A Mössbauer spectroscopic study of an industrial catalyst for dehydrogenation of etylbenzene to styrene

Iron oxide catalyst with spinel structure used for dehydrogenation of ethylbenzene is one kind of important catalyst in petrochemical industry. In this work several series of industrial catalyst were prepared with different components and different manufacturing processes. Mössbauer Spectroscopy has been used to determine the optimal components and the better manufacturing process for spinel structure formation. The results may prove useful for producing the industrial dehydrogenation catalyst with better catalytic property.     

c轴定向氮化铝薄膜的制备

利用电子回旋共振 (ECR)微波增强化学气相沉积法 (PECVD)并使用氮气 (N2 ) ,氩气 (Ar)和AlCl3蒸气作为气源在直径为 6 .35cm的 (10 0 )单晶硅片表面制备了c轴定向氮化铝 (AlN)薄膜 ,并使用X射线衍射仪及其X射线特征能谱和扫描电镜 (SEM)分析了薄膜特征 ,研究了微波功率、基板温度和N2 流量对薄膜c轴定向的影响 ,得到了c轴偏差角小于 5°的高质量大面积AlN薄膜。     

THE TRANSFER BEHAVIOUR OF SOME CATIONS AT WATER／NITROBENZENE INTERFACE BY SEMIDIFFERENTIAL CYCLIC VOLTAMMETRY

The transfer of Sr~(2+) and Ba~(2+) ion, facilitated by 18-Crown-6 present in the aqueous phase, and of succinylcholine ion at w/nb interface were investigated by semi-differential cyclic voltammetry. A good polarographic curve of succinylcholine ion dissolved in water was obtained in the system of 0.01 mol/l LiCl (w)——0.01 mol/l TBATPB (nb). The peak current is directly proportional to the concentration of SC~(2+) ion. It can be used for the determination of SC and the detection limit is 1.05×10~(-5) mol/l.The apparent D~w and D~(nb) have been estimated. The transfer of Sr~(2+) and of Ba~(2+) at the interface are facilitated by 18-Crown-6 present in the aqueous phase and the peak current is directly proportional to the concentration of 18-Crown-6 in water. This method can be used for the determination of the complexing agent and for the stability constant of the complex formed in the aqueous phase.All the experimental results are in keeping with the theoretical.     

基于Web的学生工作管理系统的JSP设计与实现

阐述了咸宁学院学生工作管理系统的主要功能,针对本院学生工作管理的特点,采用JSP网页技术进行开发.介绍了系统所有模块的数据项和数据结构,并对部分系统具体实现给出了代码说明.该系统运行结果表明,它提高了学生管理工作的工作效率和管理水平.     

粘合衬对服装舒适性影响的研究

探讨了粘合衬与粘合工艺对服装透气性、透湿性及透水性影响的规律。得出服装的舒适性虽由面料决定,但辅料(粘合衬)的影响也不可忽视。粘合衬的涂胶种类,粘合衬本身的透气性与透湿性,以及非织造粘合衬底布的单位重量,机织粘合衬底布的覆盖系数等,均对服装舒适性有影响,从而为衬料的选择,以及粘合工艺参数的设定,提供了依据。     

具有两层基片的微带线的混合模分析

给出了有两层基片的微带线与频率有关的混合模分析，应用傅里叶交换域分析及新的矩阵研究推导出色散特性．除了波导波长以外，还根据功率一电流的定义计算了特征阻抗，波导波长和特征阻抗与频率的关系及其数据值结果，并将其与有关文献的结果相比较，其一致性很好．     

二层多目标规划的最优性条件

本文在集值优化的框架下提出了一个二层多目标规划模型（BLMOP）.利用集值映射的相依导数和相依上导数,给出了几个有关（BLMOP）的弱有效解的必要或充分最优性条件.     

两个组合恒等式的概率证明

给出了两个组合恒等式的概率证明，扩展了已知的结果。     

示差半微分循环伏安法研究琥珀酰胆碱在水/硝基苯界面的传递行为

研究了油/水界面电解的示差半微分循环伏安行为。在0.01mol/L LiCl(w)-0.01mol/L TBATCIPB(nb)体系“电位窗”比TBATPB(nb)向正方向扩展约50mV,残余电流基本消除,使“电位窗”内的平台向左右拓宽约50mV。算得界面电容约为16μF/cm~2。考察了琥珀酰胆碱离子在w/nb界面的传递伏安特性,结果与一般半微分循环伏安法相似。但峰形改善,检测限降低一个数量级(1×10~(-6)mol/L),相对标准偏差在5％以内,可用于定量测定琥珀酰胆碱。     

含有纯滞后对象的控制方法

评述纯滞后对象控制的两种典型方法─—大林算法和纯滞后补偿法的原理、优缺点、设计要求及存在问题，并讨论了两者的联系。