Oligomeric guanidine synthesis assisted by TFA-sensitive arylsulfonylthiourea

Through arylsulfonyl activation of thiourea, efficient synthesis of oligomeric guanidines can be achieved in either solution or solid-phase. Incorporation of TFA-sensitive arylsulfonyl groups, such as Pbf, during the synthesis greatly simplifies deprotection procedures for obtaining the final oligomeric guanidine products.     

类锂硅离子软X射线激光研究

在激光等离子体典型参数条件下，利用碰撞－辐模型计算了类锂硅离子５ｆ－３ｄ和４ｆ－３ｄ跃的粒子数反转比率和激光增益系数。讨论了不同热带条件和不同冷却速度下，激光增益系统数的变化。计算结果表明，高功率，短脉冲激光生产的高温等离子体在快速冷却条件下能产生软Ｘ射的线激光增益。     

Y32－300型四柱式压力机工作台的设计

利用弹性力学的变分原理，对Ｙ３２－３００型四柱式万能压力机主机工作台的强度和刚度进行了研究，并给出了估算其变厚度的实用方法。     

线性驱动下一级相变的重正化群理论

把重正化群理论应用于一受外场驱动而发生一级相变的系统中，结果表明，与有序化过程一样，该系统也由零温不动点所决定，并得到磁化强度及结构函数的新的动力学标度关系．由此可获得滞后回约面积与变场速率的标度关系．     

DA_1-100型多级自吸离心泵的研制

阐述了多级自吸泵在节能与操作简便方面的实用意义,并且利用外混式自吸原理,将一台普通节段式多级离心泵改造成一台多级自吸离心泵,同时保持了原有的性能和安装尺寸。还分析了两端轴封漏气的原因,并提出了解决的方法。     

The Existence of Periodic Orbits for Higher Dimensional Autonomous Systemswith Small Perturbations

ＴｈｅＥｘｉｓｔｅｎｃｅｏｆＰｅｒｉｏｄｉｃＯｒｂｉｔｓｆｏｒＨｉｇｈｅｒＤｉｍｅｎｓｉｏｎａｌＡｕｔｏｎｏｍｏｕｓＳｙｓｔｅｍｓｗｉｔｈＳｍａｌｌＰｅｒｔｕｒｂａｔｉｏｎｓＪｉａｎｇＬｉｑｉｎｇ（蒋里强）；ＺｈｏｕＹｉ（周毅）；ＦａｎＹｅ（范晔）（...     

过程控制中计算机图形信息压缩存贮和图形滚动方法

对工业生产过程控制和管理中的计算机图形显示,提出一种压缩存贮和滚动的新方法。新方法的实施,可使图形数据占用的存贮空间减少约80％,一般地不需使用外存,从而大大提高了显示速度,解决了普通微型机存贮空间和显示速度之间的矛盾,有效地提高了普通微机的功能/价格比。所提出的方法均经工程实践检验过,效果良好。     

用“多化一”最小二乘法建立吸附动力学方程

用若干个一元最小二乘法，建立多元经验公式；以吸附动力学方程为例，取得了预期的结果。     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

“J—646”新型光学光敏胶胶合工艺简介

“J—646”光敏胶具有透光率好,收缩率小,粘接强度适中,耐老化,毒性小和成本低廉等特点。本文简要介绍了该胶的胶合工艺。