Intramolecular energy transferable (2,2‐diphenylvinyl)phenyl substituted poly(p‐phenylenevinylene) derivative with efficient photoluminescence and electroluminescence

A poly(p‐phenylenevinylene) (PPV) derivative containing a bulky (2,2‐diphenylvinyl)phenyl group in the side chain, EHDVP‐PPV, was synthesized by Gilch route. The reduced tolane‐bisbenzyl (TBB) defects, as well as the structure of the polymer, was confirmed by various spectroscopic methods. The intramolecular energy transfer from the (2,2‐diphenylvinyl)phenyl side group to the PPV backbone was studied by UV‐vis and photoluminescence (PL) of the obtained polymer and model compound. The polymer film showed maximum absorption and emission peaks at 454 and 546 nm, respectively, and high PL efficiency of 57%. A yellow electroluminescence (λ_max = 548 nm) was obtained with intensities of 6479 cd/m² when the light‐emitting diodes of ITO/PEDOT/EHDVP‐PPV/LiF/Al were fabricated. The maximum power efficiency of the devices was 0.729 lm/W with a turn‐on voltage of 3.6 V. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5636–5646, 2004     

Combined effects of clay modifications and compatibilizers on the formation and physical properties of melt‐mixed polypropylene/clay nanocomposites

The melt mixing technique was used to prepare various polypropylene (PP)‐based (nano)composites. Two commercial organoclays (denoted 20A and 30B) served as the fillers for the PP matrix, and two different maleated (so‐called) compatibilizers (denoted PP‐MA and SMA) were employed as the third component. The results from X‐ray diffraction (XRD) and transmission electron microscope (TEM) experiments revealed that 190 °C was an adequate temperature for preparing the nanocomposites. Nanocomposites were achieved only if specific pairs of organoclay and compatibilizer were simultaneously incorporated in the PP matrix. For example, PP/20A(5 wt %)/PP‐MA(10 wt %) and PP/30B(5 wt %)/SMA(5 wt %) composites exhibited nanoscaled dispersion of 20A or 30B in the PP matrix. Differential scanning calorimetry (DSC) results indicated that the organoclays served as nucleation agents for the PP matrix. Generally, their nucleation effectiveness increased with the addition of compatibilizers. The thermal stability enhancement of PP after adding 20A was confirmed with thermogravimetric analysis (TGA). The enhancement became more evident as a suitable compatibilizer was further added. However, for the 30B‐included composites, thermal stability enhancement was not evident. The dynamic mechanical properties (i.e., storage modulus and loss modulus) of PP increased as the nanocomposites were formed; the properties increment corresponded to the organoclay dispersion status in the matrix. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4139–4150, 2004     

海口市番茄反季节栽培品种比较试验初报

海口市番茄生产的正常季节是冬种春收。其产量虽然较高,但产值较低。本试验是通过引进耐热番茄品种,将播种期推迟到二月春种夏收,即反季节栽培。试种结果初步表明:泰引3号、扬帆2号等引进品种,在气温较高的条件下,植株生长正常,座果率较高,产量与品质能达到当地正常季节栽培的水平。我们初步认为,泰引3号比较理想,可在海口市郊进一步试种。     

单边双裂纹模型及其J积分的守恒性

针对某些工程结构特点,设计了单边双裂纹模型。然后先从理论上证明了其结构J积分的守恒性,再以焊接接头为例,通过体现焊接接头的几个特征参数,从力学和几何不均匀性两方面给予有限元方法数值实验证明,从而为工程结构中类似的缺陷评定奠定基础。     

Electrochemical studies of glutathione monolayer assembled on a polycrystalline gold electrode

The glutathione (GSH) monolayer and complex monolayer of GSH-metallic ion on polycrystalline gold electrode were studied by using K₃Fe(CN)₆ as the redox probe. As for the GSH monolayer, it was found that the metallic ions could open the ion-gate in the monolayer dramatically in the order La³⁺> Pb²⁺>>Ba²⁺>Ca²⁺ whereas Zn²⁺ ion closed the ion-gate. The complexes of GSH-metallic ions were capable of self-assembling the different kind of monolayer. All the differences were related to the structural configuration of the anchored GSH molecule, which changed with different metallic ions or pH. Biography:Fang Cheng (1971-) male, Ph. D, research direction: electroanlysis.     

毛织物起毛起球的研究及分析

通过实验研究影响毛织物起毛起球的基本因素，通过改变后整理工艺和采用抗起毛起球剂，探讨改善织物起毛起球的方法，从而提出一些改善织物起毛起球的工艺。     

Monte Carlo散射标记方法在辐射防护设计中的应用

在X射线检查系统中,辐射防护中除了需要重点考虑透射和漏射外,散射的成分也必须考虑,而且散射的影响变得越来越重要,这一点在同方威视的固定式、组合式和车载式系统中都已经得到了体现。针对散射的问题,该文进行了系统的研究,提出了在Monte Carlo计算中采用散射标记方法分析各散射体对于散射的贡献,克服了传统方法无法准确计算某一点的散射剂量率以及各散射体对散射的贡献的局限,并利用实验进行了验证。该文采用的计算工具是Geant4软件包。结果表明,该文提出的方法是可行的,尤其在复杂系统的辐射防护优化设计中具有较好的指导作用。     

论司马迁的商品经济创新思想

商品经济是否发达是某一历史时期社会发展的一个主要表现。但是,西汉时期,在前代统治者奉行“重农抑商”政策的情况下,在汉武帝独尊儒术强化思想统治的时候,司马迁能够首创经济史传,第一个系统的考察商品经济的发展及其特征,提出了一整套发展生产、扩大商品交换、富国富家的经济理论,总结了商人在商品经济中的作用以及经营管理之道,不仅使西汉走向了繁荣,而且达到了划时代的最高水平。司马迁的商品经济创新思想能发表在那样的时期,他的胆略和精神是难能可贵的,是值得我们认真清理的一笔财富。     

贵县式三水铝土矿微量元素地球化学特征及其意义

本文应用微量元素地球化学理论,通过研究区内地层、红土剖面及矿物相中微量元素含量分配特点,结合野外观察结果,得出了本区三水铝土矿的成矿源岩是郁江组地层的结论,为本区找矿提供了新的线索。