杯芳烃的配位化学──Ⅳ.对叔丁基杯[8]芳烃与钙、镉配合物的合成与表征

本文合成了对叔丁基杯[8]芳烃(H₈L)与钙、镉的固体配合物。并以元素分析、核磁共振、热谱、红外谱、紫外谱等进行表征。其配合物的组成分别为Ca(H₆L)·6dmf及Cd(H₆L)·6dmf.     

Nonequilibrium Monte Carlo simulation of lattice block copolymer chains subject to oscillatory shear flow

This paper has extended nonequilibrium Monte Carlo (MC) approach to simulate oscillatory shear flow in a lattice block copolymer system. Phase transition and associated rheological behaviors of multiple self-avoiding chains have been investigated. Stress tensor has been obtained based upon sampled configuration distribution functions. At low temperatures, micellar structures have been observed and the underlying frequency-dependent rheological properties exhibit different initial slopes. The simulation outputs are consistent with the experimental observations in literature. Chain deformation during oscillatory shear flow has also been revealed. Although MC simulation cannot account for hydrodynamic interaction, the highlight of our simulation approach is that it can, at small computing cost, investigate polymer chains simultaneously at different spatial scales, i.e., macroscopic rheological behaviors, mesoscopic self-assembled structures, and microscopic chain configurations.     

混合模式硅胶基质毛细管电色谱整体柱的制备及其电色谱性能研究

采用温和条件下的溶胶-凝胶技术,成功制备了阴离子交换-反相混合模式硅胶基质毛细管电色谱整体柱.通过调整反应液中不同前体的比例,优化了整体柱的制备条件.通过扫瞄电镜,对柱床进行了表征和分析.实验发现,所制备的整体柱电渗流的方向和大小可随流动相pH值的改变而改变,在酸性和中性条件下,具有从阴极流向阳极的电渗流;当流动相pH值升至约7.5时,电渗流方向发生了反转(由阳极流向阴极).在优化的实验条件下,用所制备的整体柱对所考察的酸性(中性)化合物实现了快速分离,并获得了高达160,000 N/m的柱效.     

氢化物－气相色谱的元素光度检测器

研究开发的一种新型的元素光度检测器主要用于锗、砷、锡和锑的氢化物气相色谱检测，具有高灵敏，高选择性。它是在普通火焰光度检测器的基础上加装了特制的滤光片改制而成的。对锗、砷、锡和锑的检测限分别为３．０×１０￣（－１１）ｇ、７．０×１０￣（－１１）ｇ、７．０×１０￣（－１０）ｇ和１．１×１０￣（－８）ｇ，相对标准偏差分别为１．８％、２．４％、２．６％和３．０％。     

A heterogeneous model for gas transport in carbon molecular sieves

A dual resistance model with distribution of either barrier or pore diffusional activation energy is proposed in this work for gas transport in carbon molecular sieve (CMS) micropores. This is a novel approach in which the equilibrium is homogeneous, but the kinetics is heterogeneous. The model seems to provide a possible explanation for the concentration dependence of the thermodynamically corrected barrier and pore diffusion coefficients observed in previous studies from this laboratory on gas diffusion in CMS. The energy distribution is assumed to follow the gamma distribution function. It is shown that the energy distribution model can fully capture the behavior described by the empirical model established in earlier studies to account for the concentration dependence of thermodynamically corrected barrier and pore diffusion coefficients. A methodology is proposed for extracting energy distribution parameters, and it is further shown that the extracted energy distribution parameters can effectively predict integral uptake and column breakthrough profiles over a wide range of operating pressures.     

Mechanism of the glutathione transferase-catalyzed conversion of antitumor 2-crotonyloxymethyl-2-cycloalkenones to GSH adducts

Human glutathione (GSH) transferase (hGSTP1-1) processes with similar kinetic efficiencies the antitumor agents 2-crotonyloxymethyl-2-cyclohexenone (COMC-6), 2-crotonyloxymethyl-2-cycloheptenone (COMC-7), and 2-crotonyloxymethyl-2-cyclopentenone (COMC-5) to 2-glutathionylmethyl-2-cyclohexenone, 2-glutathionylmethyl-3-glutathionyl-2-cycloheptenone, and 2-glutathionylmethyl-2-cyclopentenone, respectively. This process likely involves initial enzyme-catalyzed Michael addition of GSH to the COMC derivative to give a glutathionylated enol(ate), which undergoes nonstereospecific ketonization, either while bound to the active site or free in solution, to a glutathionylated exocyclic enone. Free in solution, GSH reacts at the exomethylene carbon of the exocyclic enone, displacing the first GSH to give the final product. This mechanism is supported by the observation of multiphasic kinetics in the presence of high concentrations of hGSTP1-1 and the ability to trap kinetically competent exocyclic enones in aqueous acid using COMC-6 and COMC-7 as substrates. That the exocyclic enone is formed by nonstereospecific ketonization of an enol(ate) species is indicated by the observation that COMC-6 (chirally labeled with deuterium at the exomethylene carbon) gives stereorandomly labeled exocyclic enone. The isozymes hGSTP1-1, hGSTA1-1, hGSTA4-4, and hGSTM2-2 catalyze the conversion of COMC-6 to final product with similar efficiencies (K(m) = 0.08-0.34 mM, k(cat) = 1.5-6.1 s(-)(1)); no activity was detected with the rat rGSTT2-2 isozyme. Molecular docking studies indicate that in hGSTP1-1, the hydroxyl group of Tyr108 might serve as a general acid catalyst during substrate turnover. The possible significance of these observations with respect to the metabolism of COMC derivatives in multidrug resistant tumors is discussed.     

Improved hygrothermal durability of flax/polypropylene composites after chemical treatments through a hybrid approach

There are growing research interests in flax fibers due to their renewable ‘green’ origin and high strength. However, these natural fibers easily absorb moisture and have poor adhesion with polymer matrix leading to low interfacial strength for the composites. A hybrid chemical treatment technique combining alkali (sodium hydroxide) and silane treatments is adopted in the current study to modify flax fibers for improved performances of flax/polypropylene composites. Changes in chemical composition, microstructure, wettability, surface morphology, crystallinity and tensile properties of single flax fiber before and after chemical treatments were comprehensively characterized using techniques including SEM, FTIR, AFM, XRD, micro-fiber tester, etc. It was found that hemicellulose and lignin at the fiber surface were removed due to alkali treatment, which helped to reduce moisture absorption of the composites. Alkali-treated flax fibers were later subjected to silane treatment, which helped to improve the compatibility between flax fiber and polypropylene matrix. After alkali-silane hybrid chemical treatment, moisture absorption of the composites was further decreased. At the same time, the interfacial bonding strength between flax and polypropylene is significantly enhanced. All these results validate the great advantage of the hybrid chemical treatment approach for flax/polypropylene composites, which has the potential to promote the application of chemical treatment techniques in the plant fiber composite industry.

Graphic abstract

     

毛细管电色谱中双电层叠加的研究

通过流动相中电解质浓度对毛细管电色谱柱效能的流动相平均线速度的影响，研究了ＣＥＣ中双电层叠加现象。提出选择合适电解质组成的浓度及在制备色谱柱过程中避免细小和破碎的固定相颗粒进入柱中，以有效地减小双电层叠加作用。     

Assembled dendritic titanium catalysts for enantioselective hetero-Diels-Alder reaction of aldehydes with Danishefsky's diene

A new type of dendritic 2-amino-2'-hydroxy-1,1'-binaphthyl (NOBIN)-derived Schiff-base ligands have been synthesized and applied to the titanium-catalyzed hetero-Diels-Alder reaction of Danishefsky's diene with aldehydes. These reactions afforded the corresponding 2-substituted 2,3-dihydro-4H-pyran-4-ones in quantitative yields and with excellent enantioselectivities (up to 97.2 % ee). The disposition of the dendritic wedges and the dendron size in the ligands were found to have significant impact on the enantioselectivity of the reaction. The recovered dendritic catalyst could be reused without further addition of the Ti source or a carboxylic acid additive for at least three cycles, retaining similar activity and enantioselectivity. The high stability of this type of assembled dendritic titanium catalyst may be attributed to the stabilization effect of large-sized dendron units in the catalyst molecule. The other important phenomenon observed with this catalyst system is that a higher degree of asymmetric amplification has been achieved by attachment of the dendron unit to the chiral ligand, which represents a new advantage of dendrimer catalysts for asymmetric reactions using chiral ligands of lower optical purity.