关于P-Laplace方程解的梯度HOlder连续性的一个注记

对文献〔１—３〕中的结果：ｕｔ＝ｄｉｖ（｜ｕ｜ｐ－２ｕ）在ΩＴ＝Ω×（０，Ｔ）上弱解的空间梯度是Ｈｌｄｅｒ连续的做一个补充．在这个注记里，本文作者讨论条件Ｐ＞ｍａｘ｛１，２ＮＮ＋２｝是怎样由ｕ的性质所确定的．属于ＬＮｌｏｃ（ΩＴ）空间解的梯度是Ｈｌｄｅｒ连续的条件仅仅是Ｐ＞１．     

钢轨气压焊试验研究

对碳钢钢轨气压焊进行了试验研究。探讨了焊接工艺过程对气压焊焊接接头显微组织及强度的影响。     

冷库温度自动记录仪

本文介绍广西计算中心和广西区防疫站合作研制的冷库温度自动记录录仪，文中着重介绍其软硬件设计和主要功能。该记录仪性能／价格比优于国外同类产品，可以用来代替进口产品。     

Modelling of multi-bodies in close proximity under water waves——Fluid resonance in narrow gaps

Viscous fluid model and potential flow model with and without artificial damping force(f=-μV,μ the damping coefficient and V the local averaging flow velocity) are employed in this work to investigate the phenomenon of fluid resonance in narrow gaps between multi-bodies in close proximity under water waves.The numerical results are compared with experimental data available in the literature.The comparison demonstrates that both the viscous fluid model and the potential flow model are able to predict the res...     

A novel simulation method to evaluate the collection performance of a monolithic active pixel sensor

A novel simulation method is presented in this paper to evaluate the collection performance of monolithic active pixel sensor (MAPS) devices for minimum ionizing particle tracking. A simplified 3D matrix pixel structure is built using the computer aided design software Sentaurus. The virtual device is then divided into hundreds of parts and an independent customized X photon model is involved in each part to simulate the conditions under ⁵⁵Fe radiation. After data processing and analysis, charge collection efficiency, collection time and diffusion conditions can be estimated in detail. In order to verify the reliability of the method, comparisons are made between the simulations and experiments. Although there are some defects, it can be concluded that the proposed idea is a feasible method for the evaluation of the MAPS collection performance.     

水热法合成ZnS∶Au,Cu超细X射线发光粉

报道了水热法合成的高强度ZnS∶Au,Cu超细X射线发光粉及其光致发光(PL)和X射线激发发光(XEL)的光谱特性。200℃水热处理12h直接合成样品的纳米晶粒约15nm,尺寸分布窄,分散性好,具有纯立方相的类球形结构。氩气保护下1000℃焙烧1h后的样品存在一定的团聚,但团聚后尺寸为1～2μm,为超细X射线发光粉,此时样品为纯六角相的类球形为主的结构。所有样品的PL和XEL光谱均为宽带谱,水热法直接合成样品的XEL强度最强时,样品的Cu/Zn,Au/Cu比值分别为3×10-5和2。在此比值条件下,1000℃焙烧1h样品的XEL发光最强,此时其2个峰值分别位于445和513nm,且与未焙烧前相比强度增强了10倍左右。另外通过比较PL光谱与XEL光谱特性,讨论了PL和XEL光谱的发光机理和其不同的激发机制。     

α，α‘—二氧代烯酮环二硫代缩酮类化合物的特征红外光谱（Ⅲ）

研究了5种α，α‘-二氧代烯酮环二硫代缩酮类化合物的碳基、碳碳双键、碳硫等一些特征红外光谱，尤其着重研究了共轭体系下的各种特征谱带随化学结构而变化的规律。     

高温X-射线衍射法考察分子筛的热稳定性——Ⅰ、硅磷酸铝分子筛(SAPO)

用高温X-射线衍射法考察了四种具有不同孔径SAPO型分子筛的热稳定性。结果表明,具有较大孔径的SAPO-5与SAPO-11在1000℃时骨架仍没有明显破坏,其热稳定性优于具有较小孔径的SAPO-34与SAPO-20;由Zn或Mg杂原子取代SAPO-34骨架上的Si原子后,其热稳定性明显下降;ZSM-5,ALPO_4-5以及SAPO-5三种具有孔径大小相近分子筛的热稳定性依次下降。此外,分子筛在低角区的XRD峰强度对吸附水汽十分敏感。     

谈谈信息时代的教学方式

在教师角色发生转变，学生学习方式发生变化的信息时代的教学方式要注重教学质量，把信息时代的先进教学手段与传统教学手段有机结合起来，以有效地促进教学。