Colloidal rings in a liquid mixture

We investigate the self-assembly of colloidal particles on microscopic decane droplets in water and show that, by use of paramagnetic colloids, it is possible to assemble ringlike structures that can be controlled with a magnetic field. Moreover, the use of paramagnetic colloids allows us to determine the attractive forces between the colloids located at the three-phase contact line between decane, water, and air. The attractive force is in the femtonewton range and is attributed to capillary interactions due to interface deformations. When the liquid emulsion dries on a glass slide, we observe solid deposits in the form of microscopic rings of varying diameters.     

Thermal density fluctuations in amorphous polymers as revealed by small angle X-ray diffraction

Summary Thermal density fluctuations in amorphous polymethyl methacrylate, polycarbonate and polyethylene terephthalate were studied by means of small angle X-ray scattering. The measurements were performed in a temperature range from 20 °C up to about 50 °C above the glass transition temperatureT _g of the individual sample.AboveT _g the experimental values of the fluctuations are proportional to the isothermal compressibility and the temperature of the sample as predicted by the fluctuation theory for a system in thermodynamic equilibrium.At temperatures belowT _g this relation is no longer correct. The experimentally determined fluctuations are now proportional to the compressibility of the sample in the equilibrium state atT _g and to the actual temperature of the glassy sample. By considering a statistical ensemble with exchange of energy, particles and order between the systems of the ensemble an equation can be derived for the fluctuations of the number of particles per given volume which predicts the observed behaviour. The order parameter takes into account the fact that the properties of the glassy state depend on the way by which the state was produced.

---

Zusammenfassung Es wurden thermische Dichtefluktuationen in amorphem Polymethylmethacrylat, Polycarbonat und Polyäthylenterephthalat mit Hilfe der Röntgenkleinwinkelstreuung untersucht. Die Messungen erstrecken sich über einen Temperaturbereich von 20 °C bis zu etwa 50 °C oberhalb der GlastemperaturT _g der jeweiligen Probe.In Übereinstimmung mit den Ergebnissen der Fluktuationstheorie sind die Fluktuationen oberhalb vonT _g proportional zur isothermen Kompressibilität und zur Temperatur der Probe.Unterhalb der Glastemperatur ist diese Beziehung nicht mehr erfüllt. Hier ist die Fluktuation proportional zur Kompressibilität der Probe im Gleichgewichtszustand beiT _g und zur Temperatur. Auf der Basis einer statistischen Gesamtheit mit der Austauschmöglichkeit von Energie, Partikel und Ordnung zwischen den Systemen der Gesamtheit kann eine Beziehung für die Dichtefluktuation abgeleitet werden, die mit den experimentellen Ergebnissen übereinstimmt. Der zusätzliche Ordnungsparameter berücksichtigt die Tatsache, daß die Eigenschaften im Glaszustand wegabhängig sind.

     

13C-NMR-spektren stereoisomerer 1,4-dialkylspiro[4.5]decan-derivate

The ¹³C NMR spectra of a series of 7-substituted 1,4-dialkylspiro[4.5]decanes and of suitable reference compounds are assigned and the derived substituent effects upon the chemical shifts are discussed. In particular, consideration of γ and δ-effects allows the differentiation between 1,4-cis- and 1,4-trans-compounds. Furthermore, the (relative) configuration of the chiral spiroatom C-5 is determined.     

Calculation of the frequencies and intensities in the infrared and raman spectra of cyclopropenone

By using the values of the vibrational frequencies of normal and deuterated cyclopropenone (II-d₀ , II-d₂ ) and ¹⁶ O-and ¹⁸ O-substituted dimethylcyclopropenone (III) as -well as the infrared and Raman intensities of II a consistent set of force constants has been derived for the cyclopropenone skeleton. The derived values show that the zwitterionic form makes a substantial contribution to the electronic ground state of the molecule. The combined frequency and intensity calculation - simulation of the infrared and the Raman spectrum - is shown to be a good method for making a proper assignment of calculated and observed vibrations and deriving realistic sets of force constants.     

Bestimmung von Nichtmetallen in Metallen

Zusammenfassung Unter der Beschränkung auf die Nichtmetallspuren in den technisch wichtigen Metallen und Legierungen wird ein allgemeiner Überblick gegeben.Aus der Vielzahl der Analysenmethoden werden die in breiterem Umfang anwendbare Verbrennung für die Bestimmung von Kohlenstoff und Schwefel und die Heißextraktion für die Bestimmung von Wasserstoff, Sauerstoff und Stickstoff näher behandelt.Für die Bestimmung von Wasserstoff und Sauerstoff in Aluminium und Kupfer und für den Kohlenstoffgehalt der Nichteisenmetalle wird der heutige Wissensstand gegeben.Über Untersuchungen zur Probenhomogenität von AKP für Sauerstoff in Metallen und über eine Methode zur Herstellung von entsprechenden Primärstandards wird berichtet.Betrachtungen zur Frage von Aufwand und Nutzen analytischer Arbeit werden angestellt.

---

Summary A general summary is given with a limitation to non-metal traces in metals and alloys of technical interest.From the great number of analytical methods those applicable on a larger scale, i.e. combustion-determination of carbon and sulphur — and vacuum fusion—determination of hydrogen, oxygen and nitrogen — are dealt with more closely.For the determination of hydrogen and oxygen in aluminium and copper as well as for the carbon contents of non-ferrous metals the present state of knowledge is described.Furthermore, investigations concerning homogenity of AKP-standard-samples for analysing the oxygen-contents in metals and a method for setting up respective primary standards are described.Finally, the problematic relation between expenses and usefulness of analytical work is discussed.

     

Fehlerquellen bei Aktivierungsanalysen hochreiner Materialien

Zusammenfassung Aus den Erfahrungen mit Neutronenaktivierungsanalysen von hochreinen Materialien der Elektronik werden die wichtigsten Fehlerquellen und die Möglichkeiten zu deren Vermeidung aufgezeigt. Von den spurenanalytischen Problemen muß vor allem der Probenhomogenität, den Oberflächenverunreinigungen und, bei chemischen Operationen vor der Bestrahlung, auch dem Blindwert erhöhte Aufmerksamkeit gewidmet werden. Hinzu kommen die für Aktivierungsanalysen spezifischen Gefahren der Probenveränderung durch Strahlungsaufheizung und Strahlungsrückstoß, der Ablauf unerwarteter Kernreaktionen bei extrem hohen Neutronenflüssen sowie die für chemische Trennungen störende Bildung heißer Atome. An Hand einiger Beispiele wird die Nützlichkeit der Ortung von Verunreinigungselementen durch autoradiographische Aufnahmen nachgewiesen.Vorgetragen anläßlich des 3. Seminars Aktivierungs-analyse im Kernforschungszentrum Karlsruhe, 30./31.Mai 1972.     

Kinetics evidence for a complex between peroxynitrous acid and titanium(IV)

The reaction between TiO(2+) and ONOOH in 0.9 M H(2)SO(4) provides evidence for direct formation, previously unobserved, of a HOONO-metal complex. The reaction proceeds via formation of an end-on complex (k = 3.0 x 10(2) M(-1) s(-1)) that rearranges to form a side-on complex (k approximately equal to 20 s(-1)). With ONOOH in excess, this rearrangement proceeds more slowly (k approximately equal to 0.1 s(-1)), probably because multiple hydrogen oxoperoxonitrate molecules form end-on complexes with oxotitanium(IV) and hinder rearrangement to the side-on complex. The absorption spectrum of the final product is that of TiO(2)(2+). Presumably, during the rearrangement or later, NO+ is lost.     

1-Alkoxy-2-azaallenyl-komplexe von chrom und wolfram

The successive reaction of (CO)₆M with Na[NCR₂¹] and [Et₃O]BF₄ yields (CO)₅M[C(NCR₂¹)OEt] (II: M = Cr; III: M = W; CR₂¹ = C(C₆H₄Br-p)₂ (a), CPh₂ (b), C(C₆H₄OMe-p)₂ (c), C(C₆H₄)₂O (d), CBu₂^tt (e)). Hexacarbonyltungsten, (CO)₆W, reacts with Na[NCPh₂] and MeOSO₂F to give (CO)₅W[C(NCPh₂) OMe] (IV). X-Ray analysis of IIe shows that: (1) the CNC fragment is almost linear (171.7°); (2) the two NC bond lengths are equal within experimental error; and (3) the O,C,Cr,N plane is perpendicular to the C(Me₃),C,N,C(Me₃) plane (90.0°). Therefore compounds II–IV are best described as 1-alkoxy-2-azaallenyl complexes.     

Diffusion behavior of pharmaceutical O/W microemulsions studied by dynamic light scattering

Dynamic light scattering experiments have been performed at various concentrations, of pharmaceutical oil-in-water microemulsions consisting of Eutanol G as oil, a blend of a high (Tagat O2) and a low (Poloxamer 331) hydrophilic–lipophilic balance surfactant, and a hydrophilic phase (propylene glycol/water). We probe the dynamics of these microemulsions by dynamic light scattering. In the measured concentration range, two modes of relaxation were observed. The faster decaying mode is ascribed classically to the collective diffusion D _c (total droplet number density fluctuation). We show that the slow mode is also diffusive and suggest that its possible origin is the relaxation of polydispersity fluctuations. The diffusion coefficient associated with this mode is then the self-diffusion D _s of the droplets. It was found that D _c and D _s had opposite volume fractions of oil plus surfactants (ϕ) dependence and a common limiting value D ₀ for ϕ=0. Average hydrodynamic radius (R _h=10.5 nm) of droplets was calculated from D ₀. R _h is supposed to compose the inner core, a surfactant film including possible solvent molecules, which migrate with the droplet. The concentration dependence of diffusion coefficients reflects the effect of hard sphere and the supplementary repulsive interactions which arises due to loss of entropy, when absorbed chains of surfactant intermingle on the close approach of the two droplets. This mechanism could also explain the observed stability of our systems. The estimated extent of polydispersity is 0.22 from the amplitude of slower decaying mode. The polydispersity in microemulsion systems is dynamic in origin. Results indicate that the time scale for local polydispersity fluctuations is at least three orders of magnitude longer than the estimated time between droplet collisions.     

Synthesen von Moniliformin,einem Mycotoxin mit Cyclobutendion-Struktur

Syntheses of Moniliformin, a Mycotoxine with a Cyclobutenedione Structure Six different routes to 3-hydroxy-3-cyclobutene-1, 2-dione ( 4 ), the free acid of the mycotoxine Moniliformin (=alkali salt of 4 ) are described. A common feature of all pathways is the synthesis of cyclobutanes having the oxidation level 6. Moniliformin precursors which are easily transformed to 4 by acid catalysed hydrolysis include [2+2]-cycloadducts of ketene with tetraalkoxy-olefins, 3,4,4-trialkoxycyclobutenes, derivatives of polyfluorinated cyclobutenes, the brominated [2+2]-cycloadduct of ethyl vinyl ether and dichloroketene, tetrabromocyclobutanone, [2+2]-photocycloadducts of dichlorovinylenecarbonate with dichloroethylenes, and the dimer of chloroketene. The most convenient synthesis via the [2+2]-cycloadduct of tetraethoxyethylene and ketene ( 14b ) is reported in detail and produces 4 in four simple steps in 57% overall yield. In addition, two new syntheses of squaric acid ( 56 ) are described.