HL-2Aװ����CXRS��ϵ�ϵͳ���

为了获取HL-2A等离子体的离子温度、旋转速度及其分布等重要参数,首次在HL-2A装置上开展了CXRS诊断。通过利用能有效探测微弱光的EMCCD和特殊设计的光学采集系统,获得了具有足够信噪比的诊断信号。实验得到的测量信号分析表明,设计是切实可行的。     

A novel simulation method to evaluate the collection performance of a monolithic active pixel sensor

A novel simulation method is presented in this paper to evaluate the collection performance of monolithic active pixel sensor (MAPS) devices for minimum ionizing particle tracking. A simplified 3D matrix pixel structure is built using the computer aided design software Sentaurus. The virtual device is then divided into hundreds of parts and an independent customized X photon model is involved in each part to simulate the conditions under ⁵⁵Fe radiation. After data processing and analysis, charge collection efficiency, collection time and diffusion conditions can be estimated in detail. In order to verify the reliability of the method, comparisons are made between the simulations and experiments. Although there are some defects, it can be concluded that the proposed idea is a feasible method for the evaluation of the MAPS collection performance.     

Study of radiation background at the north crossing point of the BEPCⅡ in collision mode

Understanding the radiation background at the north crossing point (NCP) in the tunnel of BEPCII is crucial for the performance safety of the High Purity Germanium (HPGe) detector, and in turn of great significance for long-term stable running of the energy measurement system. Therefore, as the first step, a NaI(Tl) detector is constructed to continuously measure the radiation level of photons as background for future experiments. Furthermore, gamma and neutron dosimeters are utilized to explore the radiation distribution in the vicinity of the NCP where the HPGe detector will be located. Synthesizing all obtained information, the shielding for neutron irradiation is studied based on model-dependent theoretical analysis.     

Cosmic ray test for a T0 detector

The endcap of time-of-flight (ETOF) detector in BES (Beijing Spectrometer) III is planned to be upgraded by using multi-gap resistive plate chambers (MRPCs) and the designed time resolution of the MRPCs is around 50 ps. Thus a time-zero (T0) detector needs to be built to offer a high quality reference time for the MRPCs beam test. So a T0 detector is built using plastic scintillator tiles (BC420) to couple with four fast phototubes (PMTs, Hamamatsu H6533). The timing properties of the detector is studied by using a cosmic ray test and factors related to the time resolution, such as plastic scintillator size, readout mode and angle effects, are discussed. T0 detector timing resolutions of ～41-62 ps are achieved, which means that the T0 detector can be used in the MRPC beam test.     

红色荧光粉NazCa1-x-2y-zBiyMoO4∶Eu3+x+y发光研究

采用高温固相法制备系列红色荧光粉Naz Ca1-x-2y-zBiyMoO4 ∶ Eu3+x+y (y,z=0,x=0.24,0.26,0.30,0.34,0.38; x=0.30,y=0.01,0.02,0.03,0.04,0.05,0.06,0.07,z=0; x=0.30,y=0.04,z=0.38).用X射线粉末衍射(XRD)法测试了所制样品晶相结构.采用荧光光谱仪对样品的发光性能进行了表征,结果表明:当Eu3+单掺杂量浓度x=0.30时,荧光粉(Ca0.70 MoO4∶Eu3+0.30)的发光强度最强;当Eu3+-Bi3+共掺杂量浓度y=0.03时,电荷迁移带(CTB)强度达到最强,而对于Eu3+特征发射峰,当共掺杂浓度y＜0.03时,位于393 nm处的激发峰强度比464 nm强,共掺浓度y＞0.03时,464 nm峰比393 nm峰强,共掺浓度为y=0.04时,393和464 nm处两峰位置强度都达到最强.作为电荷补尝剂的Na2 CO3掺入上述荧光粉中后,荧光粉激发和发射强度明显地增强.结果表明,通过调节Bi3+ /Eu3+掺杂比例可以改变位于近紫外光393 nm和蓝光区464 nm处激发光相对强度.     

ON A KAHLER VERSION OF CHEEGER-GROMOLL-PERELMAN＇S SOUL THEOREM

In this note, we will prove a Kahler version of Cheeger-Gromoll-Perelman＇s soul theorem, only assuming the sectional curvature is nonnegative and bisectional curvature is positive at one point.     

一类矩阵方程的Hermitian R-对称定秩解

本文研究了矩阵方程AX = B 的Hermitian R-对称最大秩和最小秩解问题. 利用矩阵秩的方法, 获得了矩阵方程AX = B有最大秩和最小秩解的充分必要条件以及解的表达式, 同时对于最小秩解的解集合, 得到了最佳逼近解.