计算全息图产生的锥面波在激光准直中的应用

本文提出了用计算全息图产生锥面波的方法.将全息图置于激光光路中,它的衍射图样中心在空间形成了一条准直线.文中对锥面波的传播、准直精度及准直距离作了理论分析,给出了实验结果.     

Multiple positive solutions for one-dimensional p-Laplacian boundary value problems

By means of the Leggett-Williams fixed-point theorem, criteria are developed for the existence of at least three positive solutions to the one-dimensional p-Laplacian boundary value problem, ((y′))′ + g(t)f(t,y) = 0, y(0) - B₀(y′(0)) = 0, y(1) + B₁(y′(1)) = 0, where (v) |v|^p−2v, p > 1.     

拟南芥胚的不同区域对MeV离子辐照的响应

利用不同能量的质子在大气环境中辐照拟南芥的含水种子，能量从1.1MeV到6.5MeV.根据模拟计算结果，相应能量的离子对种子的损伤区域分别为胚的浅层、胚的一半和整个胚.本实验中，具有较高能量的质子可以完全均匀地作用于拟南芥生长、发育及遗传密切相关的胚茎端分生组织，而能量较低的质子则不能直接作用于茎端分生组织.实验所用质子注量范围为4×10⁹ions/cm²—1×10¹⁴ions/cm².实验结果显示，虽然拟南芥种子的发芽率和幼苗存活率随离子注量增加都呈现下降的趋势，但对应于不同的胚损伤区域，即在不同的入射质子能量条件下，注量曲线具有各自的特征.实验结果显示，拟南芥种子中除了胚茎端分生组织作为对离子辐照敏感的辐射主靶外，茎端分生组织之外的胚区域可能作为离子辐射次靶，影响到最终的辐射生物学效应. 关键词： 离子辐照 拟南芥 胚区域 生物效应     

Darboux transformation and solitons of Yang-Mills-Higgs equations in R2,1

The Darboux transformations for soliton equations are applied to the Yang-Mills-Higgs equations.New solutions can be obtained from a known one via universal and purely algebraic formulas. SU(N) soliton solutions are constructed with explicit formulas. The interaction of solitons is described by the splitting theorem:each p-soliton is splitting into p single solitons asymptotically as t →±∞.     

TP801控制凝固点降低法测定分子量

介绍用ＴＰ＿（８０１）微机控制凝固点降低法测定分子量的有关原理和技术，与传统的用贝克曼温度计测△Ｔ方法相比，扩大了测量范围，提高了精密度，工作条件得到改善．     

COMPLETE EXTREMAL SURFACES OF MIXED TYPE IN 3-DIMENSIONAL MINKOWSKI SPACE

ＣＯＭＰＬＥＴＥＥＸＴＲＥＭＡＬＳＵＲＦＡＣＥＳＯＦＭＩＸＥＤＴＹＰＥＩＮ３－ＤＩＭＥＮＳＩＯＮＡＬＭＩＮＫＯＷＳＫＩＳＰＡＣＥ￥ＧＵＣＨＡＯＨＡＯ（ＩｎｓｔｉｔｕｔｅｏｆＭａｔｈｅｍａｔｉｃｓ，ＦｕｄａｎＵｎｉｖｅｒｓｉｔｙ，Ｓｈａｎｇｈａｉ２００...     

浅谈高等医学院校物理实验室管理与建设

确立实验技术人员的地位和作用,加强对其综合素质进行培养;努力改善实验教学环境和条件,建立完善的制度,是高等医学院校物理实验室建设管理的重要环节.本文结合我校实际谈一些体会.     

溅射功率对多层膜质量的影响

用磁控溅射技术制备薄膜，用X射线衍射研究在基片和靶间距离固定的情况下不同的溅射功率对薄膜结构的影响。结果表明：过低的溅射功率下淀积的薄膜有畸变的X射线衍射特征峰，特征峰强度小，半峰全宽大。而比较高溅射功率得到的薄膜有比较尖锐的X射线衍射特征峰，强度高和半峰全宽非常窄。研究表明，X射线衍射特征峰强度小和半峰全宽大的薄膜结构疏松，而强度高和半峰全宽非常窄的薄膜结构致密。     

Titanium carbonitride films on cemented carbide cutting tool prepared by pulsed high energy density plasma

Hard films prepared by pulsed high energy density plasma (PHEDP) are characterized by high film/substrate adhesive strength, and high wear resistance. Titanium carbonitride (TiCN) films were deposited onto YG11C (ISO G20) cemented carbide cutting tool substrates by PHEDP at room temperature. XRD, XPS, SEM, AES, etc. were adopted to analyze the phases (elements) composition, microstructure and the interface of the films, respectively. The results show that, the uniform dense films are composed of grains ranging from 70 to 90 nm. According to the AES result, there is a broad transition layer between the film and the substrate, due to the ion implantation effect of the PHEDP. The transition layer is favorable for the film/substrate adhesion.