Photothermal deflection measurement of effective gas diffusion coefficient of a porous medium

In this work, an effective gas diffusion coefficient of a porous medium was measured using photothermal deflection (PD) technique. An in-house made Loschmidt diffusion cell with a photothermal-deflection probe were employed to measure the effective gas diffusion coefficient of a gas diffusion layer (GDL) with a porosity ε ≈ 0.7. The concentration evolutions of CO₂ in O₂ with and without the GDL were measured, respectively, using a transverse normal PD technique. The concentration variations were used to deduce the gas diffusion coefficients in the presence and absence of the GDL by solving mass diffusion equations. The effective gas diffusion coefficient of the GDL was calculated from the diffusion coefficients using a model of an equivalent resistance to diffusion and found to be 4.39 × 10^-6 m²s^-1, demonstrating that PD technique can be employed to determine the effective gas diffusion coefficient of a porous medium.     

Dynamic vertical interaction of a foundation–soil system generated by seismic waves

Based on Biot's dynamic poroelastic theory, a foundation–soil interaction model is established to investigate the vertical vibrations of a rigid circular foundation on poroelastic soil excited by incident plane waves, including the fast P waves and SV waves. Scattering waves caused by the foundation and fluid–solid coupling due to the pore water in the soil are also considered in the model. The solution of the vertical vibrations of the foundation subjected to seismic waves are obtained by solving two sets of dual integral equations derived from the mixed boundary-value conditions. The different vertical vibrations of foundation rest on elastic and saturated half-space are compared. The influences of incident angle, permeability of soil and foundation mass on the vertical vibrations of the foundation are then discussed. The results show that resonant phenomenon of the foundation is observed at certain excitation frequencies; the effects of the pore water on the foundation vertical vibrations are significant. In addition, significant differences are found when the foundation is excited by P waves and SV waves, respectively.     

Virtual topology design scheme with energy efficiency for IP over elastic optical networks

The rapid growth of the Internet raises the importance of resource planning of Internet protocol（IP） over elastic optical networks（EONs）, which is a challenging task due to more complex and obscure physical constraints of it. Compared with network cost, the power consumption may eventually become the barrier to the expansion of the Internet. We present an energy-efficient virtual topology design（VTD） scheme for IP over EON. We explicitly explain and analyze the mixed integer linear programming model and the heuristic algorithm for this scheme. Numerical results show that the proposed VTD scheme can significantly save power consumption.     

Phase and shape controlling of MnS nanocrystals in the solvothermal process

MnS nanocrystals with different phases and shapes were prepared through solvothermal synthesis. The products were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), UV–vis absorption and photoluminescence (PL) spectra. The solvent and reaction time played an important role in controlling the phase and shape of MnS nanocrystals. The possible mechanism of the shape evolution was investigated, which revealed that the crystal growth along the unique c axis of γ-MnS resulted in the rod-like MnS at the primary period, and the tetrahedral crystal seed of β-MnS with zincblende structure resulted in the interlinking of MnS rods, so the zigzag and three-branched and palm-like MnS appeared; with increasing reactive time the thermodynamically stable spherical α-MnS was favored through the Ostwald ripening process. The PL results showed that the intensity of γ-MnS was much weaker than that of α-MnS, and the trap state emissions of γ-MnS at 470 and 482 nm, respectively, disappeared, which might be ascribed to the difference of the shapes between the sphere and the rod or branch.     

不等缝宽多缝的夫琅禾费衍射及计算机模拟

基于复数法、积分法和矢量法研究不等间距多缝的夫琅禾费衍射的振幅和光强分布.应用Matlab软件进行数值模拟得到衍射图样,分析衍射图样.衍射振幅的推导方法和计算机模拟方法对于研究干涉、衍射等有一定的实际意义和指导意义.     

Exploring classically chaotic potentials with a matter wave quantum probe

We study an experimental setup in which a quantum probe, provided by a quasimonomode guided atom laser, interacts with a static localized attractive potential whose characteristic parameters are tunable. In this system, classical mechanics predicts a transition from regular to chaotic behavior as a result of the coupling between the different degrees of freedom. Our experimental results display a clear signature of this transition. On the basis of extensive numerical simulations, we discuss the quantum versus classical physics predictions in this context. This system opens new possibilities for investigating quantum scattering, provides a new testing ground for classical and quantum chaos, and enables us to revisit the quantum-classical correspondence.     

Dual-core ytterbium fiber amplifier for high-power 1060 nm swept source multichannel optical coherence tomography imaging

A novel (to our knowledge) dual-core ytterbium (Yb(3+)) doped fiber, as an optically pumped amplifier, boosts the output power from a 1060 nm swept source laser beyond 250 mW, while providing a wavelength tuning range of 93 nm, for optical coherence tomography (OCT) imaging. The design of the dual-core Yb-doped fiber amplifier and its multiple wavelength optical pumping scheme to optimize output bandwidth are discussed. Use of the dual-core fiber amplifier showed no appreciable degradation to the coherence length of the seed laser. The signal intensity improvement of this amplifier is demonstrated on a multichannel in vivo OCT imaging system at 1060 nm.     

反应离子刻蚀ZnTe的THz辐射和探测研究

运用电光采样技术揭示了反应离子刻蚀（RIE）ZnTe晶体表面THz辐射的光学整流产生机制， 观察到0.25 ps的THz场分布.通过比较刻蚀前后以及不同刻蚀条件下ZnTe样品在不同激发功 率下的THz辐射强度，发现由于反应离子刻蚀破坏了ZnTe样品表面的有序性，晶体的电光系 数随射频功率的增加而减小.借助于计算不同刻蚀条件下ZnTe晶体的频率响应函数，分析了 随射频功率增加ZnTe晶体响应频谱展宽的现象. 关键词： THz辐射 反应离子刻蚀 ZnTe     

Unambiguous identification of three beta-decaying isomers in 70Cu

Using resonant laser ionization, beta-decay studies, and for the first time mass measurements, three beta-decaying states have been unambiguously identified in 70Cu. A mass excess of -62 976.1(1.6) keV and a half-life of 44.5(2) s for the (6-) ground state have been determined. The level energies of the (3-) isomer at 101.1(3) keV with T(1/2)=33(2) s and the 1+ isomer at 242.4(3) keV with T(1/2)=6.6(2) s are confirmed by high-precision mass measurements. The low-lying levels of 70Cu populated in the decay of 70Ni and in transfer reactions compare well with large-scale shell-model calculations, and the wave functions appear to be dominated by one proton-one neutron configurations outside the closed Z=28 shell and N=40 subshell. This does not apply to the 1+ state at 1980 keV which exhibits a particular feeding and deexcitation pattern not reproduced by the shell-model calculations.     

Improving mechanical properties of a-CNx films by Ti-TiN/CNx gradient multilayer

Amorphous carbon nitride (a-CN_x) films with functional gradient Ti-TiN/CN_x underlayer were deposited by direct current magnetron sputtering. Microstructure and composition of the films were characterized by means of X-ray diffraction (XRD), Raman spectroscopy, atomic force microscope (AFM) and transmission electron microscopy (TEM). Mechanical and tribological properties were investigated by nanoindenter, scratch and ball-on-disk tribometer. The a-CN_x-based films suffer a graphitization process with the increasing deposition temperature, thus the hardness and elastic modulus decrease. With the design of the Ti-TiN/CN_x gradient underlayers, some important advantages of relatively thick CN_x films can be achieved, such as increased hardness, improved adhesion strength, and the wear resistance of the a-CN_x-based films can be also improved significantly.