Laplacians and the Cheeger Inequality for Directed Graphs

We consider Laplacians for directed graphs and examine their eigenvalues. We introduce a notion of a circulation in a directed graph and its connection with the Rayleigh quotient. We then define a Cheeger constant and establish the Cheeger inequality for directed graphs. These relations can be used to deal with various problems that often arise in the study of non-reversible Markov chains including bounding the rate of convergence and deriving comparison theorems.Received September 8, 2004     

Diffusion of 99Tc in granite under aerobic and anoxic conditions

Summary  Vezetéknév     

分光光度法测定脯氨酸的含量

文章用分光光度法研究了脯氨酸与四氯对苯醌的荷移反应 .实验指出 ,在硼砂缓冲溶液中 ,脯氨酸与四氯对苯醌于 30℃的水浴中恒温 1 2 0 min,可形成 1∶ 1的稳定络合物 ,其λmax=35 8nm,表观摩尔吸光系数 ε=1 .5 0× 1 0 5L·mol- 1 ·cm- 1 ,在 60 ng·m L- 1 ～ 40 0 ng·m L- 1 的范围内符合比耳定律 ,用本方法测定药物制剂的含量与文献方法一致 ,回收率在 99.65 %～ 1 0 0 .7%范围内 ,相对标准偏差在 1 .4%以内 .     

类锂硅离子软X射线激光研究

在激光等离子体典型参数条件下，利用碰撞－辐模型计算了类锂硅离子５ｆ－３ｄ和４ｆ－３ｄ跃的粒子数反转比率和激光增益系数。讨论了不同热带条件和不同冷却速度下，激光增益系统数的变化。计算结果表明，高功率，短脉冲激光生产的高温等离子体在快速冷却条件下能产生软Ｘ射的线激光增益。     

Y32－300型四柱式压力机工作台的设计

利用弹性力学的变分原理，对Ｙ３２－３００型四柱式万能压力机主机工作台的强度和刚度进行了研究，并给出了估算其变厚度的实用方法。     

线性驱动下一级相变的重正化群理论

把重正化群理论应用于一受外场驱动而发生一级相变的系统中，结果表明，与有序化过程一样，该系统也由零温不动点所决定，并得到磁化强度及结构函数的新的动力学标度关系．由此可获得滞后回约面积与变场速率的标度关系．     

DA_1-100型多级自吸离心泵的研制

阐述了多级自吸泵在节能与操作简便方面的实用意义,并且利用外混式自吸原理,将一台普通节段式多级离心泵改造成一台多级自吸离心泵,同时保持了原有的性能和安装尺寸。还分析了两端轴封漏气的原因,并提出了解决的方法。     

The Existence of Periodic Orbits for Higher Dimensional Autonomous Systemswith Small Perturbations

ＴｈｅＥｘｉｓｔｅｎｃｅｏｆＰｅｒｉｏｄｉｃＯｒｂｉｔｓｆｏｒＨｉｇｈｅｒＤｉｍｅｎｓｉｏｎａｌＡｕｔｏｎｏｍｏｕｓＳｙｓｔｅｍｓｗｉｔｈＳｍａｌｌＰｅｒｔｕｒｂａｔｉｏｎｓＪｉａｎｇＬｉｑｉｎｇ（蒋里强）；ＺｈｏｕＹｉ（周毅）；ＦａｎＹｅ（范晔）（...     

用“多化一”最小二乘法建立吸附动力学方程

用若干个一元最小二乘法，建立多元经验公式；以吸附动力学方程为例，取得了预期的结果。     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.