乳液聚合共聚物玻璃化转变温度及其理论计算

从共聚单体的竞聚率、油相水相分布系数出发,通过动力学模拟计算了丙烯酸丁酯与醋酸乙烯酯乳液共聚物的链结构,并用Johnson公式对其玻璃化转变温度(T_g)进行了理论计算,给出了共聚物T_g及其对应聚合物的重量分布图。发现半连续共聚物有1个T_g,其值随共聚物组成而变化;但一步法共聚物有两个T_g:低温区T_g代表富丙烯酸丁酯共聚物,高温区T_g则代表PVA均聚物。计算结果与实验十分吻合。     

Imidazole Coordinated Sandwich-type Antimony Polyoxotungstates Na9[ {Na（H=O2}3{M（C3H4N2）}3（ Sb W9O33）2]·xH=O（M=Ni^Ⅱ, Co^Ⅱ, Zn^Ⅱ, Mn^Ⅱ）

The imidazole covalently coordinated sandwich-type heteropolymngstates Na9[ {Na（H=O2}3{M（C3H4N2）}3（ Sb W9O33）2]·xH=O（M=Ni^Ⅱ, Co^Ⅱ, Zn^Ⅱ, Mn^Ⅱ） were obtained by the reaction of Na2WO4·2H2O, SbCl3·6H2O, NiCl2·6H2O [MnSO4·H2O, Co（NO3）2·6H2O, ZnSO4·7H2O] and imidazole at pH≈7.5. The structure of Na9[{Na（H2O）2}3{Ni（C3H4N2）}3（SbW9O33）2]·32H2O was determined by single crystal X-ray diffraction. Polyanion [{Na（H2O）2}3{Ni（C3H4N2）}3（SbW9O33）2}3]^9- has approximate C3v symmetry, imidazole coordinated six-nuclear duster [{Na（H2O）2}3{Ni（C3H4N2）}3]^9＋ is encapsulated between two （α-SbW9O33）^9-, the three rings of imidazole in the polyanion are perpendicular to the horizontal plane formed by six metals （Na-Ni-Na-Ni-Na-Ni） in the central belt, and x-stacking interactions exist between imidazoles of neighboring polyanions with dihedral angel of 60%. The compounds were also characterized by IR, UV-Vis spectra, TG and DSC, and the thermal decomposition mechanism of the four compounds was suggested by TG curves.     

溶胶-凝胶法制备还原态K-Co-Mo催化剂的合成醇性能

应用溶胶-凝胶法制备了还原态K-Co-Mo催化剂, 比较了不同的组分和不同的反应条件对合成醇性能的影响。实验结果表明，适量钾和钴助剂的添加能显著提高催化剂合成醇的性能，尤其是提高了C2+醇的选择性。此外，反应温度、压力以及空速对合成醇影响明显，升高温度可以提高催化反应中低碳醇的收率，但选择性下降；增加压力和空速可以提高低碳醇的收率和选择性，对合成低碳醇有利。在230 ℃，6.0 MPa，14 400 h－1条件下，催化剂合成低碳醇的收率为375.4 g/kg·h，选择性为70.2%，C1OH/C2+OH为0.48。     

氢部分选择性催化还原NO反应研究

在低钯含量活性非均布Pd/Al2O3催化剂上，实现了富氧条件下，氢部分选择性催化还原NO过程，低温、富氧条件下NO的转化率高达80％－100％。NO直接分解实验表明，600℃，NO分解转化率在无氧时为17．3％，有0．5％氧存在时接近于0。氢非选择性还原NO条件下，100℃以下，NO转化率为100％。根据实验结果及文献，推测了氢部分选择性还原NO过程中可能存在的反应，不同的反应温度下，NO脱除反应有所不同。在115℃以下，NO还原产物为NH3；115℃－155℃，NO还原产物为NH3、N2O和N2；155℃以上，NO还原产物中无NH3存在。NO还原反应与氢氧反应是平行的竞争反应。     

微波辐照下无皂阳离子聚(St-MMA)高分子纳米粒子的制备和表征

讨论了微波辐照下 ,以丙酮 水为分散介质 ,利用阳离子型自由基引发剂偶氮二异丁基脒盐酸盐(AIBA)引发苯乙烯 (St)和甲基丙烯酸甲酯 (MMA)共聚 ,合成出表面带正电荷的P(St MMA)共聚物纳米粒子 ,考察了丙酮用量、单体和引发剂浓度对纳米粒子粒径、粒径分布和乳液稳定性的影响 .结果表明 ,丙酮 水的体积比由 0增加到 1 2 6∶1时 ,粒子的平均水化半径从 12 2 2 1nm降低到 2 4 6 8nm ,粒径分布变宽 ,乳液抗电解质稳定性逐渐增强 ;增加引发剂和共聚单体MMA的浓度 ,粒子的水化半径逐渐减小 ,粒径分散系数增大 .     

Two New C—21 Steroidal Glycosides from Cynanchum aurichulatum

Two new C-21 steroidal glycosides, cynanauriculoside I and cynanauriculoside Ⅱ, were isolated from the roots of Cynanchum aurichulatum. Their structures were established using spectroscopic methods including one and two-dimensional NMR.     

金(Ⅲ)与杯[4]乙酯合钠(Ⅰ)超分子化合物: [Na(C60H80O12)]+[Au(SCN)4]-的合成、结构及性能

A novel super molecule [Na(C₆₀H₈₀O₁₂)]⁺[Au(SCN)₄]^- was obtained by extraction of calix[4] arene (L) for an aqueous solution containing [AuCl₄]^-, and NaCl into CH₂Cl₂. The crystal structure and properties of the title super molecule were characterized by single-crystal X-ray diffraction, IR and ¹H NMR spectra. The X-ray single crystal structure analysis shows that the crystal was Tetragonal system with space group P4/n and the unit cell parameters were as follows: a=2.880 8(18) nm, b=2.880 8(18) nm, c=2.292 4(5) nm, and final R indices [I>2σ(I)]: R₁=0.048 5, wR₂=0.106 1. CCDC: 243229.     

FTIR-ATR技术研究聚氨酯类文物保护材料的光降解

Polyurethanes are one kind of relic protection materials commonly used. During artificial photo-ageing, three polyurethanes, HDI-based polyurethane, MDI-based polyurethane and TDI-based polyurethane, have been considered to undergo UV radiation. Photochemical degradation of the polyurethanes has been monitored by means of Fourier transform infrared spectroscopy with attenuated total reflection accessory （FTIR-ATR）. It was proved that the mechanism of the photochemical degradation of polyurethanes might be the scissions of carbamate （urethane） groups and the re-reactions of radical groups formed in the scission reactions. From the experiment results HDI-based polyurethane, an aliphatic diisocyanate, could be considered to be more suitably used as relic protection materials among these three polyurethanes for its ageing products with less color.     

IONIC CONDUCTIVITY OF METHYLSILOXANE TERMINATED POLYETHYLENE OXIDE WITH LITHIUM PERCHLORATE NETWORK FILMS

Complex films of crosslinked poly(methylsiloxane-co-ethylene oxide) and lithium perchlorate were prepared. These solid state polymeric electrolytes show a markedly higher ionic conductivity, and excellent flexibility. The ionic conductivity of the network films closed to 10~(-5) Scm~(-1) at room temperature. The effects of Li~+ content, species and contents of crosslinking agents, molecular weight of poly(ethylene oxide) and temperature on the ionic conductivity of the network films were also investigated.     

POLYMER-SUPPORTED LEWIS ACID CATALYSTS. Ⅵ. POLYSTYRENE-BONDED STANNIC CHLORIDE CATALYST

A polystyrene-bonded stannic chloride catalyst was synthesized by the method of lithium polystyryl combined with stannic chloride. This catalyst is a polymeric organometallic compound containing 0.25 mmol Sn (Ⅳ)/g catalyst. The catalyst showed sufficient stability and catalytic activity in organic reaction such as esterification, acetalation and ketal formation, and it could be reused many times without losing its catalytic activity.