Background-free,fast protein staining in sodium dodecyl sulfate polyacrylamide gel using counterion dyes,zincon and ethyl violet

A background-free, fast protein staining method in polyacrylamide gel electrophoresis using an acidic dye, zincon (ZC) and a basic dye, ethyl violet (EV) is described. It is based on the counterion dye staining technique that employs two oppositely charged dyes to form an ion-pair complex in staining solution. The selective binding of free dye molecules to proteins in acidic solution produces bluish violet-colored bands. It is a rapid and end-point staining procedure, involving only fixing and staining steps that are completed in 1-1.5 h. The detection limit of this method is 8-15 ng of protein that is comparable to the sensitivity of the colloidal Coomassie Brilliant Blue G (CBBG) stain. Due to its sensitivity and speed, this stain may be more practical than any other dye-based stains for routine laboratory purposes.     

Orthogonal PbS nanowire arrays and networks and their Raman scattering behavior

Three-dimensional, orthogonal lead sulfide (PbS) nanowire arrays and networks have been prepared by using a simple, atmospheric pressure chemical vapor deposition (APCVD) method. These uniform nanowires (average diameter 30 nm) grow epitaxially from the surface of the initial PbS crystal seeds and form orthogonal arrays and networks in space. The growth mechanism has been explored, and the process was classified as homogeneous, epitaxial growth in the 200 directions. Furthermore, Raman spectra of PbS nanowires are reported here, and their characteristic Raman peak (190 cm(-1), no shoulder) could be used as a unique probe for the study of PbS nanomaterials.     

A Novel Oxidative N-Demethylation of 12-Membered Macrolide with Lead Tetraacetate

Erythromycin has been extensively used in the treatment of bacterial infections for over 50 years1. In addition to the antimicrobial effect, the quite unique antiinflammatory activity of the erythromycin derivatives has attracted much attention as new the…     

Study on oxidation of polymers treated by high LET radiation

The oxidation of medical silicone rubber and segmented polyether urethane which were bombarded with 11.2 MeV Si⁺ or F⁺ at the dose of 5 × 10¹⁴ ions/cm² was studied. In XPS measurements, it was found that the oxygen concentration on the surface of the implanted polymeric membranes had been increasing in three months at least. ESR measurement showed that some free radicals existed in these membranes and their quantities decreased with time. Chemical analysis proved that peroxides were generated in the γ irradiated membranes. The reason for the increasing of oxygen concentration was that free radicals combined with oxygen in the air and produced peroxides on the membrane surface. Moreover, in order to demonstrate the radiation mechanism, low LET (γ rays) radiation of such polymeric membranes was carried out for comparison     

Radiocatalytic H2 production with gamma-irradiation and TiO2 catalysts

The radioactive concentrations of radionuclides were measured in the soil and groundwater below the 12 GeV proton beam-line tunnel at KEK. Various long-lived radionuclides, (⁷Be, ²²Na, ⁴⁶Sc, ⁵⁴Mn, ⁶⁰Co, ¹³⁴Cs, ¹⁵²Eu and ¹⁵⁴Eu) were observed in the soil samples by -ray spectra measurements, and ³H was also detected by liquid scintillation counting. On the other hand, ³H, ²²Na and ⁵⁴Mn, which were leached from the soil were measured in the groundwater below the EP2 beam line. ³H and ²²Na were also found in slight amounts in groundwater collected in a well dug beside the East Counter Hall. From a comparison with the radioactive concentration in soil and groundwater, the order of the leaching percentages were ³H>²²Na>⁵⁴Mn. This tendency was in agreement with an experimental result of the RI laboratory.     

Oxidation of Stereo‐regular Poly(styrene‐co‐4‐methylstyrene) by Cobalt(II) Acetate Tetrahydrate/Sodium Bromide Catalyst

Chemical modification on the stereo‐regular poly(styrene‐co‐4‐methylstyrene) (sPS‐PMS) was attempted in this study. Metallocene copolymerization of styrene (St) and 4‐methylstyrene (MSt) was performed by using η⁵‐pentamethylcyclopentadienyl‐titanium(IV)tributoxide (Cp*Ti(OBu)₃)/methylaluminoxane (MAO)/tri‐iso‐butylaluminum (TIBA) catalyst in the bulk state. Cobalt(II) catalyst was then applied to oxidize the benzylic methyl group on the MSt units of the resulting sPS‐PMS copolymer. Both aldehyde and carboxylic acid in the oxidized products were resolved by the FTIR and ¹H NMR. The oxidized sPS‐PMSs exhibit a low and a high‐temperature T_g and T_m corresponding to the transitions in the amorphous and the crystalline regions. Hydrogen‐bond and polar interactions between the aldehyde and carboxylic acids tend to interrupt the regular chain packing of the oxidized sPS‐PMS, resulting in the lowering of T_m with oxidation level. The oxidized sPS‐PMS showed better adhesion to glass fiber than pure sPS‐PMS copolymer as evaluated from the respective SEM fractured micrographs.     

新型含氟聚芳醚酮的合成与表征

聚芳醚酮具有很高的热稳定性和优良的电性能及机械性能 ,已经被广泛应用于宇航、电子及核能等高技术领域 [1] .氟元素的引入可以降低材料介电常数、折光指数和吸水率 ,提高热稳定性、溶解性和阻燃性 ,增加材料透明度 ,使这类聚合物在光电子、光学和微电子等应用领域的研究倍受关注 [2～ 4 ] .本文在合成含三氟甲基苯侧基的聚芳醚酮 [5] 的基础上 ,设计并合成了新型的含氟量更高的单体和聚合物 ,并对其性能进行了初步研究 .1　实验部分1 .1　试剂与仪器　 [3,5 -二 (三氟甲基 ) ]苯代对苯醌 (自制 ) ;锌粉 ,A.R.级 ,天津化学试剂一厂产品 ;…     

Ω型分子筛脱铝的核磁共振研究

在不同投料比（ＳｉＯ２／Ａｌ２Ｏ３＝１３．８，１９及２１）条件下，合成了三种Ω型分子筛原粉．对投料比为１３．８的原粉样品进行了四种不同方式的脱铝处理，即水热、ＳｉＣｌ４、ＥＤＴＡ和（ＮＨ４）２ＳｉＦ６处理，而形成了系列脱铝Ω型分子筛样品．对原粉及其脱铝样品进行了２９Ｓｉ和２７ＡｌＭＡＳＮＭＲ测试，确定出样品骨架硅铝比和铝在两种晶体学不等价Ｔ位上的占据比率，以探索四种脱铝方法的效果．实验结果与分析表明：在所有样品中，铝原子的占据具有择优Ｂ位的倾向；且铝在ＴＡ与ＴＢ位上的占据比率与合成条件有关；四种处理方式对Ω型分子筛的脱铝效果不尽相同．     

Novel photopolymerizable biodegradable triblock polymers for tissue engineering scaffolds: synthesis and characterization

For use in micro-patterned scaffolds in tissue engineering, novel diacrylated triblock macromers (PLA-b-PCL-b-PLA, PGA-b-PCL-b-PGA and PCL-b-PEO-b-PCL) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). All diacrylated polymers were designed as triblock copolymers and involved biodegradable blocks of relatively non-polar epsilon-caprolactone (CL) and polar monomers such as glycolide (GA), lactide (LA) or ethylene oxide (EO). All triblock polymers were prepared in molecular weights of a few kilo daltons via the anionic ring-opening polymerization (ROP) of the corresponding lactide, glycolide or caprolactone using stannous octoate [Sn(Oct)(2)] as catalyst. The polymers had low polydispersity indices, ranging from 1.23 to 1.56. Biodegradable polymeric networks were prepared with conversions of 72-84% via photopolymerization of the triblock diacrylated polymers with 2,2-dimethoxy-2-phenylacetophenone (DMPA) as photoinitiator. PLA-b-PCL-b-PLA copolymers crumbled easily and were not suitable for micro-patterning. PGA-b-PCL-b-PGA copolymers had higher water contact angles than PCL-b-PEO-b-PCL and were also cytocompatible with Fibroblasts 3T3.     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.