Quantitative analysis of 23-hydroxybetulinic acid in mouse plasma using electrospray liquid chromatography/mass spectrometry

23-Hydroxybetulinic acid is a newly isolated derivative of betulinic acid. The agent exhibits potential anti-tumor activity and functions in this regard via apoptosis. In support of pharmacokinetic and toxicological evaluations, a new assay based on liquid chromatography/mass spectrometry (LC/MS) was developed for the quantitative analysis of 23-hydroxybetulinic acid. Sample preparation consisted of extraction of the plasma by the addition of methylene chloride followed by centrifugation. Aliquots of the supernatant were analyzed using an isocratic reversed-phase high-performance liquid chromatography (HPLC) system coupled to a negative ion electrospray mass spectrometer. Molecules of 23-hydroxybetulinic acid and the internal standard limonin were detected using selected ion monitoring at m/z 471 and 469, respectively. The limit of detection of 23-hydroxybetulinic acid was 0.05 pg (0.11 fmol) injected on-column (10 pg/mL, 5 microL injection volume), and the limit of quantitation was 10 pg (21.19 fmol, 2 ng/mL, 5 muL injection volume). 23-Hydroxybetulinic acid was stable in plasma samples at -20 degrees C for at least 3 weeks. The intra-day and inter-day coefficients of variation of the assay were 3.0 and 4.8%, respectively. The utility of the assay was demonstrated by measuring 23-hydroxybetulinicacid in mouse plasma following intragastric administration (IG) in vivo. Pharmacokinetic parameters were calculated using the 3P97 pharmacokinetic software package. A two-compartment, first-order model was selected for pharmacokinetic modeling. The result showed that after IG of 200 mg/kg 23-hydroxybetulinic acid, the plasma concentrations reached peaks at 2 h with C(max) of 3.1 microg/mL. The 200 mg/kg 23-hydroxybetulinic acid suspension IG doses were found to have long elimination half-lives of 25.6 h and low bioavailability of 2.3%. No interference was noted due to endogenous substances. These analytical methods should be of value in future studies related to the development and characterization of 23-hydroxybetulinic acid.     

同多酸和杂多酸修饰微电极的电化学研究 Ⅶ.磷钒钼杂多酸薄膜修饰微电极和杂多酸/聚苯胺薄膜修饰微电极的制备和电化学性质

本文详细描述了磷钒钼杂多酸（PV2Mo10）极薄膜修饰碳纤维（CF）微电极和PV2Mo10／聚苯胶（PAn）薄膜修饰微电极的制备及其电化学性质。     

乙醇和甲苯组成的最低共沸混合物热力学性质的研究

The molar heat capacity of the azeotropic mixture composed of ethanol and toluene was measured by a high precision adiabatic calorimeter from 80 to 320 K. The glass transition and phase transitions of the azeotropic mixture were determined based on the heat capacity measurements. A glass transition at 103.350 K was found. A solid-solid phase transition at 127.282 K, two solid-liquid phase transitions at 153.612 and 160.584 K were observed, which correspond to the transition of metastable crystal to stable crystal of ethanol and the melting of ethanol and toluene, respectively. The thermodynamic functions and the excess ones of the mixture relative to the standard temperature 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.     

A serpentine laminating micromixer combining splitting/recombination and advection

Mixing enhancement has drawn great attention from designers of micromixers, since the flow in a microchannel is usually characterized by a low Reynolds number (Re) which makes the mixing quite a difficult task to accomplish. In this paper, a novel integrated efficient micromixer named serpentine laminating micromixer (SLM) has been designed, simulated, fabricated and fully characterized. In the SLM, a high level of efficient mixing can be achieved by combining two general chaotic mixing mechanisms: splitting/recombination and chaotic advection. The splitting and recombination (in other terms, lamination) mechanism is obtained by the successive arrangement of "F"-shape mixing units in two layers. The advection is induced by the overall three-dimensional serpentine path of the microchannel. The SLM was realized by SU-8 photolithography, nickel electroplating, injection molding and thermal bonding. Mixing performance of the SLM was fully characterized numerically and experimentally. The numerical mixing simulations show that the advection acts favorably to realize the ideal vertical lamination of fluid flow. The mixing experiments based on an average mixing color intensity change of phenolphthalein show a high level of mixing performance was obtained with the SLM. Numerical and experimental results confirm that efficient mixing is successfully achieved from the SLM over the wide range of Re. Due to the simple and mass producible geometry of the efficient micromixer, SLM proposed in this study, the SLM can be easily applied to integrated microfluidic systems, such as micro-total-analysis-systems or lab-on-a-chip systems.     

Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

Two-photon Dissociation Study of Carbon Disulfide in Acetonitrile at 266 nm

Using laser flash photolysis/transient absorption technique for the study of two photon photodissociation of carbon disulfide in acetonitrile solution at 266 nm, the transient UV-Vis absorption spectrum of Rydberg state CS2 （6sσg） within 240-370 nm and subsequent dissociation product CS （α^3П） with the maximum absorption at 260 nm were directly observed. The lifetime of CS （α^3П） in the nitrogen and oxygen saturated solution is also studied in our experiment.     

A New Approach to α—Bromochalcones

α-Bromo benzolymethylene triphenylphosphorane 3 has been synthesized by the reaction of benzoylmethylene triphenylphosphorane 1 with N-bromosuccinimide in the yield of 87% and can react with aromatic aldehydes 4 to give α-bromochalcones 5 in good yields.     

Application of artificial neural networks in multivariable optimization of an on-line microwave FIA system for catalytic kinetic determination of iridium(III)

A new rapid, selective and sensitive on-line microwave flow injection-kinetic method was developed for spectrophotometric determination of micro amounts of Ir(III), based on its catalytic effect on the m-acetylchlorophosphonazo (CPA-mA) and KIO(4) reaction in NaOH media. An on-line microwave oven was employed to accelerate the reaction. The reaction was followed spectrophotometrically by measuring the decrease of the absorbance of CPA-mA at 580 nm. The effect of five variables for the determination of Ir(III) was optimized by means of a multilayer artificial neural network using extended delta-bar-delta (EDBD) algorithms. Under the optimum experimental conditions, Ir(III) could be determined in the range 0.060-0.60 micro gZZZ;mL(-1) with detection limit of 0.02 micro gZZZ;mL(-1) and the sampling frequency of 34 h(-1). The proposed method was applied to the determination of micro amounts of Ir(III) in refined ore and secondary alloy with the recoveries from 91.4% to 109%.     

GMA熔融接枝EPDM的研究

以甲基丙烯酸缩水甘油酯（ＧＭＡ）为接枝单体，过氧化二异丙苯（ＤＣＰ）为引发剂，对三元乙丙胶（ＥＰＤＭ）进行了熔融接枝，在烃链上引入极性基团，以改善ＥＰＤＭ与极性聚合物的相容性。用差示扫描量热计（ＤＳＣ）研究了ＧＭＡ的聚合温度，用富里叶红外（ＦＴ－ＩＲ）、凝胶渗透色谱（ＧＰＣ）对接枝产物进行了表征。实验结果表明，产物的接枝率和凝胶量可以通过反应条件（温度、时间、反应物组成及加料方式）来控制。