CHARACTERIZATION OF AMPHIPHILIC AND MICROPHASE SEPARATED GRAFT COPOLYMERS Ⅱ SURFACE CHARACTERIZATION AND IN VITRO BLOOD-COMPATIBILITY ASSESSMENT OF POLYSTYRENE-GRAFT-ω-STEARYLPOLY (ETHYLENE OXIDE)*

This paper reported the research results concerning the surface characterization ofpolystyrene-graft-w-stearyl poly(ethylene oxide) (PS-g-SPEO) by means of XPS,contactangle measurement and TEM, and its in vitro blood compatibility assessment by measuringthe plasma recalcification time (RT) and partial thromboplastin time (PTT). The XPSresults demonstrated that the surface and bulk composition of the PS-g-SPEO graftcopolymers differ remarkably from each other,and that SPEO component was constantlyenriched at the copolymer/air interface. Contact angle studies indicated that the surfacewater wettability can be adjusted effectively by changing the composition of the copolymer.PS-g-SPEO graft copolymers can undergo microphase separation as clearly illustrated byTEM photographs. The relationship between the surface properties of PS-g-SPEO graftcopolymer and its blood compatibility was also discussed.     

五配位Cu(Ⅰ)配合物[Cu(4′-Phtpy)(PPh_3)_2](BF_4)的合成、结构及光谱性质研究

由[Cu(MeCN)2 (PPh3)2 ](BF4 )和 4′ 苯基 2,2′:6′,2″ 三联吡啶(4′ Phtpy)在室温下反应,合成了一个新颖的具有光致发光性能的五配位配合物[Cu(4′ Phtpy)(PPh3)2 ](BF4 ).对配合物进行了X射线衍射结构表征,并进行了红外光谱、紫外可见光谱、荧光光谱等光谱学分析.晶体属单斜晶系,空间群Pn,晶胞参数:a =1 0 80 7(6)nm,b =1 0 943 (6)nm,c=2 1610(12 )nm,α =90°,β =10 2 785(10 )°,γ =90°,V =2 492(2 )nm3,Z =2,Dc=1 3 5 4g·cm-3.配合物中,Cu(Ⅰ)与 4′ Phtpy的 3个N,2个PPh3的P配位呈变形三角双锥型结构,其轴向由Cu键合联吡啶的末端 2个N所组成,赤道平面由联吡啶的中心N原子和 2个PPh3的P原子所组成     

K＋I~2→K^+＋I~2^-离子对生成反应态－态几率与 选态截面的量子散射理论研 究

本文用Miller的-矩阵变分法在Aten-Lanting-Los两态势能面上计算了K＋I~2→K^+＋I~2^-电离反应的态－态几率和选态反应截面,结果表明了低电离阈能、几率的振荡行为及振动增强效应;电离截面随碰撞能及I~2振动量子数的变化规律与实验预测相吻合;讨论了反应机理。     

三(邻氯苄基)氯化锡的合成、结构和量子化学研究

邻氯苄基氯与锡反应合成三(邻氯苄基)氯化锡，经x射线方法测定了新化合物 的晶体结构，化合物属三方晶系，空间群为R-3，晶体学参数：α=b=1．3583(4) mn，c=2．1147(8)am，v=3．3790(19)nm~3，Z=6，μ(Mo kα)=16．11cm~-1， r (000)：1572，R_1=O．0755；Sn-C键长分别为0．2148(13)和0．220(2)nm，Sn-C1 键为0．2528(15)和0．2477(13)Bill．中心锡原子与亚甲基碳和氯原子构成畸型四 面体．并对其结构进行量子化学从头计算，探讨化合物的稳定性、分子轨道能量、 原子净电荷布居规律以及一些前沿分子轨道的组成特征．     

SYNTHESIS OF POLY ( ETHER-URETHANE) CONTAINING PENDANT AMINO GROUP

This paper is concerned with the synthesis of poly (ether-urethane) with pendant amino groups. The copolyether produced by ring opening copolymerization of tetrahydrofuran and epibromohydrin was treated with sodium azide in dimethylformamide to form azido substituted copolyether. The poly (ether-urethane) made from it was subjected to reduction reaction to convert azido group to amino group. The stress-strain behavior and dynamic-mechanical properties of poly (ether-urethane) containing pendant amino groups were studied.     

Octa-membered Water Ring Chain Based on Sulfonic Group in Ni（Ⅱ） Complex with 2-[（E）-（2-Oxidophenyl）methyleneamino] Ethanesulfonato and 2,2＇-Bipyridinyl

The title compound, [Ni（tssb）（2,2-bipy）2].5（H2O） 1 （tssbH2 =2-[（E）-（2-oxido- phenyl）methyleneamino]ethanesulfonato, 2,2-bipy = 2,2＇-bipyridinyl）, belongs to orthorhombic, space group Pbcn with a = 20.3983（18）, b = 17.6929（15）, c = 17.0897（15） nm, V= 6167.8（9） nm^3, Mr= 688.38, Z = 8, De = 1.481 g.cm^-3, F（000） = 2880,μ = 0.758 mm-1 and S =1.099. Each NiIr atom is six-coordinated by one N and one O atoms from one tssb^2- anion and four N atoms from two 2,2-bipy ligands to give a distorted octahedral geometry. Noticeably, there exists a rare octa-mem- bered water ring which presents a 1D chain by sulfonic group.     

微波固相法合成钠快离子导体Na5YSi4O12

应用微波方法合固相反应难于制备的Ｎａ５ＹＳｉ４Ｏ１２纯相，讨论了微波合成条件对产物的影响，与溶胶－凝胶法相比，微波法反应速率快，选择性强，合成的样品具有特异的聚集态，缺陷和微结构，从而导致离子导电活化能下降。     

三维银配位聚合物[Ag3(IN)2(CF3COO)]的水热合成与晶体结构

本文在水热条件下, 通过4-氰基吡啶发生原位水解得到异烟酸, 将其与AgCF3CO2作用合成了新型银配位聚合物, 并通过元素分析和X射线单晶衍射分析等手段对其结构进行了表征.     

PHOTOSENSITIVITY OF Ce (Ⅳ) INITIATED METHYL ACRYLATE POLYMERIZATION

The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.     

STUDIES ON CHARGE TRANSFER POLYMERIZATION——POLYMERIZATION OF ACRYLONITRILE INITIATED WITH PHENYL HYDRAZINE AND ITS DERIVATIVES

The photopolymerization of acrylonitrile (AN) initiated with phenyl hydrazine (PHZ) and its derivatives has been studied. The initiator exponent and monomer exponent were determined from the kinetic investigation to be 0.66th and 2.1th respectively and the overall activation energy was 33.4KJ/mol for the PHZ-AN system. Spectral analysis and other data indicate that a charge transfer complex between PHZ as a donor and AN as an aceeptor is formed. The initiation mechanism was proposed.