Synthesis and Crystal Structure of a New Mononuclear Nickel(Ⅱ) Mixed Complex Derived from 2-Aminoethyl-bi(3-bi-aminopropyl)amine with 1,10-Phenanthroline

The mixed complex [Ni(L)(L')](ClO4)2 has been synthesized using 2-aminoethyl- bi(3-bi-aminopropyl)amine with phen (1,10-phenanthroline) in the presence of Ni(II) ion, and its structure was determined by X-ray diffraction. The crystal crystallizes in monoclinic, space group P21/c with a = 13.713(2), b = 13.1466(19), c = 14.780(2) (A), β = 97.620(3)°, V = 2640.9(7)(A)3, F(000) = 1272, Z = 4, Dc = 1.540 g/cm3, R = 0.0536 and wR = 0.1207. The Ni2+ ion is six- coordinated to furnish a distorted octahedral geometry.     

Synthesis and Crystal Structure of a Coordination Polymer {[Co(phth)(phen)(H2O)]·(C2H5OH)}n

The coordination polymer {[Co(phth)(phen)(H2O)]·(C2H5OH)}n (phth = phthalate, phen = 1,10-phenanthroline) with formula C22H20CoN2O6 (Mr = 467.33) was synthesized by the solvothermal method under low temperature, and its crystal structure was determined by singlecrystal X-ray diffraction. The complex belongs to monoclinic system, space group P21/n with a =12.7352(16), b = 8.8125(11), c = 18.677(2) (A), β = 102.633(2)°, V = 2045.3(4) (A)3, Z = 4, Dc =1.518 g/cm3,μ = 0.882 mm-1, F(000) = 964, S = 1.053, the final R = 0.0401 and wR = 0.0984 for 3135 observed reflections (I ＞ 2σ(I)). Single-crystal X-ray analysis revealed that the Co(Ⅱ) ion is six-coordinated. The cobalt complex forms a one-dimensional chain structure via phthalate bridging ligand. In the cobalt complex, a 3D network structure is formed by π-π stacking interaction of 1,10-phenanthroline as well as intermolecular hydrogen bonding interactions.     

Synthesis, Spectroscopic Properties and Crystal Structural Characterization of a Triphenyltin(Ⅳ) Complex with 5-Bromonicotinic Acid

A novel organotin complex [Ph3Sn(C2H5OH)(OCOC5H3NBr)SnPh3(OCOC5H3NBr)]has been synthesized by the reaction of 5-bromonicotinic acid with triphenyltin hydroxide in ethanol and characterized by elemental analysis, IR and 1H NMR. The crystal structure was determined by X-ray single-crystal diffraction. The crystal belongs to the monoclinic system, space group P21/c with a = 15.564(2), b = 24.975(4), c = 12.2973(19) (A), β = 92.224(2)°, Z = 4, V = 4776.5(13) (A)3, Dc = 1.596g/cm3, μ(MoKα) = 2.765 mm-1, F(000) = 2264, R = 0.0385 and wR = 0.0667. In the molecular structure of the title complex, the tin atoms are five-coordinated in a trigonal bipyramidal geometry.     

磨料形貌及分散介质对4H碳化硅晶片研磨质量的影响研究

研磨作为4H碳化硅(4H-SiC)晶片加工的重要工序之一,对4H-SiC衬底晶圆的质量具有重要影响。本文研究了金刚石磨料形貌和分散介质对4H-SiC晶片研磨过程中材料去除速率和面型参数的影响,基于研磨过程中金刚石磨料与4H-SiC晶片表面的接触情况,推导出简易的晶片材料去除速率模型。研究结果表明,磨料形貌显著影响4H-SiC晶片的材料去除速率,材料去除速率越高,晶片的总厚度变化(TTV)越小。由于4H-SiC中C面和Si面的各向异性,4H-SiC晶片研磨过程中C面的材料去除速率高于Si面。在分散介质的影响方面：水基体系研磨液的Zeta电位绝对值较高,磨料分散均匀,水的高导热系数有利于控制研磨过程中的盘面温度;乙二醇体系研磨液的Zeta电位绝对值小,磨料易发生团聚,增大研磨过程的磨料切入深度,晶片的材料去除速率提高,晶片最大划痕深度随之增大。     

基于摩擦磨损的KDP晶体固结磨料抛光垫优化

本文通过固结磨料球与KDP晶体对磨的单因素试验探究固结磨料球中反应物种类、磨粒浓度、反应物浓度、基体硬度对摩擦系数、磨痕截面积和磨痕处粗糙度的影响,试验结果表明:KHCO₃固结磨料球对磨后磨痕对称性好,磨痕处的粗糙度值低;磨痕截面积随磨粒和反应物浓度的增加而增大,随基体硬度的增大而降低;磨痕处粗糙度随磨粒和反应物浓度的增加先降低后上升,随基体硬度的增大先上升后降低;摩擦系数受磨粒和反应物浓度影响不明显,随基体硬度的增大而降低。选择KHCO₃作为反应物,Ⅰ基体,磨粒浓度为基体质量的100%,反应物浓度为15%制备固结磨料球与KDP晶体对磨后的磨痕轮廓对称度好且磨痕处粗糙度值低,以该组分制备固结磨料垫干式抛光KDP晶体,可实现晶体表面粗糙度Sa值为18.50 nm,材料去除率为130 nm/min的高效精密加工。     

n型IBC太阳电池选择性发射极工艺研究

为提升n型叉指背接触(IBC)太阳电池的光电转换效率,采用丝网印刷硼浆和高温扩散的方式形成选择性发射极结构,研究了硼扩散和硼浆印刷工艺对电池发射极钝化性能和接触性能的影响。实验结果表明,在硼扩散沉积时间和退火时间一定的条件下,硼扩散通源(BBr₃)流量为100 mL/min,沉积温度为830 ℃,退火温度为920 ℃时,发射极轻掺杂(p⁺)区域的隐开路电压达到710 mV,暗饱和电流密度为12.2 fA/cm²。发射极局部印刷硼浆湿重为220 mg时,经过高温硼扩散退火,重掺杂(p⁺⁺)区域的隐开路电压保持在683 mV左右,该区域方块电阻仅46 Ω/□,金属接触电阻为2.3 mΩ·cm². 采用该工艺方案制备的IBC电池最高光电转换效率达到24.40%,平均光电转换效率达到24.32%,相比现有IBC电池转换效率提升了0.28个百分点。     

基于NURBS的叶片全三维气动优化设计

采用NURBS对叶轮机械叶片的关键截面和基迭线进行参数化表达,该表达方法为基于现代优化算法的叶片粘性气动最优化设计提供设计变量,以实现对叶片截面和叶片基迭线弯、倾、扭、掠变形的控制。该方法编写成的叶片全三维控制模块和网格自动生成程序、CFD程序集成到商业软件iSIGHT中,构成了叶片全三维粘性气动优化设计平台。在该平台上选用ASA成功进行了某透平静叶片的全三维粘性气动最优化设计。实验结果表明通过同时改变叶片截面和叶片基迭线的方法能够有效地抑制叶片的二次流损失,因此该设计平台在叶片气动优化设计中有广阔的应用前景。     

环糊精对(R)、(S)-2-丁醇手性分子识别的电喷雾电离质谱研究

电喷雾质谱(ESIMS)是一种极弱的离子化过程,它不仅能在不断裂共价键情况下使分子离子化,而且可以在离子化过程保持分子间的弱相互作用(非共价键作用),因此ESIMS在超分子领域已有不少报道[1-3]。分子手性识别对分析科学家、生物医药科学家而言是一项既具挑战性又十分重要的问题,     

壳聚糖的光度测定新方法

研究了以刚果红分光光度法测定壳聚糖,探讨了最佳实验条件及干扰因素的影响。在pH9．7时,刚果红和壳聚糖形成有色物质,检测波长为543．5nm,线性方程为：A=0．0200ρ＋0．0156,R^2=0．9978。在0～20．00μg／mL范围内呈现良好的线性关系,平均回收率为99．20％。采用该方法测定了两种复方样品中的壳聚糖,方法的选择性和灵敏度良好。该方法可用于检测复方样品中少量的壳聚糖。     

铂-丁二酮肟络合吸附波测定微量铂

铂和丁二酮肟在pH 4.1的HAc~NaAc支持电解质中,形成具有电活性络合物。在单扫示波极谱-0.88 V(vs.SCE)左右出现良好还原波。此波峰高与铂的浓度在1.0×10-8~4.0×10-6mol/L范围内呈线性关系。检出限为2.6×10-9mol/L。并成功的用于贵金属合成样及合金样品中铂量的测定。