Hybrid organosilazane/organosilylamine telechelic oligomers—I. Two-dimensional NMR spectroscopy characterization of dimethylsilylethylenediamine oligomers

The detailed characterization of multifunctional hybrid organosilazane/organosilylamine telechelic oligomers by IR and ¹H, ¹³C and ²⁹Si NMR spectroscopy in one and two dimenions has been undertaken. The specific multifunctional oligomers, comprising NH/NH₂ or SiCl functionalities depending on the monomer feed-ratio, were prepared from mono- and di-functionally reacted dichlorodimethylsilane (DDS) and mono-, di-, tri- and tetra-functionally reacted ethylenediamine (EDA). Varying the feed-ratio afforded control of the microstructures of the oligomers and the preparation of oligomers with, in some cases, conterminously located silicon–chlorine (SiCl) groups. The combination of the NMR methods with the IR technique has enabled the detailed microstructural characterization of the oligomers and the identification of the functionalities therein. This approach and the knowledge gained from the DDS/EDA system has been applied to the microstructural characterization of other hybrid organosilazane/silylamine preceramic telechelic oligomers.     

固定区间平滑器的最优分解

本文提出了一种建立反向马尔可夫模型的新方法.并用点估计理论证明了离散时间系统的固定区间平滑状态估计可以分解为两个最优估计的线性组合.     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

InAs/GaAs自组织量子点的DLTS谱

将DLTS用于对InAs/GaAsQD结构样品的测量,测定了QD能级发射载流子的热激活能;获得了QD能级俘获电子过程伴随有多声子发射(MPE)、QD能级存在一定程度的展宽、以及在某些特定的生长条件下,存在亚稳生长构形的实验证据.结果表明:DLTS在QD体系的研究中有其特有的功能     

短脉冲载荷下金属材料的层裂破坏

 本文用点炮加载聚酯薄膜飞片撞击金属靶材料，飞片速度0.714~2.24 km/s，脉冲宽度40~80 ns，击靶压力为2.280~11.952 GPa。在回收的铝、铜和钢靶样品上观察到层裂现象。通过金相分析发现它们的破坏方式与在一般较长脉冲加载下的破坏方式相似，铝和铜以延性方式破坏；钢则以脆性方式破坏。一维和二维数值模拟结果表明通常的几种层裂判据在这个应力、应变和应变率范围内也基本上适用。     

A PICARD TYPE THEOREM AND BLOCH LAW

Ａ ＰＩＣＡＲＤ ＴＹＰＥ ＴＨＥＯＲＥＭ ＡＮＤ ＢＬＯＣＨ ＬＡＷ ￥ＹＥＹＡＳＨＥＮＧＡｂｓｔｒａｃｔ：Ａｐｉｃａｒｄｔｙｐｅｔｈｅｏｒｅｍｉｓｐｒｏｖｅｄ，ａｎｄａｃｏｕｎｔｅｒｅｘａｍｐｌｅｉｓｇｉｖｅｎｔｏｓｈｏｗｔｈａｔｔｈｅＢｏｌｃｈ...     

高频单线圈双调谐NMR单晶探头的研制

本文报道了一种测角单晶NMR探头。该探头采用单线圃双调谐电路,工作频率在90MHz-110 MHz连续可调,可进行交叉极化大功率去耦实验。文中提出了一种简单而有效的测角装置,可使单晶绕三个互相垂直轴转动实现单晶的NMR测量。作为典型的应用例子,本文利用该探头实现了单晶DGO(2NH₂CH₂COOH·H₂C₂O₄)屏蔽张量的测量。     

S－闭迹的S－变换

研究了无向图中生成闭迹的变换，给出了生成闭迹的Ｓ－变换。本文结果平行于文献〔１〕、〔２〕中关于欧拉闭迹和哈密顿圈变换的工作。     

铝合金变形抗力的实验研究

采用恒应变速率凸轮式形变压缩试验机试验了四种铝合金材料的变形抗力 ,分析了应变率和应变速率对变形抗力的影响 ,结果表明随应变的增加 ,变形抗力以近似幂函数关系增加 ,在此基础上建立了简单、适用的变形抗力计算模型     

苦丁茶与常用茶中微量元素分析

苦丁茶又称苦丁、苦簦、皋卢等 ,是我国南方和东南亚地区常饮的代用茶 .几千年民间饮用和现代医学验证苦丁茶具有清热解毒、杀菌消炎、活血脉、降血脂、降胆固醇等功效 .近 10年来 ,科技人员对苦丁茶的化学成分进行了多方面的研究 ,确定其中含有化学成分达 2 0 0多种[1] ,一部分与普通茶叶相同 ,如咖啡碱、多酚类、儿茶素、氨基酸等 ,但含量比普通茶叶低[2 ] ,此外 ,苦丁茶还含有熊果酸 (Ｕｒｓｏｌｉｃ ａｃｉｄ)、β 香树脂醇 (β Ａｍｙｒｉｎ)、蛇麻脂醇 (Ｌｕｐｅｏｌ)、熊果醇 (Ｕｖａｏｌ)和 β 谷甾醇 (β Ｓｉｓｔｅｒｏｌ)等 .但…