Core/shell particles containing 3-(methacryloxypropyl)-trimethoxysilane in the shell: synthesis, characterization, and application

In comparison to the corresponding single-component counterparts, core/shell particles are widely used due to their better physical and chemical properties. The surface properties of core/shell particles evidently play an important role in the process of application. It is easy to deduce that surface properties mostly depend on the properties of the component in the shell. Therefore, desirable materials of shell are very significant for the study of composite materials, especially in core/shell field. It is well known that polysiloxane has excellent properties, such as the water repellency, high flexibility, low surface energy, and biocompatibility. Its application, however, is limited due to poor cohesiveness and poor film-forming properties. Recently, much endeavor has been made to overcome such flaws. It is found that polyacrylate is commonly considered for its good cohesiveness and excellent film-forming property. The combination of polysiloxane and polyacrylate has been shown to be important in the composite material field, especially as core/shell particles. Unfortunately, their hydrophobicity is considerably different and thus, the core/shell particles consisting of polyacrylate (PA)/polysiloxane (PSi) are hard to prepare by general seeded emulsion polymerization, and are also scarcely available in the literature. In this study, the new core/shell PA/PSi particles with poly(butyl methacrylate) (PA) as the core and poly(3-(methacryloxypropyl)-trimethoxysilane) (PSi) as the shell were prepared by dispersion polymerization under the kinetically controlled conditions. The characterization of the particles by TEM, DSC, particle size analyzer as well as static contact angle confirmed the formation of core/shell structure. The application of core/shell (PA/PSi) particles also has been considered and discussed here.TEM micrographs of core/shell (PA/PSi) particles.     

茂基稀土胺化物与异氰酸正己酯的反应-{(MeC5H4)2Yb[OC(NPh2)N(n-hexyl)]}2的合成及表征

茂基稀土胺化物(MeCp)2YbNPh2(THF)与异氰酸正己酯(n-HexylNCO)按11摩尔比反应, 分离出产物{(MeC5H4)2Yb[OC(NPh2)N(n-hexyl)]}2. 产物经元素分析和核磁共振表征, 并测定了其晶体结构. 配合物属三斜晶系, R-3空间群, 晶胞参数为a=2.9533(11) nm, b=2.9533(11) nm, c=1.5873(6) nm, V=11.9896(80) nm3, Z=9, Dc=1.562 mg·m-3, μ=3.536 mm-1 (Mo Kα), F(000)=5670, R=0.034, Rw=0.064. 该化合物具有二个对称氧桥的双分子结构, 并存在着由氮原子向中心金属镱分子内配位而形成的三环骨架, 中心金属镱的配位数是九, 整个分子呈中心对称.     

电极条件对硫酸介质中电解还原提纯镱过程的影响

研究了以钌铱钛合金网和汞分别为阳、阴电极, 在无气氛保护条件下, 采用电解还原方法从铥、镱、镥硫酸盐溶液中分离提纯镱的过程. 讨论了在8 V恒电压时的电极间距、位置, 以及阴、阳极表面积对电解过程中的电流、还原率影响. 优化了电解还原过程, YbSO4产品的纯度稳定达到99.5%以上, 一次收率可达80%;提镱后母液中的铥和镥被富集4倍以上, 其中Lu含量高于50%, 十分有利于后续铥/镥分离.     

析相光度法测定铜（Ⅱ）的研究

本文研究了Ｃｕ（Ⅱ）－ＰＥＧ（聚乙二醇－２０００）－Ｚｉｎｃｏｎ（锌试剂）－（ＮＨ４）２ＳＯ４体系的析相光度法并应用于测定Ｃｕ（Ⅱ）。最宜酸度为ｐＨ５．５～８．５（ＫＨ２ＰＯ４－Ｋ２ＨＰＯ４）缓冲溶液）其络合物的最大吸收位于６１０ｎｍ，表观摩尔吸光系数为４．０×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，Ｃｕ（Ⅱ）浓度在０～１．５ｍｇ／Ｌ范围内服从比尔定律，铜与Ｚｉｎｃｏｎ形式组成为１：２的稳定的蓝色络     

压力流驱动电色谱分析方法及其若干色谱行为

压力流驱动电色谱分析方法是一种新型色谱技术。它组合了ＨＰＬＣ和电泳两种技术，为分离提供了更多可控制的因素。介绍了压力流驱动电色谱的装置和毛细管电色谱柱的装置方法，从理论上讨论了影响电色谱分离的因素并用实验数据加以证明。最后尝试性地将电色谱法用于测定香蕉样品中萨索啉（Ｓａｌｓｏｌｉｎｏｌ）等的含量。     

分析信号处理方法的比较研究

研究了高效液相色谱－火焰原子吸收光谱联用系统分析信号处理方法，比较了各种处理方法的优缺点，用积分与适应平滑法综合处理色谱峰分析信号，不仅能有效地消除噪声，而且能使分析信号得到加强，以测定镍为例，经积分与适应平滑法综合处理后，检出限改善了２．７倍。     

鲨鱼软骨质量的聚类分析法

用电感耦合等离子体原子发射光谱法（ＩＣＰ－ＡＥＳ）测定了１８个鲨鱼软骨真品中１３个元素含量，对测定结果进行分析和变量聚类分析，抽提５个特征指标，并以谱系数聚类建立了鉴别鲨鱼软骨真伪的数学模式，用３个假冒产品和一个鲨鱼软骨胶囊对其进行检验，结果表明，用无机元素所建立的数学模式不仅能鉴别鲨鱼软骨的真伪，还能区分鲨鱼软骨的部分及不同部位的混合物。     

可逆反应的热静力学研究法

化学反应的焓变△H和平衡常数K的测定是热静力学研究的重要任务。通常用量热法可以此较准确地测定△H,但要从量热数据直接得到K则是在六十年代初才开始有所探索。在达方面,Drago和Christensen的工作是值得借鉴的。本文建立了一种中性配位体与一价金属离子络合反应体系的热静力学研究法,并用这种方法研究了二苯并18-冠-6与Na~+的络合反应,同时得到了反应的△H和平衡常数K。实验值与文献值符合。     

Harnack Inequalities for Functional SDEs Driven by Subordinate Brownian Motions

Potential Analysis - Using coupling by change of measure and an approximation technique, Wang’s Harnack inequalities are established for a class of functional SDEs driven by subordinate...