Topology change from quantum instability of gauge theory on fuzzy CP

Many gauge theory models on fuzzy complex projective spaces will contain a strong instability in the quantum field theory leading to topology change. This can be thought of as due to the interaction between space–time via its noncommutativity and the fields (matrices) and it is related to the perturbative UV–IR mixing. We work out in detail the example of fuzzy CP²${\mathbf{CP}}^2$ and discuss at the level of the phase diagram the quantum transitions between the 3 spaces (space–times) CP²${\mathbf{CP}}^2$, S²${\mathbf{S}}^2$ and the 0-dimensional space consisting of a single point {0}$\{0\}$.     

Recent advances in electrochemical sensors for antibiotics and their applications

The abuse of antibiotics will cause an increase of drug-resistant strains and environmental pollution,which in turn will affect human health.Therefore,it is important to develop effective detection techniques to determine the level of antibiotics contamination in various fields.Compared with traditional detection methods,electrochemical sensors have received extensive attention due to their advantages such as high sensitivity,low detection limit,and good selectivity.In this mini review,we summarized the latest developments and new trends in electrochemical sensors for antibiotics.Here,modification methods and materials of electrode are discussed.We also pay more attention to the practical applications of antibiotics electrochemical sensors in different fields.In addition,the existing problems and the future challenges ahead have been proposed.We hope that this review can provide new ideas for the development of electrochemical sensors for antibiotics in the future.     

Channelled Porous TiO2 Synthesized with a Water‐in‐Oil Microemulsion

Porous titanium dioxide synthesized with a bicontinuous surfactant template is a promising method that leads to a high active surface area electrode. The template used is based on a water/isooctane/dioctyl sodium sulfosuccinate salt together with lecithin. Several parameters were varied during the synthesis to understand and optimize channel formation mechanisms. The material is patterned in stacked conical channels, widening towards the centre of the grains. The active surface area increased by 116 % when the concentration of alkoxide precursors was decreased and increased by 241 % when the template formation temperature was decreased to 10 °C. Increasing the oil phase viscosity tends to widen the pore aperture, thus decreasing the overall active surface area. Changing the phase proportions alters the microemulsion integrity and disrupts channel formation.     

Effect of Cofactor Folate on the Growth of Corynebacterium glutamicum SYPS-062 and l-Serine Accumulation

The direct fermentative production of l-serine from sugar has attracted increasing attention. Corynebacterium glutamicum SYPS-062 can directly convert sugar to l-serine. In this study, the effects of exogenous and endogenous regulation of cofactor folate on C. glutamicum SYPS-062 growth and l-serine accumulation were investigated. For exogenous regulation, the inhibitor (sulfamethoxazole) or precursor (p-aminobenzoate) of folate biosynthesis was added to the medium, respectively. For endogenous regulation, the gene (pabAB) that encodes the key enzyme of folate biosynthesis was knocked out or overexpressed to obtain the recombinant C. glutamicum SYPS-062 ΔpabAB and SYPS-062(pJC-tac-pabAB), respectively. The results indicated that decreased levels of cofactor folate supported l-serine accumulation, whereas increased levels of cofactor folate aided in cell growth of C. glutamicum SYPS-062. Thus, this study not only elucidated the role of folate in C. glutamicum SYPS-062 growth and l-serine accumulation, but also provided a novel and convenient approach to regulate folate biosynthesis in C. glutamicum.     

Fabrication of free-standing multilayer films by using pH-responsive microgels as sacrificial layers

A facile way to prepare free-standing polyelectrolyte multilayer films of poly(sodium 4-styrenesulfonate)(PSS)/poly(diallyldimethylammonium)(PDDA) was developed by applying a new pH-dependent sacrificial system based on cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) microgels. The tertiary amine groups of PDMAEMA microgels can be protonated in acidic environment, and the protonated microgels were deposited by layer-by-layer (LbL) technique with PSS. PSS/PDDA multilayer films were constructed on the top of the PSS/microgels sacrificial layers. The LbL assembly process was investigated by UV–vis spectroscopy. Further study shows that the free-standing PSS/PDDA multilayer films can be obtained within 3 min by treating the as-prepared films in alkali aqueous solution with a pH of 12.0. The pH-triggered exfoliation of PSS/PDDA multilayer films provides a simple and facile way to prepare LbL assembled free-standing multilayer films.     

Ternary Sn-Ti-O Electrocatalyst Boosts the Stability and Energy Efficiency of CO2 Reduction

Simultaneously improving energy efficiency (EE) and material stability in electrochemical CO₂ conversion remains an unsolved challenge. Among a series of ternary Sn-Ti-O electrocatalysts, 3D ordered mesoporous (3DOM) Sn_0.3Ti_0.7O₂ achieves a trade-off between active-site exposure and structural stability, demonstrating up to 71.5 % half-cell EE over 200 hours, and a 94.5 % Faradaic efficiency for CO at an overpotential as low as 430 mV. DFT and X-ray absorption fine structure analyses reveal an electron density reconfiguration in the Sn-Ti-O system. A downshift of the orbital band center of Sn and a charge depletion of Ti collectively facilitate the dissociative adsorption of the desired intermediate COOH* for CO formation. It is also beneficial in maintaining a local alkaline environment to suppress H₂ and formate formation, and in stabilizing oxygen atoms to prolong durability. These findings provide a new strategy in materials design for efficient CO₂ conversion and beyond.     

Lattice Distortion in Hollow Multi-Shelled Structures for Efficient Visible-Light CO2 Reduction with a SnS2/SnO2 Junction

Precise control of the micro-/nanostructures of nanomaterials, such as hollow multi-shelled structures (HoMSs), has shown its great advantages in various applications. Now, the crystal structure of building blocks of HoMSs are controlled by introducing the lattice distortion in HoMSs, for the first time. The lattice distortion located at the nanoscale interface of SnS₂/SnO₂ can provide additional active sites, which not only provide the catalytic activity under visible light but also improve the separation of photoexcited electron–hole pairs. Combined with the efficient light utilization, the natural advantage of HoMSs, a record catalytic activity was achieved in solid–gas system for CO₂ reduction, with an excellent stability and 100 % CO selectivity without using any sensitizers or noble metals.     

A Hydrolytically Stable Vanadium(IV) Metal–Organic Framework with Photocatalytic Bacteriostatic Activity for Autonomous Indoor Humidity Control

Metal–organic frameworks (MOFs) with long-term stability and reversible high water uptake properties can be ideal candidates for water harvesting and indoor humidity control. Now, a mesoporous and highly stable MOF, BIT-66 is presented that has indoor humidity control capability and a photocatalytic bacteriostatic effect. BIT-66 (V₃(O)₃(H₂O)(BTB)₂), possesses prominent moisture tunability in the range of 45–60 % RH and a water uptake and working capacity of 71 and 55 wt %, respectively, showing good recyclability and excellent performance in water adsorption–desorption cycles. Importantly, this MOF demonstrates a unique photocatalytic bacteriostatic behavior under visible light, which can effectively ameliorate the bacteria and/or mold breeding problem in water adsorbing materials.     

Short-focus nematic liquid crystal microlens array with a dielectric layer

ABSTRACT

A short-focus microlens array using dielectric layer and inhomogeneous electric field over a homogeneous nematic liquid crystal (LC) layer is proposed. The top substrate has a planar indium tin oxide (ITO) electrode which is coated on the inner surface. The bottom substrate has strip ITO electrodes which are embedded in the dielectric layers. The inhomogeneous electric field generates a required gradient refractive index profile within the LC layer which, in turn, causes the focusing effect. Due to the thinner LC layer (15 μm), the spherical aberration should be negligible. Moreover, the fabrication process of the proposed microlens array can be easily carried out because of the layer-by-layer configuration. The simulation results show that the focal length of the LC microlens can be continuously tuned from infinity to 0.988 mm with the change of applied voltage.     

聚吡咯及其纳米复合材料在光热治疗领域的应用

光热治疗是近年来兴起的一种治疗方法,具有靶向性强、适应性广的特点。在光热治疗中,通过光热剂对光的吸收将光能转化为热能,从而实现治疗作用,因而光热剂的光热转化性能直接决定了光热治疗的效果。光热剂的种类丰富,涵盖由无机到有机等组成和性能各异的多种材料。其中,聚吡咯具备良好的生物相容性、优异的光稳定性以及光热转化性能,在光热治疗领域受到广泛关注,是一种拥有巨大应用潜力的光热剂,然而其在光热治疗领域的发展趋势及前景却鲜有报道。本文综述了聚吡咯及其纳米复合材料的制备方法,详述了聚吡咯及其纳米复合材料在光热治疗领域中的应用情况,包括聚吡咯基纳米材料的自身性能和实际光热治疗的效果,指出以聚吡咯为基体或修饰材料来制备具有CT、磁共振、光声显影及光热治疗性能的聚吡咯基复合材料已成为发展趋势。在此基础上,本文还总结了聚吡咯基纳米复合材料在制备和应用中存在的问题,并分析了其在发展过程中遇到的挑战以及在生物医学应用中的前景。