Improved constraints on D0-D0 mixing in D0 --> K+ pi- decays from the Belle detector

We report the results of a search for D0-D0 mixing in D0 --> K+ pi- decays based on 400 fb(-1) of data accumulated by the Belle detector at KEKB. Both assuming CP conservation and allowing for CP violation, we fit the decay-time distribution for the mixing parameters x and y, as well as for the parameter R(D), the ratio of doubly Cabibbo-suppressed decays to Cabibbo-favored decays. The 95% confidence level region in the (x'2,y') plane is obtained using a frequentist method. Assuming CP conservation, we find x'2 < 0.72 x 10(-3) and -9.9 x 10(-3) < y' < 6.8 x 10(-3) at the 95% confidence level; these are the most stringent constraints on the mixing parameters to date. The no-mixing point (0,0) has a confidence level of 3.9%. Assuming no mixing, we measure R(D) = (0.377 +/- 0.008 +/- 0.005)%.     

焊缝散射对板中超声水平剪切导波直线合成孔径阵列成像的影响

为探讨焊缝散射与板中超声导波阵列成像之间的关系,提出了将散射渡越时间矩阵作为分析工具用来开展焊缝散射对板中超声水平剪切(Shear horizontal,SH)导波直线合成孔径阵列成像影响的研究。运用散射因子和散射渡越时间矩阵描述焊缝散射,结合分析超声SH导波直线阵列信号所特有的圆锥曲线特征和合成孔径成像算法,从导波阵列信号和阵列成像机理出发,重点研究了焊缝散射因子和散射渡越时间矩阵在阵列成像中的作用。结果显示,焊缝散射易造成同一成像散射体反射声波的阵列信号形成\     

Constraining Lorentz invariance violation from the continuous spectra of short gamma-ray bursts

In some quantum gravity theories, a foamy structure of space-time may lead to Lorentz invariance violation(LIV). As the most energetic explosions in the Universe, gamma-ray bursts(GRBs) provide an effect way to probe quantum gravity effects. In this paper, we use the continuous spectra of 20 short GRBs detected by the Swift satellite to give a conservative lower limit of quantum gravity energy scale MQG. Due to the LIV effect, photons with different energy have different velocities. This will lead to the delayed arrival of high energy photons relative to low energy ones. Based on the fact that the LIV-induced time delay cannot be longer than the duration of a GRB,we present the most conservative estimate of the quantum gravity energy scales from 20 short GRBs. The strictest constraint, M_(QG) 5.05 × 10~(14) GeV in the linearly corrected case, is from GRB 140622 A. Our constraint on MQG,although not as tight as previous results, is the safest and most reliable so far.     

利用紫外Mie散射激光雷达探测澳门地区沙尘暴事件

研制了一台工作波长为355nm的紫外高能Mie散射激光雷达,并利用该激光雷达在2010年一次沙尘暴事件期间对澳门上空的大气进行了探测,得到了澳门地区不同时刻的气溶胶消光系数垂直廓线。利用Fernald方法反演得到的气溶胶近地面消光系数随时间的变化与当地气象数据具有较好的一致性,气溶胶消光系数与当地可吸入颗粒物浓度的相关性达到了0.93。气溶胶垂直廓线显示,在沙尘暴来临期间存在明显的沙尘气溶胶凝集层。通过气溶胶轨迹倒推,分析了沙尘气溶胶的来源及路径。观测结果表明,该激光雷达可以在特殊天气条件下对澳门地区气溶胶进行有效探测,这将有助于深化对澳门上空气溶胶特性的研究。     

Spectroscopy of stripe order in La1.8Sr0.2NiO4 using resonant soft x-ray diffraction

Strong resonant enhancements of the charge-order and spin-order superstructure-diffraction intensities in La1.8Sr0.2NiO4 are observed when x-ray energies in the vicinity of the Ni L2,3 absorption edges are used. The pronounced photon-energy and polarization dependences of these diffraction intensities allow for a critical determination of the local symmetry of the ordered spin and charge carriers. We found that not only the antiferromagnetic order but also the charge-order superstructure resides within the NiO2 layers; the holes are mainly located on in-plane oxygens surrounding a Ni2+ site with the spins coupled antiparallel in close analogy to Zhang-Rice singlets in the cuprates.     

Temperature dependence of protein backbone motion from carbonyl 13C and amide 15N NMR relaxation

The NMR spin-lattice relaxation rate (R1) and the rotating-frame spin-lattice relaxation rate (R1rho) of amide 15N and carbonyl 13C (13C') of the uniformly 13C- and 15N-labeled ubiquitin were measured at different temperatures and field strengths to investigate the temperature dependence of overall rotational diffusion and local backbone motion. Correlation between the order parameter of the N-H vector, SNH2, and that of the carbonyl carbon, S2C', was investigated. The effective S2C' was estimated from the direct fit of the experimental relaxation rates and from the slope of 2R2-R1 vs. B2 using Lipari-Szabo formalism. The average SNH2 decreased by 5.9%, while the average S2C' decreased by 4.6% from 15 to 47 degrees C. At the extreme low and high temperatures the difference in the temperature dependence of the order parameters vanishes. At the intermediate temperatures they do not change by the same amount but they follow the same trend. On the same peptide plane along the protein sequence, S2C' and SNH2 are highly correlated. The results suggest that fast local motion experienced at the site of the N-H vector and carbonyl nucleus is more complicated than previously thought and it cannot be easily described by one single type of motion in a broad range of temperature.     

Multipeak fitting analysis of Raman spectra on DLCH film

The hydrogenated diamond‐like carbon (DLCH) film with 1‐µm thickness is deposited by direct hydrocarbon gas ion beam method on silicon wafer and annealed at 400 °C. Detailed Raman spectra feature are fitted from nine sets of different peak fitting functions, including Gaussian, Lorentzian and Breit‐Wigner‐Fano (BWF) functions. These fitting results obtained from a two‐peak combination show some specific variances on the G peak position, FWHM_G and I_D/I_G ratio for as‐deposited and as‐annealed DLCH films. The most popular two‐peak fitting method with full Gaussian function tends to exhibit a higher ratio of the G peak position shift and higher I_D/I_G ratio than others fitting methods, the drastic difference among the most popular G (G) & G (D) and B (G) & L (D) schemes also have brought out in I_D/I_G ratio. However, for a more complex four‐peak Gaussian function fitting Raman spectra, the I_D/I_G ratio is close to that of a two‐peak fitting function with a mixture functions of BWF (G) and L (D). Furthermore, a series of systematic peak fitting procedures and comparisons of Raman spectra have been discussed in this study. Copyright © 2009 John Wiley & Sons, Ltd.     

High-efficiency,high-speed VCSELs for optical interconnects

High-efficiency, high-speed, tapered-oxide-apertured vertical-cavity surface-emitting lasers (VCSELs) emitting at 980 nm have been demonstrated. By carefully engineering the tapered oxide aperture, the mode volume can be greatly reduced without adding much optical scattering loss for the device sizes of interest. Consequently, these devices can achieve higher bandwidth at lower current and power dissipation. In addition, the parasitics are reduced by implementing deep oxidation layers and an improved p-doping scheme in the top mirror. Our devices show modulation bandwidth exceeding 20 GHz, a record for 980 nm VCSELs. Moreover, 35 Gb/s operation has been achieved at only 10 mW power dissipation. This corresponds to a data-rate/power-dissipation ratio of 3.5 Gbps/mW. Most importantly, our device structure is compatible with existing manufacturing processes and can be easily manufactured in large volume making them attractive for optical interconnects.     

Facile Construction of 3D Reduced Graphene Oxide Wrapped Ni3S2 Nanoparticles on Ni Foam for High‐Performance Asymmetric Supercapacitor Electrodes

3D reduced graphene oxide (rGO)‐wrapped Ni₃S₂ nanoparticles on Ni foam with porous structure is successfully synthesized via a facile one‐step solvothermal method. This unique structure and the positive synergistic effect between Ni₃S₂ nanoparticles and graphene can greatly improve the electrochemical performance of the NF@rGO/Ni₃S₂ composite. Detailed electrochemical measurements show that the NF@rGO/Ni₃S₂ composite exhibits excellent supercapacitor performance with a high specific capacitance of 4048 mF cm^?2 (816.8 F g^?1) at a current density of 5 mA cm^?2 (0.98 A g^?1), as well as long cycling ability (93.8% capacitance retention after 6000 cycles at a current density of 25 mA cm^?2). A novel aqueous asymmetric supercapacitor is designed using the NF@rGO/Ni₃S₂ composite as positive electrode and nitrogen‐doped graphene as negative electrode. The assembled device displays an energy density of 32.6 W h kg^?1 at a power density of 399.8 W kg^?1, and maintains 16.7 W h kg^?1 at 8000.2 W kg^?1. This outstanding performance promotes the as‐prepared NF@rGO/Ni₃S₂ composite to be ideal electrode materials for supercapacitors.     

First-principles calculations for electronic and optical properties of the zinc-blende structured BeS compound under pressure

The electronic and the optical properties of the cubic zinc-blende (ZB) BeS under high pressure have been investigated by using \it ab initio plane-wave pseudopotential density functional theory method in the generalised gradient approximation (GGA) for exchange-correlation interaction. The electronic band structure and the pressure dependence of the total and partial densities of state under pressure are successfully described. Our calculations show that the ZB BeS has large and indirect band gaps associated with (Γ → X) transitions in ambient conditions. The results obtained are consistent with the experimental data available and other calculations. The optical properties, including dielectric function, energy-loss function, complex refractive index, reflection and absorption spectra, are investigated and analysed at different external pressures. The results suggest that the optical absorption appears mostly in the ultra-violet region and the curve of refractive index shift toward high energies (blue shift) with pressure increasing.