Single‐Crystalline and Near‐Monodispersed NaMF3 (M=Mn,Co, Ni,Mg) and LiMAlF6 (M=Ca,Sr) Nanocrystals from Cothermolysis of Multiple Trifluoroacetates in Solution

We report the synthesis of single‐crystalline and near‐monodispersed NaMF₃ (M=Mn, Co, Ni, Mg), LiMAlF₆ (M=Ca, Sr), and NaMgF₃:Yb,Er nanocrystals (quasisquare nanoplates, nanorods, and nanopolygons) by the cothermolysis of multiple trifluoroacetates in hot combined organic solvents (oleic acid, oleylamine, and 1‐octadecene). The nanocrystals were characterized by XRD, TEM, superconductive quantum interference device (SQUID), and upconversion luminescence spectroscopy. By regulating the polarity of the dispersant, the NaMF₃ (M=Mn, Co, Ni) nanoplates were partially aligned to form nanoarrays on copper TEM grids. The sizes of the NaMF₃ nanocrystals were easily tuned by the use of proper synthetic conditions such as reaction temperature and time and solvent composition. On the basis of a series of experiments in which the reaction conditions were varied, together with GC–MS and FTIR analysis, the reaction pathways for the formation of these nanocrystals from trifluoroacetate precursors were proposed. The magnetic measurements showed that the differently sized NaMnF₃ square plates displayed interesting weak ferromagnetic behavior on the nanometer scale. The strong red upconversion luminescence emitted from the NaMgF₃:Yb,Er nanorods under 980‐nm near‐IR laser excitation suggests that NaMgF₃ may be a good candidate host material for red upconversion luminescence.     

硝酸钬水合物热分解及配位性质的研究

文献报道了Ho(NO_3)_3·5H_2O和Ho(NO_3)_3·(?)H_2O的热分解行为,但Ho(NO_3)_3·5H_2O脱水机理不清,Ho(NO_3)_3·4H_2O按文献[1]不能制出。六水、三水合物的热分解及与DMF的配位作用未见报道。     

Fine structures of zeolite-Linde-L (LTL): surface structures, growth unit and defects

High-resolution electron microscopy (HREM) has been used to image the surface structure of nano- and micrometer-sized synthetic crystals of zeolite-Linde-L (LTL). Columnar holes and rotational, nano-sized, wheel-like defects were observed within the crystals, where the hole has a minimum size equal to that of the rotational defect. Predictions of surface structure from atomistic computer simulation concur with the observations from HREM and provide insight into the crystal growth mechanism of perfect and defective LTL. Analysis of the energetics of the formation of rotational defect structures reveals that the driving force for defect creation is thermodynamic and furthermore, the rotational defects could be created in high concentrations. Formation of a columnar hole is found to be slightly energetically unfavourable and therefore we speculate that the incidence of both rotational and nano-sized vacancy defects is strongly dependent on kinetic factors and reaction conditions. The morphology of nano- and microcrystalline LTL is contradistinct and we use insights from simulation to propose an explanation of the disparity in crystal shape.     

A study on postsplenectomy changes of serum tuftsin level using a radioimmunoassay protocol

In this article, postsplenectomy changes of serum tuftsin level were studied on both human subjects and rabbits by using a self-established radioimmunoassay protocol. Antituftsin antibodies were raised in rabbits and roosters.¹²⁵I-tuftsin was prepared through an Iodogen method. The characteristics of the RIA were satisfactory with a detecting range of 0.5–100 ug/ml and the lowest detection limit of 400ng/ml. Serum tuftsin levels of splenectomized subjects were measured and compared with control groups. The serum tuftsin level from 30 postsplenectomy human beings was 406±179 ng/ml ( ± s) while that from a control group of 40 healthy blood donors was 557±256 ng/ml; the serum tuftsin level of 10 postsplenectomy rabbits was found to be 206±75 ng/ml while that of a control group of 10 normal rabbits was 318±96 ng/ml. The results showed that serum tuftsin level decreased markedly after splenectomy.     

微分倒数示波计时电位法的研究—定量测试及滴定分析

首次利用微分倒数示波图定量测试微量金属离子并滴定分析药物，结果满意。     

Two salts of 5‐sulfosalicylic acid and 3‐aminopyridine

5‐Sulfosalicylic acid (5‐SSA) and 3‐aminopyridine (3‐APy) crystallize in the same solvent system, resulting in two kinds of 1:1 proton‐transfer organic adduct, namely 3‐aminopyridinium 3‐carboxy‐4‐hydroxybenzenesulfonate monohydrate, C₅H₇N₂⁺·C₇H₅O₆S⁻·H₂O or 3‐APy·5‐SSA·H₂O, (I), and the anhydrous adduct, C₅H₇N₂⁺·C₇H₅O₆S⁻ or 3‐APy·5‐SSA, (II). Both compounds have extensively hydrogen‐bonded three‐dimensional layered polymer structures, with interlayer homo‐ and heterogeneous π–π interactions in (I) and (II), respectively.     

硫氰酸甲基三烷基季铵盐萃取Co（Ⅱ）的动力学

有关Co(Ⅱ)、Ni(Ⅱ)萃取分离的研究一直受到人们的重视。Preston报导了硫氰酸季铵盐(Q~ SCN-)萃取Co(Ⅱ)、Ni(Ⅱ)的平衡研究,认为Co(Ⅱ)的萃合物组成为Q_2Co(SCN)_4.本文用上升液滴法技术考察了Co(Ⅱ)/0.10mol·L~(-1)SO_4~(2-)/QSCN-煤油体系在298±1K条件下萃取速率R与CoSO_4、SO_4~(2-)和QSCN浓度的关系,确定了正向初始萃取速率方程,拟定了速控步骤。     

Enhancement of Raman scattering for an atom or molecule near a metal nanocylinder: quantum theory of spontaneous emission and coupling to surface plasmon modes

An analytic expression for the electromagnetic enhancement of the spontaneous emission rate and Raman scattering cross-section for an excited atom or molecule in close proximity to a metal nanocylinder has been derived by quantum theory. Coupling of the atomic or molecular optical radiation into the TM0 surface plasmon mode of the nanocylinder results in reradiation by the cylinder, a process that is most efficient when the incident radiation is linearly polarized, with the electric field oriented parallel to the axis of the nanocylinder. For a silver cylinder having a radius and length of 5 and 20 nm, respectively, the enhancement in the spontaneous emission rate is >10(7) for variant Planck's over 2pi omega0 approximately 2.4 eV (lambda=514 nm), which corresponds to an increase of approximately 10(14) in the Raman scattering cross section. This result, as well as the prediction that the atomic dipole generates broadband, femtosecond pulses, are in qualitative agreement with previously reported experiments involving metal nanoparticle aggregates. The theoretical results described here are expected to be of value in guiding future nonlinear optical experiments in which carbon nanotubes or metal nanowires with controllable physical and electrical characteristics are patterned onto a substrate and coupled with emitting atoms or molecules.     

交流示波极谱法中i_f～E曲线的研究 Ⅳ.示波极谱氧化还原滴定法

在i_f～E曲线的测量方法中,由于氧化和还原剂都具有电化学活性,因此,这两种试剂的量就可以通过不同电极电位处的法拉第电流峰敏锐地反映出来。当利用i_f～E曲线指示氧化还原滴定终点时,终点的示波图形,不仅反映氧化和还原剂电流峰的出现和消失,而且反     

Boosting the synthesis of value-added aromatics directly from syngas via a Cr2O3 and Ga doped zeolite capsule catalyst

Even though the transformation of syngas into aromatics has been realized via a methanol-mediated tandem process, the low product yield is still the bottleneck, limiting the industrial application of this technology. Herein, a tailor-made zeolite capsule catalyst with Ga doping and SiO₂ coating was combined with the methanol synthesis catalyst Cr₂O₃ to boost the synthesis of value-added aromatics, especially para-xylene, from syngas. Multiple characterization studies, control experiments, and density functional theory (DFT) calculation results clarified that Ga doped zeolites with strong CO adsorption capability facilitated the transformation of the reaction intermediate methanol by optimizing the first C–C coupling step under a high-pressure CO atmosphere, thereby driving the reaction forward for aromatics synthesis. This work not only reveals the synergistic catalytic network in the tandem process but also sheds new light on principles for the rational design of a catalyst in terms of oriented conversion of syngas.

The single-pass conversion of syngas into para-xylene was realized using a bifunctional catalyst Cr₂O₃/Ga-ZSM-5@SiO₂. The Ga species facilitates the methanol consumption process by C–C coupling optimization, enhancing the yield of the target aromatics.