SOME BLENDING INTERPOLATION METHODS IN CAGD

Some of the blending interpolation methods (which) stated by a convex combination technique are presented. This includes C1 ,C2 blending triangular interpolanls and C1 -blending quadrilateral inter polanls for surfaces. The mentioned methods can be generalized to the construction of C" blending interpolants.     

Effect of La_2O_3/γAl_2O_3 Catalyst on the Activation of CH_4 and CO_2 to C_02 Hydrocarbons under Non-equilibrium Plasma

The oxidative coupling of methane (OCM) to C2 hydrocarbons using carbon dioxide as oxidant is an attractive process from environmental point of view. Only a few research papers reported for it1-3. In general, the yield of C2 hydrocarbons was about 6%. This indicated that the method of catalytic activation was unfavorable to the reaction. It is necessary for us to find a new method in order to activate reaction and improve C2 hydrocarbon yield. Non-equilibrium plasma is a cold plasma in…     

糖和H_8-BINOL衍生的单齿亚磷酸酯配体的合成及其Rh催化α-脱氢氨基酸不对称氢化反应的研究

由单糖(如果糖、葡萄糖和甘露醇)和H8-2,2'-联萘二酚出发设计和合成了的六个手性单齿亚磷酸酯配体,研究了其铑配合物催化α-脱氢氨基酸甲酯的不对称氢化反应,在1%mol催化剂量和0.12MPaH2下,产物的对映选择性最高达到90.6%e.e.     

PEAK IDENTIFICATION FROM INTERACTION INDEX IN REVERSED-PHASE HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY

The interaction index c which was derived from the fundamental retention equationlogk' =a + cC_B in reversed--phase high--performancc liquid chromatography (RP-HPLC) quan-titatively describes the difference in the interaction between solute--strong. solvent andsolute--weak solvent; it has shown to be a constant for a specific solute even when columnsystems with different C18 packings are used. The theoretical basis for peak identificationby using interaction index has been proposed, which was based on the a,c values on stan-dard C18 column by utilizing linear a-a plots on column pairs and the linear relationship be-tween parameters a and c for the structural related compounds. Through the establishmentof parameters a,c data based on the standard C18 column for a certain type of compounds,the retention of thesc compounds on various C18 columns can be predicted. Typical exam-ples have been given to verify the correctness of this method.     

烯烃歧化催化剂Bu~4N[Mo(CO)~5Cl]-RAlCl~2活性衰减原因的探讨

考察了影响Bu_4N[Mo(CO)_5Cl]-RAlCl_2烯烃歧化催化剂活性的一些因素和反应过程中的动力学行为,并着重讨论催化剂活性衰减的原因。催化剂失活主要是由于形成的金属卡宾活性物种分解所引起。最后分析了烯烃加入顺序对催化剂活性的影响。     

Preparation and Characterization of Microencapsulated Hexadecane Used for Thermal Energy Storage

Polyurea microcapsules about 2.5μm in diameter containing phase change material for thermal energy storage application were synthesized and characterized by interfacial polycondensation method with toluene-2,4-diisocyanate and ethylenediamine as monomers in an emulsion system. Hexadecane was used as a phase change material and OP, which is nonionic surfactant, and used as an emulsifier. The chemical structure and thermal behavior of the microcapsules were investigated by FTIR and thermal analysis respectively. The results show encapsulated hexadecane has a good potential as a solar energy storage material.     

Synthesis of Two Novel Rhenium（I） Bipyridyl Photosensitive Dyes

Two novel rhenium(I) 2, 2′-bipyridyl complexes, [(4,4′-di-COOEt-bipy) Re(CO)3 (NCCH3)PF6] and [(4,4′-di-COOEt-bipy) Re (CO)3 (NCS)], a model complex [(4,4′-di-COOEt-bipy) Re (CO)3 (pyridine)PF6], were synthesized. Their ground state electronic spectra and emission spectra were measured in acetonitrile. The MLCT absorption maximum of the complex exhibited a considerable red shift as the ligand changed from pyridine to CNCH3, or SCN.     

MoO3/TiO2-Al2O3催化剂表面结构的LRS研究

负载型Mo和Co-Mo催化剂由于工业上的广泛应用,多年来一直是催化工作者的重要研究课题.工业上应用的Mo和Co-Mo催化剂多以活性Al_2O_3和SiO_2-Al_2O_3为载体,近年来也有用TiO_2,ZrO_2和活性碳作为催化剂载体的研究报导.有关催化剂活性组分与载体之间相互作用对催化剂表面相结构和催化性能的影响方面研究已引起人们的重视。我们多年来在金属-载体相互作用研究基础上,以石油加氢精制催化剂为应用背景,开     

Novel Water Soluble Fluorescent Trimethine Indocyanines Containing N-ρ-Carboxybenzyl Group

Indocyanine dyes as fluorescent labeling reagents have been used in bioanalysis1,2. Arylsulfonate indocyanine dyes 1d and 1e developed by Waggoner A. S. et al.3,4 have excellent fluorescent properties combined with good aqueous solubility, are a new generation of fluorescent label compounds for proteins, oligonucleotides and other compounds containing hydroxyl, mercaptol or primary amine groups5. However, photostability of these dyes has been a problem. Z. G. YAO et al.6 reported that p…     

Physico-chemical Characterization of Mo-Hβ Zeolite Catalysts

A series of Mo-impregnated Hβ samples, with MoO3 loading in Hβ zeolite in the mass fraction range of 0. 5%-6.0%, were studied by means of XRD and IR in order to characterize their structures. Mo/Hβ sampies‘ crystallinity almost linearly decreases with increasing the amount of MoO3 loaded, The IR spectra and XRD patterns suggest that the progressive destabilization of the Hβ zeolite structure is caused by increasing Mo loading in (MoO3 Hβ zeolite). During the calcination, Al2(MoO4)3 formed from the dealumination of Hβ zeolite, causes the substantially partial breakdown of the zeolite framework when the Mo loading in MoO3 Hβ is relatively high.