碎片超高速撞击防护结构粒子场三维重构

为模拟空间碎片超高速撞击航天器防护结构表面材料喷射/溅射粒子场演化过程,并获取粒子场相关物理信息,基于粒子场同轴激光全息图像开展了碎片撞击过程的三维重构技术研究.首先对全息图像进行边缘剪切和缩放,将其划分为分辨率300×300左右的子图像以便于进行网格剖分;对于粒子堆叠区域子图像,采用基于三角化的网格剖分算法;剖分后形成的单一粒子采用Sobel算子提取其二维轮廓,然后将其投影到特定的三维空间形成三维形体;基于MAXScript语言实现了粒子场演化过程模拟.重构结果表明,无论是粒子场静态三维重构结果还是其演化过程均与撞击试验全息图像吻合较好,从而验证了该重构技术的有效性,为研究空间碎片对航天器防护结构的损伤效应提供了一种新的思路.     

超声波法提取啤酒花中总多糖的工艺

采用超声波法提取啤酒花中总多糖.采用正交试验设计,以总多糖含量为评价指标进行实验.最佳提取工艺为:超声提取2次,加12倍量的水,每次40min,超声功率为160W.本提取工艺合理,啤酒花中总多糖提取率较高.     

分光光度法测定血清铁含量

为了达到简化操作流程、缩短测定时间的目的,本实验从样品的前处理、二氮杂菲添加量、反应时间等方面对国标测定水中铁含量的方法(二氮杂菲分光光度法,GB 8538-2008-4.15)作出改进。实验结果表明,采用干湿结合法对血清进行前处理可缩短处理时间,减少由于硝酸挥发给人体带来的伤害;二氮杂菲添加量为3mL,反应时间达14min后检测效果好,定量下限可达5mg/L。改进后测定血清铁的方法操作相对简单、检测时间短,易于推广应用。     

Adsorption of benzene and propene in zeolite MCM-22: a grand canonical Monte Carlo study

The GCMC (grand canonical Monte Carlo) simulation technique was used to predict the competition adsorption characteristics of benzene and propene in different pore systems of MCM-22. The nine-site model of benzene was used, which proved to be effective and efficient. The zeolite was divided into three adsorption sites following a simulated annealing method. It is found that benzene and propene have the same preferential adsorption site and a similar adsorption order in different sites. Moreover, the pure and mixture isotherms of the three sites are drawn. From the isotherms, we obtained a selectivity reversal of the mixture isotherms of benzene and propene in different sites. It is also noted that the competition adsorption in the three adsorption sites for the two adsorbates can fall into three successive steps and the adsorption order of propene in mixture in these three sites is S3→S1→S2. A new model is presented to predict the benzene and propene adsorption equilibrium in MCM-22. This approach yields better multicomponent equilibrium predictions than ideal adsorbed solution theory (IAST). Isotherms at different mole fraction of benzene in gas phase indicate an advantage to increase the feed radio of benzene and propene. Thus, this work is helpful for a better understanding of the adsorption mechanism of benzene and propene in MCM-22 and hence the relation of the catalytic properties of the zeolite to its structure.     

Direct Synthesis of PbO Nanoparticles From a Lead(II) Nano Coordination Polymer Precursor: Synthesis,Crystal Structure,and DFT Calculations of [Pb2(dmp)2(μ‐N3)2(μ‐ClO4)2]n with the First Pb2‐(μ‐ClO4)2 Unit

Nanostructures of a new coordination polymer of divalent lead with the ligand 2, 9‐dimethyl‐1, 10‐phenanthroline (dmp) containing the first Pb₂‐(μ‐ClO₄)₂ motif, [Pb₂(dmp)₂(μ‐N₃)₂(μ‐ClO₄)₂]_n ( 1 ), was synthesized by a sonochemical method that produces the coordination polymers at nano size. The new nanostructure was characterized by scanning electron microscopy, X‐ray powder diffraction, IR, ¹H NMR and ¹³C NMR spectroscopy, and elemental analysis. Compound 1 was structurally characterized by single‐crystal X‐ray diffraction and the single‐crystal X‐ray data shows that the coordination number of Pb^II ions is six, (PbN₄O₂), with two N‐donor atoms from aza‐aromatic base ligands and four O‐donors from two perchlorate anions and two N‐donors from two azide anions. It has a “stereo‐chemically active” electron lone pair, and the coordination sphere is hemidirected. The supramolecular features in these complexes are guided and controlled by weak directional intermolecular interactions. The chains interact with each other through π–π stacking interactions creating a 3D framework. The structure of the title complex was optimized by density functional theory calculations. Calculated structural parameters and IR spectra for the title complex are in agreement with the crystal structure. The PbO nanoparticles were obtained by thermolysis of 1 at 180 °C with oleic acid as a surfactant. The average diameter of the nanoparticles was estimated by the Scherrer equation to be 23 nm. The morphology and size of the prepared PbO samples were further observed using SEM.     

一类欠驱动旋转摆的非线性控制

欠驱动系统是一类构成系统的广义坐标维数多于控制输入维数的非线性系统.旋转摆属于典型的欠驱动系统,通过驱动杆的水平转动可使欠驱动杆由垂直下摆位置转到竖直向上位置.利用基于能量的控制方法设计了摇起控制器,使欠驱动杆由稳定平衡位置到达非稳定平衡区域,再由LQR方法设计平衡控制器,使其控制在非稳定平衡位置.两种控制器通过切换实现摇起和平衡控制转换.最后通过仿真实验验证了文中设计的两种控制器的有效性.     

往复式电镀金刚石线锯切割单晶硅片特性研究

通过往复式电镀金刚石线锯切割单晶硅片实验,分析了切片表面的微观形貌特点,研究了锯丝速度与进给速度对硅片的表面粗糙度、总厚度偏差(TTV)、翘曲度与亚表面损伤层厚度(SSD)的影响规律.结果表明:线锯锯切时材料以脆性模式去除,锯切表面的微观形貌呈现部分沟槽与断续划痕,并存在大量凹坑;锯丝速度增大,进给速度减小,表面粗糙度与SSD减小;锯丝速度增大,进给速度增大,硅片的翘曲度也随之增大;硅片TTV值与锯丝速度和进给速度的匹配关系相关.     

表面增强拉曼光谱应用于标记免疫多组分检测

作为一种新型的免疫检测方法, 表面增强拉曼光谱(SERS)技术被应用于标记免疫多组分检测. 以多种不同的标记分子(苯硫酚, 联吡啶类分子, 氰基吡啶类分子)分别标记多种不同免疫金溶胶, 通过抗体抗原之间所具有的特异吸附性, 进一步组装“固相抗体-待测抗原-标记免疫金溶胶”多组分三明治复合体系. 利用表面增强拉曼光谱谱峰较窄, 具有较强的分辨率及高灵敏度的特点, 对多种标记分子特征谱峰进行分析判断, 从而识别所加入的多种抗原, 实现SERS标记免疫多组分同时检测的目的, 并对其中氰基吡啶类分子的吸附进行了探讨.