The Theoretical and Experimental Investigation of the Fluorinated Palladium β-Diketonate Derivatives: Structure and Physicochemical Properties

To search for new suitable Pd precursors for MOCVD/ALD processes, the extended series of fluorinated palladium complexes [Pd(CH₃CXCHCO(R))₂] with β-diketone [tfa−1,1,1-trifluoro-2,4-pentanedionato (1); pfpa−5,5,6,6,6-pentafluoro-2,4-hexanedionato (3); hfba−5,5,6,6,7,7,7-heptafluoro-2,4-heptanedionato (5)] and β-iminoketone [i-tfa−1,1,1-trifluoro-2-imino-4-pentanonato (2); i-pfpa−5,5,6,6,6-pentafluoro-2-imino-4-hexanonato (4); i-hfba-5,5,6,6,7,7,7-heptafluoro-2-imino-4-heptanonato (6)] ligands were synthesized with 70–80% yields and characterized by a set of experimental (SXRD, XRD, IR, NMR spectroscopy, TG) and theoretical (DFT, Hirshfeld surface analysis) methods. Solutions of Pd β-diketonates contained both cis and trans isomers, while only trans isomers were detected in the solutions of Pd β-iminoketonates. The molecules 2–6 and new polymorphs of complexes 3 and 5 were arranged preferentially in stacks, and the distance between molecules in the stack generally increased with elongation of the fluorine chain in ligands. The H…F contacts were the main ones involved in the formation of packages of molecules 1–2, and C…F, F…F, NH…F contacts appeared in the structures of complexes 4–6. The stability of complexes and their polymorphs in the crystal phases were estimated from DFT calculations. The TG data showed that the volatility differences between Pd β-iminoketonates and Pd β-diketonates were minimized with the elongation of the fluorine chain in the ligands.     

Energy filtered transmission electron microscopy for the physico-chemical characterization of aquatic submicron colloids

A combination of energy filtered transmission electron microscopic (EF-TEM) procedures is proposed for the non-perturbing physico-chemical characterization of submicron mineral and organic colloids in aquatic systems. Synthetic hematite microparticles and xanthan polysaccharides were used as well-characterized model colloids in order to determine the optimum EF-TEM analysis conditions. In this paper, it is demonstrated that (i) our model colloids are morphologically representative of naturally occurring mineral/organic associations, (ii) EF-TEM allows the detection of fine xanthan ultrastructures without artefacts of conventional staining methods and (iii) submicron hematite particles can be specifically visualized and spectrometrically measured by EF-TEM within a hematite/xanthan mixture. This EF-TEM procedure appears to be appropriate for the characterization of real aquatic samples.     

Dependence of calibration sensitivity of a polysulfone/Ru(II)-tris(4,7-diphenyl-1,10-phenanthroline)-based oxygen optical sensor on its structural parameters

The optimum performance of an optical oxygen sensor based on polysulfone (PSF)/[Ru(II)-Tris(4,7-diphenyl-1,10-phenanthroline)] octylsulfonate (Ru(dpp)OS) was checked by carefully tuning the parameters affecting the membrane preparation. In particular, membranes having thickness ranging between 0.2 and 8.0 μm with various luminophore concentrations were prepared by dip-coating and tested. The membrane thickness was controlled by tuning the solution viscosity, and was measured both by secondary ion mass spectrometry (SIMS) and by visible spectroscopy (Vis). Luminescence-quenching-based calibration was a single value of the Stern-Volmer constant (K^′SV) for membranes containing up to 20 mmol Ru(dpp) g⁻¹ PSF (1.35 μm average thickness). The K^′SV value decreased for larger concentration. The highest sensitivity was obtained with membrane thickness around 1.6 μm, having a response time close to 1 s. Thicker membranes exhibited an emission saturation effect and were characterized by longer response time. The K^′SV behavior was interpreted on the basis of a mathematical approach accounting for the contribution of luminescence lifetime (τ₀), oxygen diffusion coefficient (DO₂) and oxygen solubility inside the membrane (sO₂) establishing the role of all of them and allowing their experimental determination. Moreover, a simple experimental way to estimate K^′SV without needing calibration was proposed. It was based either on the light emission asymmetry or on the percent variation of light emission on passing from pure nitrogen to pure oxygen.     

Identification tree based on fragmentation rules for structure elucidation of organophosphorus esters by electrospray mass spectrometry

Organophosphorus compounds have played important roles as pesticides, chemical warfare agents and extractors of radioactive material. Structural elucidation of phosphonates poses a particular challenge because their initial forms can be hydrolyzed, thus, degradation products may predominate in samples acquired in the field. The analysis of non‐volatile organophosphorus compounds and their degradation products is possible using electrospray tandem mass spectrometry ESI‐MS/MS. Here, we present a generic strategy that allows the unambiguous identification of substituents for two families of organophosphorus compounds: the phosphonates and phosphates. General fragmentation rules were deduced based on the study of decomposition pathways of 55 organophosphorus esters, including examples found in the literature. Multistage MS (MSⁿ) experiments at high resolution in a hybrid mass spectrometer provide accurate mass measurements, whereas collision‐induced dissociation experiments in a triple quadrupole give access to small fragment ions. The creation of a specific nomenclature for each possible structure of organophosphorus compound, depending on the alkyl side chain linked to the oxygen, was achieved by applying these fragmentation rules. This led to the creation of an ‘identification tree’ based upon the unique consecutive decomposition pathways uncovered for each individual compound. Hence, seven structural motifs were created that orient an unequivocal identification using the ‘identification tree’. Despite the similar structures of the ensemble of phosphate and phosphonate esters, distinct identifications based upon characteristic neutral losses and diagnostic fragment ions were possible in all cases. Copyright © 2013 John Wiley & Sons, Ltd.     

3D Metal–Organic Frameworks Based on Co(II) and Bithiophendicarboxylate: Synthesis,Crystal Structures,Gas Adsorption,and Magnetic Properties

Three new 3D metal-organic porous frameworks based on Co(II) and 2,2′-bithiophen-5,5′-dicarboxylate (btdc²⁻) [Co₃(btdc)₃(bpy)₂]·4DMF, 1; [Co₃(btdc)₃(pz)(dmf)₂]·4DMF·1.5H₂O, 2; [Co₃(btdc)₃(dmf)₄]∙2DMF∙2H₂O, 3 (bpy = 2,2′-bipyridyl, pz = pyrazine, dmf = N,N-dimethylformamide) were synthesized and structurally characterized. All compounds share the same trinuclear carboxylate building units {Co₃(RCOO)₆}, connected either by btdc^2– ligands (1, 3) or by both btdc^2– and pz bridging ligands (2). The permanent porosity of 1 was confirmed by N₂, O₂, CO, CO₂, CH₄ adsorption measurements at various temperatures (77 K, 273 K, 298 K), resulted in BET surface area 667 m²⋅g⁻¹ and promising gas separation performance with selectivity factors up to 35.7 for CO₂/N₂, 45.4 for CO₂/O₂, 20.8 for CO₂/CO, and 4.8 for CO₂/CH₄. The molar magnetic susceptibilities χ_p(T) were measured for 1 and 2 in the temperature range 1.77–330 K at magnetic fields up to 10 kOe. The room-temperature values of the effective magnetic moments for compounds 1 and 2 are μ_eff (300 K) ≈ 4.93 μ_B. The obtained results confirm the mainly paramagnetic nature of both compounds with some antiferromagnetic interactions at low-temperatures T < 20 K in 2 between the Co(II) cations separated by short pz linkers. Similar conclusions were also derived from the field-depending magnetization data of 1 and 2.     

Characterization of Collagen/Lipid Nanoparticle–Curcumin Cryostructurates for Wound Healing Applications

Curcumin‐loaded collagen cryostructurates have been devised for wound healing applications. Curcumin displays strong antioxidant, antiseptic, and anti‐inflammatory properties, while collagen is acknowledged for promoting cell adhesion, migration and differentiation. However, when curcumin is loaded directly into collagen hydrogels, it forms large molecular aggregates and clogs the matrix pores. A double‐encapsulation strategy is therefore developed by loading curcumin into lipid nanoparticles (LNP), and embedding these particles inside collagen scaffolds. The resulting collagen/LNP cryostructurates have an optimal fibrous structure with ≈100 µm average pore size for sustaining cell migration. Results show that collagen is structurally unaltered and that nanoparticles are homogeneously distributed amidst collagen fibers. Hydrogels soaked in saline buffer release about 20 to 30% of their nanoparticles content within 24 h, while achieved 100% release after 25 days. When exposed to NIH 3T3 fibroblasts, these hydrogels provide a satisfactory scaffold for cell interaction as early as 4 h after seeding, with no cytotoxic counter effect. These positive features make the collagen/lipid cryostructurates a promising material for further use in wound healing.     

Development toward a double focusing isotopic separator for noble gas isotope enrichment

A double focusing sector field mass filter used in Nier–Johnson geometry has been built in order to perform Kr isotope enrichment for ⁸¹Kr and ⁸⁵Kr isotopes. The principle consists in implanting Kr⁺ ions accelerated at 7 keV in Al foils after separation using the magnetic sector. A specific ion source has been designed capable of generating high Kr⁺ ion beams (>0.5 μA) to transfer into the collecting Al foils in 3 to 5 h significant fractions of large Kr samples (10¹⁵ to 10¹⁶ atoms) initially introduced in the instrument. Implanted Kr isotopes can be further selectively released from the Al foil by surface ablation using an infrared laser beam. Implantation yields and enrichment factors are measured using a conventional mass spectrometer. Copyright © 2016 John Wiley & Sons, Ltd.     

Thermally Activated Delayed Fluorescence in a Y3N@C80 Endohedral Fullerene: Time‐Resolved Luminescence and EPR Studies

The endohedral fullerene Y₃N@C₈₀ exhibits luminescence with reasonable quantum yield and extraordinary long lifetime. By variable‐temperature steady‐state and time‐resolved luminescence spectroscopy, it is demonstrated that above 60 K the Y₃N@C₈₀ exhibits thermally activated delayed fluorescence with maximum emission at 120 K and a negligible prompt fluorescence. Below 60 K, a phosphorescence with a lifetime of 192±1 ms is observed. Spin distribution and dynamics in the triplet excited state is investigated with X‐ and W‐band EPR and ENDOR spectroscopies and DFT computations. Finally, electroluminescence of the Y₃N@C₈₀/PFO film is demonstrated opening the possibility for red‐emitting fullerene‐based organic light‐emitting diodes (OLEDs).