Spin-transfer switching in MgO magnetic tunnel junction nanostructures

Spin-transfer driven switching was observed in MgO based magnetic tunnelling junctions (MTJ) with tunnelling magnetoresistance ratio of up to 160% and the average intrinsic switching current density (J_c0) down to 2 MA/cm², which are the best known results reported in spin-transfer switched MTJ nanostructures. Based on a comparison of results both from MgO and AlO_x MTJs, further switching current decrease via MgO dual structures with two pinned layers is discussed.     

The Response of Debris-Flow Events to Solar Proton Flares （Ⅰ）

By analyzing the observation data from Dongchuan Debris Flow Observation and Research Station and historical data from year 1965 to 1990 gotten from National Astronomical Ob-servatories/Yunnan Observatory,the responding of debris flow in Jiangjia Ravine to Solar Proton Flare is studied. The following conclusion can be drawn. Solar Proton Flare,as one of most im-portant astronomical factors,affects the activity of debris flow in Yunnan. Generally,from 1965 to1990,the more active Solar Pro-ton Flare is,the greater the probability of high frequency and large runoff of debris flow is. On the contrary,the less active Solar Pro-ton Flare is,the greater the probability of low frequency,small runoff,and low sediment transport of debris flow is.     

森林发展系统的一个非线性半离散模型

本文建立了森林发展系统的一类非线性林龄面积结构的半离散模型 ,并讨论了半离散系统解的存在唯一性 ,给出了线性半离散系统稳定的一些充分条件     

Interior point cutting plane method for optimal power flow

In this paper, an interior point cutting plane method (IPCPM)is applied to solve optimal power flow (OPF) problems. Comparedwith the simplex cutting plane method (SCPM), the IPCPM is simpler,and efficient because of its polynomial-time characteristic.Issues in implementing IPCPM for OPF problems are addressed,including (1) how to generate cutting planes without using thesimplex tableau, (2) how to identify the basis variables inIPCPM, and (3) how to generate mixed integer cutting planes.The calculation speed of the proposed algorithm is further enhancedby utilizing the sparsity features of the OPF formulation. Numericalsimulations on IEEE 14-300-bus test systems have shown thatthe proposed method is effective.     

神光Ⅱ上柱形黑腔辐射驱动冲击波

利用神光Ⅱ的八路三倍频激光装置，驱动柱形黑腔产生的x 射线作辐射源驱动台阶铝样品产生冲击波，获得了清晰的冲击波图像，通过冲击波过台阶样 品的时间差获得冲击波速度和压力分别为31.2km/s和17.5×10⁵MPa.采用软x射线能谱 仪通过激光注入孔测量的辐射温度与采用冲击波法测量辐射温度的结果一致. 关键词： 冲击波 辐射驱动 辐射温度     

质子化丙酮分子团簇的结构和振动光谱

用密度泛函B3LYP/ 6 3 1G(d)方法 ,对质子化丙酮分子团簇 (CH3COCH3) nH+ (n =1～ 7)弱相互作用体系进行了全自由度能量梯度优化 ,得到了该系列团簇的稳定结构及其对应的体系能量 .通过对构型的分析得出了质子化丙酮分子团簇 (CH3COCH3) nH+ (n =1～ 7)的生长规律 .计算了中性丙酮分子团簇体系的质子亲合能并总结出其变化趋势 .分析讨论了质子化团簇的红外振动光谱 ,发现质子化团簇的振动光谱普遍较中性环型团簇的振动光谱复杂 ,最强的振动峰来源于质子在溶剂壳中两个氧原子之间的振动 ,而且随着团簇尺寸的增加羰基的伸缩振动峰的数目也随之增多     

A new regioselective synthesis and bioactivity of 1H‐pyrazolo[3,4‐d]pyrimidin‐4(5H)‐one derivatives

A series of new 1H‐pyrazolo[3,4‐d]pyrimidin‐4(5H)‐one Derivatives 5 has been designed and regio‐selectively synthesized via a tandem aza‐Wittig reaction. The structures of all compounds prepared have been confirmed by ¹H NMR, IR, EI‐MS spectroscopy and elemental analyses. The results of preliminary bioassay indicate that most compounds 5 possess an inhibition effect against Botrytis cinereapers and Pyricularia oryzae at the concentration of 50 mg/L.     

筒型基础系缆平台沉／拔过程侧摩阻力原型测试

介绍了1999年首次安装在渤海锦州9－3地区多筒基础平台安装施工过程中的侧摩阻力原型测试研究，描述了简型基础上沉和上拔过程中筒壁侧摩阻力的测试系统和测试方法，给出了主要测试结果并与现行规范进行了对比分析，这项成果对筒型基础平台的设计和施工具有直接的参考意义。     

微波辐射合成7-羟基-4-甲基香豆素

以浓硫酸为催化剂，采用微波辐射技术，由间苯二酚与乙酰乙酸乙酯缩合制备7－羟基－4－4甲基香豆素。结果表明，微波辐射合成7－羟基－4－4甲基香豆素的最以应条件为：间苯二酚5.5g，乙酰乙酸乙酯6.8ml，浓硫酸1.5ml，微波功率240W，微波辐射时间6min，产率84．1％，不采用微波辐射，反应时间大于10h，产率78％，红外光谱分析表明，7－羟基－4－4甲基香豆素的特征峰与7－羟基－4－甲基香豆素的各官能团的吸收峰吻合，测定7－羟基－4－甲基香豆素的熔点为189－192℃。     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007