Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

一类二维非线性Schrodinger方程的吸引子及其维数

本文研究了一类二维非线性Ｓｃｈｒｏｄｉｎｇｅｒ方程解的有限维行为，我们得到了此方程存在吸引子，并得到了此吸引子维数的上界估计     

“J—646”新型光学光敏胶胶合工艺简介

“J—646”光敏胶具有透光率好,收缩率小,粘接强度适中,耐老化,毒性小和成本低廉等特点。本文简要介绍了该胶的胶合工艺。     

不同激发密度下CdS晶体的光致发光和受激发射

本文主要研究在77-111K温度范围内、不同激发密度的N2激光器的337.1nm谱线激发下,激子-激子(Ex-Ex)、激子-载流子(Ex-e)的相互作用和发射一个LO声子(Ex-1LO)、两个LO声子(Ex-2LO)的自由激子的辐射复合行为.并在77K温度下观测到由Ex-Ex发射产生的受激发射.     

轴拉杆随机分析的域外奇点法

采用随机域外奇点法对轴拉杆件进行了分析．考虑杨氏模量的不确定性，得到了不同相关类型、不同相关长度下的解析解，并分析了相关类型、相关长度以及随机场中点离散法对位移方差的影响．     

金催化化学发光新体系——苯并吡喃化学发光分析法测定金矿中的痕量金

本文提出了一种测定矿样中痕量金的化学发光分析法,氯化6,7-二羟基-2,4-二甲基苯并吡喃-H_2O_2化学发光体系,方法的检出限为7ppb。工作曲线线性范围是10～1000ppbAu,测定的相对标准偏差小于7％。应用本法测定矿样中的金,结果良好。     

Structure and mechanical properties of Al/AlN multilayer with different AlN layer thickness

Nanometer scale Al/AlN multilayers have been prepared by dc magnetron sputtering technique with a columnar target. A set of Al/AlN multilayers with the Al layer thickness of 2.9 nm and the AlN layer thickness variation from 1.13 to 6.81 nm were determined. Low angle X-ray diffraction (LAXRD) was used to analyze the layered structure of multilayers. The phase structure of the coatings was investigated with grazing angle XRD (GAXRD). Mechanical properties of these multilayers were thoroughly studied using a nanoindentation and ball-on-disk micro-tribometer. It was found that the multilayer hardness and reduced modulus showed no strong dependence on the AlN layer thickness. Al2.9 nm/AlN1.13 nm multilayer had more excellent tribological properties than single layers and other proportion multilayers with a lowest friction coefficient of 0.15. And the tribological properties of all the multilayers are superior to the AlN single layer.