THE DESIGNS OF HIGH EFFICIENCY LAUNCHER OF QUASI-OPTICAL MODE CONVERTER FOR HIGH POWER GYROTRONS

A high efficiency launcher of quasi-optical (QO) mode converters for high power gyrotrons have been designed and tested. A helical cut launcher radiates the RF power via its straight cut onto the first phase correcting mirror. The launchers have been optimized for the TE_31.8 mode at 170 GHz and TE_22.6 mode at 110 GHz by numerically optimizing a launcher surface. The helical cut of the launcher has been optimized by taking the taper angle into account. Further more, the amplitude of the surface perturbation have been optimized for improved focusing in order to reduce the diffraction losses at the helical cut. Low power measurement shows a good agreement with the design. High efficiency characteristics of the design have also been calculated on the assumption of frequency downshift due to the thermal expansion of the cavity and stepwise frequency tuning by changing the operating mode. Besides, the possibility of high efficiency launcher for higher mode is discussed, and these results give the prospect to high efficiency long pulse gyrotrons.     

Preliminary studies on a variable energy positron annihilation lifetime spectroscopy system

There are many advantages in being able to perform positron annihilation lifetime spectroscopy (PALS) using a variable energy positron beam, the most obvious being the easy identification of different defect types at different depths. The difficulty in conducting variable energy (VE) PALS studies lies in the fact that a “start” signal is required to signal the entry of the positron into the target. Two methods have been used to overcome this problem, namely the bunching technique, which employs radio frequency (RF) cavities and choppers, and secondly the use of secondary electrons emitted from the target. The latter technique is in terms of experimental complexity much simpler, but has in the past suffered from poor time resolution (typically ∼500 ps). In this work, we present a series of computer simulations of a design based on the secondary electron emission from thin C-foils in transmission mode which shows that significant improvements in time resolution can be made with resolutions ∼200 ps being in principle possible.     

UV laser induced desorption of CsI and RbI ion clusters

Experimental results of laser sputtering of cesium and rubidium iodide secondary ions are presented. A TOF mass spectrometer, operating in linear mode, continuous extraction for positive or negative ions, was used for the analysis of (CsI)_nCs⁺, (CsI)_nI⁻, (RbI)_nRb⁺ and (RbI)_nI⁻ ion emission as a function of the laser irradiance. Experimental data show that the cluster ion emission yields decrease exponentially with n, for all the laser irradiances applied. Theoretical analysis of the clusters structure was performed using density functional theory at the B3LYP/LACV3P level, for the positive and negative cluster series. A quasi-equilibrium evolution of the clusters is proposed to extract a parameter characteristic of the cluster recombination process: the effective temperature. The hypothesis of the atomic species’ recombination (during the expansion of a high density highly ionized cloud) leading to cluster formation is confirmed to some extent in a second set of experiments: the UV laser ablation of a mixed and non-mixed cesium iodide and potassium bromide targets. These experiments show that the emission yields contain contributions from both the recombination process and from the sample stoichiometry, even for high laser irradiances.     

Kinetics of polarization reversal in irradiated thin PZT films

The effect of irradiation with electrons and neutrons and of exposure to synchrotron radiation on cyclic switching of polarization in thin films of lead zirconate titanate Pb(Zr,Ti)O₃ (PZT) was studied. It is shown that variations in the shape of switching currents are due to the generation of a spatially nonuniform bound internal field with account for an increase in the rate of bulk screening caused by irradiation. A correlation between structural variations and the evolution of the switching current measured during and after irradiation is established.     

Phasing of three vircators simulated in terms of coupled van der Pol oscillators

Phase synchronization in a system of three virtual-cathode microwave oscillators (vircators) simulated by coupled van der Pol oscillators is studied. The phasing dynamics of the vircators is visualized with the phase portraits of the system in the triangular coordinates. Different phasing conditions are found.     

Theoretical photoelectronic spectra of molybdenum, tungsten, and rhenium disilicides

Photoelectronic spectra of volume samples of molybdenum, tungsten, and rhenium disilicides are theoretically investigated as functions of the excitation energy (hv = 12–1486 eV) by the method of linearized attached plane waves. The main contribution to the spectrum at low (hv = 12–52 eV) and very high (hv = 1486 eV) excitation energies is given by the metal d-states, while the contribution of the Si p-states is dominant at intermediate excitation energies. An analysis of the calculated results demonstrates that the main peak of the photoelectronic spectra is displaced by 0.2 eV toward the bottom of the valence band when going from MoSi₂ to WSi₂; it is displaced by 0.3 eV when going from WSi₂ to ReSi_1.75. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 7, pp. 75–80, July, 2006.     

New Plasmon Waveguides Composed of Twin Metal Wedges with a Nano Gap

We have numerically shown the existence of coupled wedge plasmons (CWPs) which propagates along a nano gap of a twin metal wedge. The CWPs are formed by wedge plasmons which can interact with each other. The dispersion relations of the wavenumber, propagation distance, and beam area of CWPs, are described and show that the characteristics of CWPs are similar to those of wedge plasmons and of gap plasmons. We also propose a new plasmon waveguide composed of twin metal wedges with a nano gap.     

An improved, free surface, topographic technique

Current techniques of water wave visualization such as shadowgraphy and stereo photography are widely used but are deficient in many aspects. Refraction based visualization observes the bending of light as it traverses across a liquid-air interface. This work describes the continued development of techniques to measure the surface height of a liquid free surface. The method, Reference Image Topography, utilizes refraction of light at the free surface as a function of the local angle of that surface. Particle Image Velocimetry (PIV) software is used to evaluate apparent dislocations of the target image viewed through the free surface, which are approximately proportional to the surface angle. High-resolution images are presented of the dynamic surface topography for a point source and the shallow water flow around a vertical cylinder.     

Composition and structure of low-molecular-weight products of thermal oxidative degradation of atactic polypropylene

The composition and structure of low-molecular-weight products of thermal oxidative degradation of atactic polypropylene were studied.