SiH4激光等离子体内自由基反应动力学研究

本工作采用时间分辨的OES(Optics Emission Spectroscopy)技术,研究横向激励大气压(TEA)CO₂激光诱发的SiH₄等离子体内碎片反应动力学过程。实验结果表明,等离子体内某些碎片的发光特征谱线主峰位置明显不同。据此,讨论了各碎片的产生及反应过程。比较各碎片发光的持续时间及综合其它OES结果,我们认为SIH₄激光等离子体的最终反应通道为产生Si的通道。 关键词：     

强流RFQ的稳定性设计研究

对强流RFQ耦合间隙的确定、二极模稳定杆的设计进行了详细的研究和讨论.利用现有的RFQ冷模,进行了本征模频率的测量、场分布的调试和测量、二极模稳定杆的试验.并通过与模拟结果的比较,验证了模拟程序在RFQ腔体设计中的可靠性.同时,对影响RFQ稳定性设计的物理进行了有益的探讨.     

电热蒸发进样微波等离子体炬原子发射光谱法中共存元素的影响

本文考察了以微波等离子体炬（MPT）为光源，电热钽丝环进样时，溶液中共存元素对发射信号的影响。     

气相色谱-质谱联用法测定维生素C泡腾片中的甜蜜素

采用气相色谱-质谱(GC-MS)选择离子监测法(SIM),建立了准确可靠、灵敏度高、快速简便的测定维生素C泡腾片中甜蜜素含量的新方法.样品中的甜蜜素衍生后用有机试剂提取,在选择离子模式下进行测定,以保留时间和特征离子比例进行定性,单离子定量.甜蜜素的线性范围为0.05-10mg/L,检出限为0.6mg/kg,回收率为90.5%-96.9%,相对标准偏差小于4.4%.方法分析所用时间短,结果准确可靠,选择性好,适用于维生素C泡腾片中甜蜜素含量的检验.     

4×20T/h锅炉房质量事故的分析与处理

在工程建设中 ,由于施工疏忽大意 ,组织不当 ,操作失误 ,造成的工程质量事故屡有发生 ,给生产和使用带来隐患 .为保证工程正常使用 ,必须进行处理 .简单的方法是推倒重来 ,这样势必造成巨大的经济损失 ,有时由于工期因素的影响 ,也不允许这样做 .因此针对不同的工程质量事故要采取不同的处理方法 ,在满足生产使用的前提下 ,尽量使工程事故损失降低到最小程度 ,本文介绍的是一起严重的工程质量事故的处理方法 .     

纤维双相钢的组织形成及对性能的影响

研究了纤维双相15Mn2Nb钢组织的形成及对性能的影响.结果表明,纤维双相钢具有优异的强塑性匹配,是一种天然的复合材料.其纤维组织的获取主要取决于合金化和热处理工艺规程,而合金元素Nb阻碍铁素体再结晶是形成纤维组织的关键.     

Completeness and unbiased estimation of mean vector in the multivariate group sequential case

We consider estimation after a group sequential test about a multivariate normal mean, such as a χ² test or a sequential version of the Bonferroni procedure. We derive the density function of the sufficient statistics and show that the sample mean remains to be the maximum likelihood estimator but is no longer unbiased. We propose an alternative Rao-Blackwell type unbiased estimator. We show that the family of distributions of the sufficient statistic is not complete, and there exist infinitely many unbiased estimators of the mean vector and none has uniformly minimum variance. However, when restricted to truncation-adaptable statistics, completeness holds and the Rao-Blackwell estimator has uniformly minimum variance.     

《电子线路CAD-PROTEL》课程的教学探讨

PROTEL在当前的电子类企业和单位有着广泛的应用,因此在教学的过程中应该以"实践为主,重在应用"为原则,着重培养学生的应用能力.     

Synthesis and properties of noncoplanar rigid‐rod aromatic polyhydrazides and poly(1,3,4‐oxadiazole)s containing phenyl or naphthyl substituents

Two new phenyl‐ and naphthyl‐substituted rigid‐rod aromatic dicarboxylic acid monomers, 2,2′‐diphenylbiphenyl‐4,4′‐dicarboxylic acid ( 4 ) and 2,2′‐di(1‐naphthyl)biphenyl‐4,4′‐dicarboxylic acid ( 5 ), were synthesized by the Suzuki coupling reaction of 2,2′‐diiodobiphenyl‐4,4′‐dicarboxylic acid dimethyl ester with benzeneboronic acid and naphthaleneboronic acid, respectively, followed by alkaline hydrolysis of the ester groups. Four new polyhydrazides were prepared from the dicarboxylic acids 4 and 5 with terephthalic dihydrazide (TPH) and isophthalic dihydrazide (IPH), respectively, via the Yamazaki phosphorylation reaction. These polyhydrazides were amorphous and readily soluble in many organic solvents. Differential scanning calorimetry (DSC) indicated that these hydrazide polymers had glass transition temperatures in the range of 187–234 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the range of 300–400 °C. The resulting poly(1,3,4‐oxadiazole)s exhibited T_g's in the range of 252–283 °C, 10% weight‐loss temperature in excess of 470 °C, and char yield at 800 °C in nitrogen higher than 54%. These organo‐soluble polyhydrazides and poly(1,3,4‐oxadiazole)s exhibited UV–Vis absorption maximum at 262–296 and 264–342 nm in NMP solution, and their photoluminescence spectra showed maximum bands around 414–445 and 404–453 nm, respectively, with quantum yield up to 38%. The electron‐transporting properties were examined by electrochemical methods. Cyclic voltammograms of the poly(1,3,4‐oxadiazole) films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited reversible reduction redox with E_onset at ?1.37 to ?1.57 V versus Ag/AgCl in dry N,N‐dimethylformamide solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6466–6483, 2006     

Effect of the pore surface modification of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes

We have investigated the effect of the surface state and surface treatment of the pores of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes. Shirasu porous glass (SPG) was used as the inorganic substrate, and methyl acrylate was used as the grafting monomer. The grafting rate increased as the density of silanol on the SPG substrate increased. This result suggests that radicals are generated mainly at the silanol groups on the pore surface by plasma irradiation. The SPG substrates were treated with silane coupling agents used to control the mass of organic material bonded to the pore surface. The thickness of the grafted layer became thinner as the mass of organic material bonded to the pore surface of SPG increased. This decrease in the thickness of the grafted layer could be explained by the decrease in the penetration depth of vacuum ultraviolet rays contained in plasma having a wavelength of less than 160 nm that generated radicals in the pores of the substrate. The thickness of the grafted layer inside the SPG substrates could be controlled through the control of the mass of organic material bonded to the pore surface of the SPG substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 846–856, 2006