Ba2Cd(B3O6)2: A Congruent‐Melting Compound with Isolated B3O6 Units

The single crystals of Ba₂Cd(B₃O₆)₂ were grown by the spontaneous crystallization method for the first time. They crystallize in the centrosymmetric trigonal space group R$\bar{3}$ with a = 7.143(3) Å, c = 17.405(16) Å, and Z = 3. The structure is characterized by isolated B₃O₆ units, and the Ba²⁺ and Cd²⁺ cations connect with B₃O₆ rings to form three dimensional structure. The TG/DSC and XRD results reveal that Ba₂Cd(B₃O₆)₂ melts congruently. First‐principles electronic structure calculation performed with the density functional theory (DFT) method shows that the calculated bandgaps are 4.66 eV, which is in good agreement with the UV/Vis/NIR experimental value 4.59 eV. The calculation shows that the Ba₂Cd(B₃O₆)₂ crystal has a large birefringence (Δn = 0.0875–0.0569 from 270 nm to 2600 nm), which demonstrates that Ba₂Cd(B₃O₆)₂ is a potential birefringence crystal.     

Effect of partial crosslinking on morphology and properties of the poly(β-hydroxybutyrate)/poly(d,l-lactic acid) blends

Poly(β-hydroxybutyrate) (PHB) is a bio-based and biodegradable aliphatic polyester, however its application is limited by some disadvantages such as high price, brittleness, poor processability and low melt-strength due to serious thermal degradation. Partial crosslinking initiated by dicumyl peroxide (DCP) was applied in this work to improve the performance of poly(β-hydroxybutyrate)/poly(d,l-lactic acid) (PHB/PDLLA) blends. The partial crosslinking of the blends and its effect on the properties, morphology, rheology and thermal behavior of the blends were investigated. The tensile strength and impact toughness of the PHB were increased by incorporation of the PDLLA, which were improved further after the partial crosslinking because of an increased compatibility between the PHB and the PDLLA phases. The rheological study revealed that the storage modulus (G′) and complex viscosity (η*) of the blends were increased after addition of the DCP. On the other hand, the crystallization of PHB in the blends was restricted to a certain extent by the formation of partially crosslinked network while its crystal form was not modified.     

Identification of two polyamides (PA11 and PA1012) using pyrolysis-GC/MS and MALDI-TOF MS

The main goal of this work is to identify two polyamides (PA11 and PA1012) by mass spectrometry including pyrolysis-GC/MS and MALDI-TOF MS. PA11 and PA1012 have similar properties and cannot be distinguished by many other methods. Using pyrolysis-GC/MS, the pyrograms of PA11 and PA1012 at 600 °C were compared. Specific pyrolyzates for PA11 and PA1012 were obtained, 2-azacyclotridecanone for PA11 and 1,10-diaminodecane, 1,10-dicyanodecane for PA1012, respectively, which was the basis to distinguish them. Meanwhile, MALDI-TOF MS can give specific repeat unit for these two polyamides, dehydrated 11-aminoundecanoic acid (M = 183) for PA11, acetylate of dodecanedioic acid and diaminodecane (M = 366) for PA1012, which can be another means of identifying them.     

Determination of micro‐RNA in cardiomyoblast cells using CE with LIF detection

Micro‐RNAs (miRNAs) are small, endogenous, singlestranded, and noncoding RNAs. The miRNAs have been found to perform important functions in many cellular processes, such as development, proliferation, differentiation, and apoptosis. Circulating miRNAs have been proposed as emerging biomarkers in diseases such as cancer, diabetes, and cardiovascular disease including acute myocardial infarction (AMI). In this study, we developed CE with LIF (CE‐LIF) using fluorescence‐labeled DNA probe for determination of low abundance miRNA in cell extracts. The target miRNA is miRNA‐499, a biomarker candidate of AMI with low abundance in biological samples. In order to measure the trace level of miRNA, we optimized the hybridization conditions such as hybridization time, temperature, and buffer solution. The highest fluorescence intensity of the hybridized miRNA‐499 was found when hybridization was conducted at 40°C in 50 mM Tris‐acetate (pH 8.0) buffer containing 50 mM NaCl, and 10 mM EDTA for 15 min. The hybridized miRNA‐499 was detected in cultured H9c2 cardiomyoblast cells and the analysis of miRNA‐499 was completed within 1 h using CE‐LIF. These results showed the potential of CE for fast, specific, and sensitive high‐throughput analysis of low‐abundance miRNAs in cell extracts, biofluids, and tissues.     

TargetATPsite: A template‐free method for ATP‐binding sites prediction with residue evolution image sparse representation and classifier ensemble

Understanding the interactions between proteins and ligands is critical for protein function annotations and drug discovery. We report a new sequence‐based template‐free predictor (TargetATPsite) to identify the Adenosine‐5′‐triphosphate (ATP) binding sites with machine‐learning approaches. Two steps are implemented in TargetATPsite: binding residues and pockets predictions, respectively. To predict the binding residues, a novel image sparse representation technique is proposed to encode residue evolution information treated as the input features. An ensemble classifier constructed based on support vector machines (SVM) from multiple random under‐samplings is used as the prediction model, which is effective for dealing with imbalance phenomenon between the positive and negative training samples. Compared with the existing ATP‐specific sequence‐based predictors, TargetATPsite is featured by the second step of possessing the capability of further identifying the binding pockets from the predicted binding residues through a spatial clustering algorithm. Experimental results on three benchmark datasets demonstrate the efficacy of TargetATPsite. © 2013 Wiley Periodicals, Inc.     

Investigation on the Stability of the Dispersion System of Cross-Linked Polyacrylamide Microspheres

The salt resistance, temperature resistance, and shear stability of a cross-linked polyacrylamide microsphere system are studied by microfiltration, light diffraction analysis, and optical microscopy. The results show that other conditions being equal, the particle diameter of cross-linked polyacrylamide microspheres decreases with increased NaCl concentration. When NaCl concentration is lower than 10,000 mg/L, its effect on the plugging performance of a cross-linked polyacrylamide microsphere system in regard to the nuclear pore membrane is weak in comparison with a linked polymer solution, but the former system has better salt tolerance. Particle diameter decreases with increased swelling temperature. When the swelling temperature is below 90°C, its effect on the plugging performance of the cross-linked polyacrylamide microsphere system in regard to nuclear pore membrane is weak in comparison with the linked polymer solution, but has better temperature tolerance. Particle size shows little change, with shearing rate being increased, while the shape remains about the same and the effect of shearing on the plugging performance of the cross-linked polyacrylamide microsphere dispersion system in regard to the nuclear pore membrane is weak in comparison with the linked polymer solution, but has better shear stability. The salt tolerance, temperature tolerance, and shear stability of microspheres are associated with a particular cross-linked structure.     

pH-Sensitive Dye-Polyether Derivatives as Dispersants for Its Parent Dye. Part 1: Synthesis and Hydrolysis Behavior

A series of dye-polyether derivatives, supposedly to be used as dispersants for parent dye, were synthesized by grafting poly(oxyalkylene)-amines based on differing both molecular weights and degrees of hydrophilicity/hydrophobicity, onto C.I. disperse red 60 via a stable urea linkage. The structures of the dye-polyether derivatives were characterized by FTIR, ¹H NMR, and SEC. The influence of pH on the hydrolysis behaviors of the dye-polyether derivatives were studied in buffered aqueous solutions within the pH range of 4 to 10. The hydrolysis of dye-polyether derivatives was pH dependent and relatively faster in mild alkaline buffer solution than in acidic one. The influence of poly(oxyalkylene)-amine structure on the hydrolysis behavior was also investigated; it was found that the hydrolysis rate is affected little by the molecular weight and increases with the increasing hydrophilicity of the poly(oxyalkylene)-amine.     

Synthesis and Characterization of Mesoporous Silica Templated by Amphiphilic RTILs

This article reports a novel preparation of mesoporous silica with series of 1-alky-3-methylimidazolium bromide (C_nMIM)Br (n = 12, 14, 16), a kind of amphiphilic room-temperature ionic liquids (RTILs), as a template via a sol-gel nanocasting technique. The pore morphology and structures of these mesoporous silica were characterized by Transmission electron microscopy (TEM). The results show that the RTIL bearing longer alkyl chain is preferred to form the mesoporous silica material with bigger pores. (C₁₆MIM)Br has been chosen to study how the various influencing factors affect the synthesis and structure of the mesoporous silica material, such as the acid concentration, the solling time, the gelling time and the calcination time. N₂ adsorption-desorption isotherms measurement was used to characterize the pore size distribution and BET surface area. The results indicate that all of the factors can make an influence on the preparation of the mesoporous silica, which is more sensitive to the concentration of the acid.     

SAPO-11分子筛晶化过程研究

采用X射线衍射、X射线荧光光谱、扫描电镜和固体核磁等方法研究了SAPO-11分子筛的水热晶化过程.结果表明,晶化初期,SAPO-11和一种具有磷硅铝组成的未知晶相同时生成;随着晶化的进行,中间相溶解,SAPO-11的生成速率大大增加,呈现快速晶化的特征;至2.33h后,SAPO-11的结晶度接近100%,并保持至晶化结束.硅从晶化初期即参与了SAPO-11的形成,它在晶体中的含量随晶化时间的延长而逐渐增加.硅原子主要以硅岛的形式分布于SAPO-11分子筛骨架中,从而导致多种硅配位环境的存在.分析显示,SAPO-11分子筛呈现外表面富硅的特点,结合晶化过程的分析可推测,硅在SAPO-11分子筛晶体中的分布不均匀,其含量从内向外递增.     

Investigation on sound absorption properties of kapok fibers

Sound absorption properties of natural kapok fibers have been investigated. Kapok fibrous assemblies with different bulk density, thickness, fiber length and orientation were manufactured, and their acoustical performances were evaluated by using an impedance tube instrument. Results show that the kapok fiber has excellent acoustical damping performance due to its natural hollow structure, and the sound absorption coefficients of kapok fibrous assemblies are significantly affected by the bulk density, thickness and arrangement of kapok fibers but less dependent on the fiber length. Compared with assemblies of commercial glass wool and degreasing cotton fibers, the kapok fiber assemblies with the same thickness but much smaller bulk density may have the similar sound absorption coefficients. Theoretical modelling of the acoustical damping performance of kapok fibers shows a good agreement with the experimental data. All the results demonstrate that kapok fiber is a promising light and environment-friendly sound absorption material.