ICP-MS法快速测定丙烯腈/乙腈中的铁、铜

采用带八级杆碰撞/反应池(ORS)的电感耦合等离子体质谱法(ICP-MS),直接测定丙烯腈或乙腈产品中的Fe、Cu,标准加入法定量.结果表明,方法的线性范围宽,线性相关系数均大于0.999.2种元素的相对标准偏差均低于5%,加标回收率在90%~110%.该方法简便、快速、准确.     

Cr/CeO2体系及其对乙烷脱氢反应催化性能的研究

The dehydrogenation reaction of ethane over Cr/CeO₂ catalysts in presence of CO₂ was studied with fixed-bed micro-reactor. The Cr/CeO₂ catalysts of different Cr loading have been synthesized using impregnation techniques. The Cr/CeO₂ system has already been found to be active and selective in the reaction at around 740 ℃. The function of carbon dioxide is to remove coke and hydrogen to accelerate dehydrogenation of ethane. The results of catalysts characterizations indicated that Cr³⁺ and Cr⁶⁺ occurred on the surface of the catalysts. The 1.2 mmol Cr/100m₂ CeO₂ catalyst sample with a monolayer dispersion of Cr on CeO₂ support showed a stronger surface acidity and a maximum yield of ethylene of about 35.5% at 36.6% conversion of ethane.     

ZnCl2熔盐的分子动力学模拟

近年来，若干作者根据几种粒子间函数，对ZnCl2熔盐结构做过分子动力学模拟［1－3］其出的Zn－Cl和Cl－Cl离子间的偏径向分布函数与中子衍射实测值符合较好，但Zn－Zn离子间距以及Zn－Zn间配位数计算值多偏高．鉴于Busing势函数在多价卤化物馆盐的分子动力学计算中应用效果较好[4],我们试用Busing势函数为基础对ZnCl2熔盐结构和能量做分子动力学计算．1研究方法计算所用粒子势为Busing势函数此处，Zi为离子的电行数（ZZn。＋＝2，Zcl－＝1），几；是离子有效半径，人为＊离子的“硬度”参数·据文献问，f二0．005071，尸zn。十二0．…     

臭氧与二乙胺和三乙胺气相反应的速率常数

利用自制的烟雾箱系统研究了臭氧与二乙胺和三乙胺的气相反应动力学. 实验过程中保证二乙胺和三乙胺浓度远远大于臭氧浓度, 使得实验在准一级条件下进行. 加入环己烷以消除实验过程中可能产生的OH自由基对反应的影响. 在(298±1) K和1.01×105 Pa条件下, 测得臭氧与二乙胺和三乙胺反应的绝对速率常数值分别为(1.33±0.15)×10^-17和(8.20±1.01)×10^-17 cm³·molecule^-1·s^-1. 与文献中已有的其它胺类的臭氧反应数据比较后发现, 臭氧与胺的反应可以用亲电反应机制来解释. 另外, 通过对比发现, 臭氧与三取代的烷基胺类的反应速率要远远大于其与二取代的烷基胺类的反应速率. 这在一定程度上可有助于解释外场观测到的气溶胶相中二烷基胺盐较多的事实. 利用测得的速率常数和大气中臭氧浓度, 还估算了二乙胺和三乙胺与臭氧反应的大气寿命. 结果显示, 与臭氧的反应是二乙胺和三乙胺在大气中的一种重要的消除途径, 尤其是在污染严重地区.     

Ultraviolet photodissociation dynamics of the SH radical

Ultraviolet (UV) photodissociation dynamics of jet-cooled SH radical (in X 2pi(3/2), nu"=0-2) is studied in the photolysis wavelength region of 216-232 nm using high-n Rydberg atom time-of-flight technique. In this wavelength region, anisotropy beta parameter of the H-atom product is approximately -1, and spin-orbit branching fractions of the S(3P(J)) product are close to S(3P2):S(3P1):S(3P0)=0.51:0.36:0.13. The UV photolysis of SH is via a direct dissociation and is initiated on the repulsive 2sigma- potential-energy curve in the Franck-Condon region after the perpendicular transition 2sigma(-)-X 2pi. The S(3P(J)) product fine-structure state distribution approaches that in the sudden limit dissociation on the single repulsive 2sigma- state, but it is also affected by the nonadiabatic couplings among the repulsive 4sigma-, 2sigma-, and 4pi states, which redistribute the photodissociation flux from the initially excited 2sigma- state to the 4sigma- and 4pi states. The bond dissociation energy D0(S-H)=29,245+/-25 cm(-1) is obtained.     

Synthesis and properties of one-dimensional Ni(Ⅱ) and Ni(Ⅱ)Cu(Ⅱ) complexes linked by hydrogen bond

Four dithiooxalato (Dto) bridged one-dimensional Ni(ll) and Ni(ll)Cu(ll) complexes (Me6[14]dieneN4)Ni2(Dto)2) (1), (Me6[14]dieneN4)CuNi(Dto)2 (2), (Me6[14]aneN4)Ni2(Dto)2 (3), and (Me6[14]aneN4)CuNi(Dto)2(4), were synthesized. These complexes have been characterized by elemental analysis, IR, UV and ESR spectra. The crystal structure of complex 3 was determined. It crystallizes in the monoclinic system, space group C2/c with a = 2.2425(4) nm, b = 1.0088(2) nm, c=1.4665(3) nm, β= 125.32(3)° ;Z=4; R = 0.076, Rw = 0.079. In the complex, Ni(1) coordinates four sulphur atoms of two Dto ligands in plane square environment. Ni(2) lies in the center of mac-rocyclic ligand. For Dto ligand, two sulphur atoms coordinate Ni(1), and O(1) coordinates Ni(2) and forms weak coordination bond. O(2) is linked to N(2) of macrocyclic ligand through hydrogen bond.     

Synthesis,crystal structure and magnetic properties of a novel manganese(II)-nitronyl nitroxide-azido(μ<Subscript>1,1</Subscript> and μ<Subscript>1,3</Subscript>) one-dimensional complex

A novel one-dimensional manganese(II) complex containing nitronyl nitroxide radical [Mn₂(IM2-py)₂(Ac)₂(μ_1,1-N₃)(μ_1,3-N₃) · EtOH] _n was synthesized and characterized structurally and magnetically. It crystallizes in the monoclinic space group p2₁/n. Each Mn(II) ion is six-coordinated in a distorted octahedral environment. The two N atoms of the nitronyl nitroxide radical and the two O atoms of acetate ligands are in the equatorial plane, whereas the two different azido bridging ligands are in trans axial position. Mn(II) ions are linked by nitrogen atom of μ_1,1-azido and oxygen atoms of two carboxy groups to form a Mn-Mn unit. Mn-Mn units are linked by azido ligands through μ_1,3 bridging style to form a one-dimensional chain. The compound is connected by the coordination bonds, π-π interactions and hydrogen bonds as a three-dimensional structure. Magnetic susceptibility data support that there are stronger antiferromagnetic interactions between the radical and Mn(II) ion, weak antiferromagnetic interactions between the Mn-R units, and very weak antiferromagnetic interactions between the R-Mn-Mn-R units.     

超分子砌块间苯二酚杯芳烃的研究进展

间苯二酚杯芳烃是一类以间苯二酚为单元的杯芳烃, 作为新一代超分子砌块, 在分子催化、分子识别、超分子自组装、晶体工程和纳米材料等方面都获得了广泛的应用, 已成为当今化学研究的新热点. 综述了间苯二酚杯芳烃的功能化修饰及其应用新进展.     

化学镀钴基合金镀液中钴的快速测定

研究了采用显色剂 苦胺酸偶氮变色酸对化学镀钴基合金镀液中钴含量进行测定的试验条件,在pH11的氨 氯化铵缓冲溶液中,钴与显色剂配合物的最大吸收峰在650nm波长处,钴(Ⅱ)在0～60μg/25ml范围内服从比耳定律,表观摩尔吸光系数为3.1×104L·mol-1·cm-1。该法测定钴的选择性好,在大量镍存在下,也能准确测定,对镀液样品进行了测定,相对标准偏差小于1%,结果满意。     

N-烷基壳聚糖玻璃化转变温度的研究

采用差示扫描量热(DSC)法和热释电流(TSC)法研究了N-烷基壳聚糖的玻璃化转变行为. DSC法中采用二次扫描以消除溶剂和热历史的影响, 并利用物理老化方法来增强N-烷基壳聚糖在DSC曲线上的玻璃化转变区域的热焓吸热峰, 以克服DSC法的不灵敏性. 两种研究方法的结果一致表明, 三种N-烷基壳聚糖的玻璃化转变均发生在110～150 ℃温区内；取代的柔性烷基越大, 玻璃化转变温度(Tg)越低；但N-甲基壳聚糖例外, 其Tg略高于壳聚糖, 空间阻碍在这里起决定的作用.