Poly(phenylene oxide) modified cyanate resin for self‐healing

Self‐healing cyanate ester resins (CE) were developed by adding low molecular weight poly(phenylene oxide) (PPO) resin, yielding a high performance CE/PPO system via a low‐temperature process. The addition of PPO improved the flexural strength and fracture toughness of the CE matrix without sacrificing thermal properties. CE/PPO formulations with 5, 10, and 15 wt.% PPO showed 43%, 65%, and 105% increase in fracture toughness due to a combination of crack deflection, crack pinning, and matrix cavitation around second‐phase particles. When PPO was introduced into the CE, dielectric properties were either unchanged or declined. During thermal treatment to heal damaged CE, liquid PPO flowed into cracks, and during subsequent cooling, solidified to bond the crack surfaces. The self‐healing efficiency for CE with 15 wt.% PPO after heating to 220°C for 1 h exhibited a recovery of 73% in toughness and 81% in microtensile strength. Copyright © 2014 John Wiley & Sons, Ltd.     

Phenylboronate‐diol crosslinked polymer/SWCNT hybrid gels with reversible sol–gel transition

This work demonstrates the successful incorporation of functionalized single‐walled carbon nanotubes (f‐SWCNTs) into the phenylboronate‐diol crosslinked polymer gel to create a hybrid system with reversible sol–gel transition. The phenylboronic acid‐containing and diol‐containing polymers were first separately prepared by the reversible addition–fragmentation chain transfer polymerization. Covalent functionalization of single‐walled carbon nanotubes (SWCNTs) with an azide‐derivatized, diol‐containing polymer was then accomplished by a nitrene addition reaction. Subsequently, the hybrid gels were prepared by crosslinking the mixture of f‐SWCNTs and diol‐containing polymer with the phenylboronic acid‐containing polymer. The hybrid gel has been characterized by scanning electron microscopy (SEM) and rheological analysis. The SEM measurement demonstrated a homogeneous dispersion of f‐SWCNTs within the gel matrices. Rheological experiments also demonstrated that the hybrid gel exhibited storage moduli significantly higher than those of the native gel obtained from the phenylboronic acid‐containing and diol‐containing polymers. The hybrid gel can be switched into their starting polymer (f‐SWCNTs) solutions by adjusting the pH of the system. Moreover, the hybrid gel revealed a self‐healing property that occurred autonomously without any outside intervention. By employing this dynamic character, it is possible to regenerate the used gel, and thus, it has the potential to perform in a range of dynamic or bioresponsive applications Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis,structure, and electrochemical properties of [M(N-MeIm)6]2+ (M = Ni,Co, Cu) associated with [HgCl4]2−

Reaction of Hg(NO₃)₂ with 4 equivalent KI in water afford K₂[HgI₄]. By using K₂[HgI₄] as the precursor, three new heterobimetallic compounds [Ni(N-MeIm)₆][HgI₄] (I), [Co(N-MeIm)₆][HgI₄] (II), and [Cu(N-MeIm)₆][HgI₄] (III) have been characterized by elemental analysis, IR spectra, and the singlecrystal X-ray crystallorgraphy analysis. Three complexes are isomorphous and crystallized in monoclinic symmetry space group P2₁/c. The coordination around each center metal(II) atom is octahedral with six nitrogen atoms of N-MeIm ligand. Each structure contains one tetrahedral [HgI₄]^2? as an anion to balance the charge of the molecular. Thermogravimetry analysis indicates these complexes have the similar departure process and cyclic voltammogram exhibits a significant pair of redox peaks.     

Compatibility of medroxyprogesterone acetate and pharmaceutical excipients through thermal and spectroscopy techniques

Studies of active drug-excipient compatibility represent an important phase in the preformulation stage of the development of all dosage forms. For the development of conjugation estrogens and medroxyprogesterone acetate (MPA) double-layer tablets, techniques of thermal, isothermal stress testing (IST), and molecular vibrational spectroscopy analysis were performed to access the compatibility. Differential scanning calorimetry (DSC) studies were used as an important and complementary tool during preformulation to determine drug-excipient compatibility. On the basis of DSC results, MPA was found to be compatible with polyethylene glycol 6000. However, the results of Raman and IST studies showed that all the excipients defined in the prototype formula were found to be compatible with MPA. Overall, the compatibility of selected excipients with MPA was successfully evaluated using a combination of thermal and IST methods, and the formulations developed using the compatible excipients were found to be stable.     

Pyrolysis of Hailar lignite in an autogenerated steam agent

An in situ pyrolysis process of high moisture content lignite in an autogenerated steam agent was proposed. The aim is to utilize steam autogenerated from lignite moisture as a reactant to produce fuel gas and additional hydrogen. Thermogravimetric analysis revealed that mass loss and maximum mass loss rate increased with the rise of heating rates. The in situ pyrolysis process was performed in a screw kiln reactor to investigate the effects of moisture content and reactor temperature on product yields, gas compositions, and pyrolysis performance. The results demonstrated that inherent moisture in lignite had a significant influence on the product yield. The pyrolysis of L _R (raw lignite with a moisture content of 36.9 %, wet basis) at 900 °C exhibited higher dry yield of 33.67 mL g^?1 and H₂ content of 50.3 vol% than those from the pyrolysis of the predried lignite. It was also shown that increasing reaction temperature led to a rising dry gas yield and H₂ yield. The pyrolysis of L _R showed the maximum dry yield of 33.7 mL g^?1 and H₂ content of 53.2 vol% at 1,000 °C. The LHV of fuel gas ranged from 18.45 to 14.38 MJ Nm^?3 when the reactor temperature increased from 600 to 1,000 °C.     

Comparing study on hydration properties of various cementitious systems

The hydration properties of slag sulfate cement (SSC), slag Portland cement (PSC), and ordinary Portland cement (POC) were compared in this study by determining the compressive strength of pastes, the hydration heat of binders within 72 h, the pore structure, the hydration products, and the hydration degree. The results indicated that main hydration products of PSC paste and POC paste are calcium hydroxide and C–S–H gel, while those of SSC paste are ettringite and C–S–H gel from the analyses of XRD, TG–DTA, and SEM. At the early curing age, the compressive strength depends on the clinker content in the cementitious system, while at the late curing age, which is related to the potential reactivity of slag. From hydration heat analysis, the cumulative hydration heat of PSC is lower than that of POC, but higher than that of SSC. Slag can limit chemical reaction and the delayed coagulation of gypsum, which also plays a role in the early hydration. So SSC shows the lowest heat release and slag can’t be simulated without a suitable alkaline solution. Based on MIP analysis, the porosity of POC paste is the smallest while the average pore size is the biggest. At the age of 90 days, the compressive strength of SSC can get higher development because of its relative smaller pore size than that of PSC and POC paste.     

Fast-scan chip-calorimeter measurement on the melting behaviors of melt-crystallized syndiotactic polystyrene

We employed fast-scan chip-calorimeter (FSC) measurement (Flash DSC1) to study the melting of syndiotactic polystyrene after melt-crystallized at various cooling rates as well as after isothermally crystallized at various high temperatures. We attributed the observed double melting peak to a melting-recrystallization process of beta-form crystals upon heating, as evidenced by their variations with different cooling and heating rates. Our experiments demonstrated the advantages of FSC techniques in the investigation of crystallization and melting behaviors of polymer materials.     

The calcined zeolitic imidazolate framework-8 (ZIF-8) under different conditions as electrode for supercapacitor applications

Zeolitic imidazolate framework-8 (ZIF-8) is synthesized by typical solvothermal method and subsequently calcined under air and nitrogen atmosphere, respectively. The carbon in the calcined ZIF-8 under nitrogen atmosphere was from the carbonization of the guest molecules, without adding any other carbon sources. The samples are characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and electrochemical analyzer system. When the ZIF-8 is used as electrode materials for a supercapacitor in 6 M KOH electrolyte, it displays a pseudocapacitive behavior. The untreated ZIF-8 and calcined ZIF-8 under air and nitrogen atmosphere electrodes exhibit a specific capacitance of 96, 156, and 185 F g^?1, respectively, at a scan rate of 5 mV s^?1 and good stability over 1,500 cycles. These results indicate that the ZIF-8 is a promising material for supercapacitors.     

Mechanistic Insights into the Interface‐Directed Transformation of Thiols into Disulfides and Molecular Hydrogen by Visible‐Light Irradiation of Quantum Dots

Quantum dots (QDs) offer new and versatile ways to harvest light energy. However, there are few examples involving the utilization of QDs in organic synthesis. Visible‐light irradiation of CdSe QDs was found to result in virtually quantitative coupling of a variety of thiols to give disulfides and H₂ without the need for sacrificial reagents or external oxidants. The addition of small amounts of nickel(II) salts dramatically improved the efficiency and conversion through facilitating the formation of hydrogen atoms, thereby leading to faster regeneration of the ground‐state QDs. Mechanistic studies reveal that the coupling reaction occurs on the QD surfaces rather than in solution and offer a blueprint for how these QDs may be used in other photocatalytic applications. Because no sacrificial agent or oxidant is necessary and the catalyst is reusable, this method may be useful for the formation of disulfide bonds in proteins as well as in other systems sensitive to the presence of oxidants.     

Clickable Periodic Mesoporous Organosilicas: Synthesis,Click Reactions,and Adsorption of Antibiotics

Pharmaceutical antibiotics are not easily removed from water by conventional water‐treatment technologies and have been recognized as new emerging pollutants. Herein, we report the synthesis of clickable azido periodic mesoporous organosilicas (PMOs) and their use as adsorbents for the adsorption of antibiotics. Ethane‐bridged PMOs, functionalized with azido groups at different densities, were synthesized by the co‐condensation of 1,2‐bis(trimethoxysilyl)ethane (BTME) and 3‐azidopropyltrimethoxysilane (AzPTMS), in the presence of nonionic‐surfactant triblock‐copolymer P123, in an acidic medium. Four different alkynes were conjugated to azide‐terminated PMOs by means of an efficient click reaction. The clicked PMOs showed improved adsorption capacity (241 μg g^?1) for antibiotics (ciprofloxacin hydrochloride) compared with azido‐functionalized PMOs because of the enhanced π–π stacking interactions. These results indicate that click reactions can introduce multifunctional groups onto PMOs, thus demonstrating the great potential of PMOs for environmental applications.