表明实验条件下途径(Ⅱ)与(Ⅳ)对总醇解反应的贡献相当.