About the focal mechanism of Friuli earthquake occurred on May 6, 1976

Summary We are going to present the focal-mechanism solution of Fruili earthquake occurred on May 6, 1976, as it results from the analysis, on original seismograms, of the polarities of initial longitudinal waves obtained in 92 seismic stations. The polarities so obtained have been reported on the projection which represents the surface of the Earth and the solution has been drawn, directly, from the study of the resulting distribution, by establishing through Gr?fe's theory the two couples of forces considered as the sources of the seism at the focus. At last, a comparison has been carried out with the solution already obtained by other authors.

---

Riassunto Si presenta la soluzione del meccanismo focale del terremoto del Fruili del 6/5/1976 ottenuta dallo studio, sui sismogrammi originali, della polarità delle onde longitudinali iniziali, quale si è presentata in 92 stazioni sismiche vicine e lontane. Le polarità ottenute sono state riportate sulla superficie della Terra e la soluzione è stata ricavata direttamente dallo studio della distribuzione così ottenuta, definendo mediante la teoria di Gr?fe le due coppie di forze che hanno agito all'ipocentro. Un confronto è stato infine eseguito con le soluzioni in precedenza ottenute da altri autori.

---

Резюме Предлагается решение фокального механизма землетрясения, имевшего место в Фриули 6 мая 1976 г. Решение есть результат анализа исходных сейсмограмм, которые получены на 92 сейсмнческих, удаленнынных и близких. Полученные пояьрности представлены в проекции на поверхность Земли. Решение получено непосредственно из исследования результируюшего распределения, которое следует из теории Грефа для для двух пар сил, представляюших источники землетрясения в фокусе. В заключение проводится сравнение с решением, полученным ранее другими авторами.

     

基于LiCo0.8M0.2O2 (M=Ni,Zr)薄膜的全固态薄膜锂电池

用射频磁控溅射结合传统退火的方法制备LiCo0.8M0.2O2 (M=Ni,Zr)阴极薄膜．X射线衍射、拉曼光谱、扫描电子显微镜等手段表征了不同掺杂的LiCo0.8M0.2O2薄膜．结果显示,700℃退火的LiCo0.8M0．2O2薄膜具有类似α-NaFeO2的层状结构．通过对不同掺杂锂钴氧阴极的全固态薄膜锂电池Li／LiPON／LiCo0.8M0.2O2的电化学性能研究表明,电化学活性元素Ni的掺杂使全固态电池具有更大的放电容量(56μAh／cm2μm),而非电化学活性元素Zr的掺杂使全固态电池具有更好的循环稳定性．     

基于扩散势能和自由体积的自扩散系数模型

在考虑自由体积和局部临界扩散势能的基础上,提出一种新的计算自扩散系数模型,并给出新模型中各个因子物理含义．同时还提出一种计算局部临界扩散势能的新方法,并应用于新模型．另外将衍生van der Waals状态方程应用于求解自由体积,式中所需径向分布函数由Morsali-Goharshadi方程得到．在相同条件下,新模型比原自由体积模型更准确．     

关于雷诺方程SOR解法的若干探讨

逐次超松弛迭代（SOR）法是求解代数方程组应用较为广泛和有效的方法之一。此文通过对雷诺方程的求解，对SO方法求解精度判据δ和松弛因子ω选取等问题进行若干深入探讨，并通过大量的数值试验对其进行了分析研究。     

非肯定型工程问题的 Petri 网方法

一项工程一般都包含着多道工序.如果知道了各工序的工期以及工序之间的衔接关系,就可以画出工程的流程图.从工序流程图可以求出完成这项工程的最短时间和每个工序的最晚必须开工时间,并确定主工序线.这样便于统筹安排,提高施工效率.这就是统筹方法.我们提出解决这类工程问题的另一种方法:Petri 网方法.在[2]中我们定义了一类含时间因素的 Petri 网,并用这种网及其可达标识图对肯定型工程问题进行了分析和讨论.本文作为[2]的续篇,我们用 Petri 网方法讨论和分析非肯定型工程问题.     

退火温度对低温生长MgxZn1－xO薄膜光学性质的影响

用射频磁控溅射法在80℃衬底温度下制备出Mg_xZn_1-xO(x=0.16)薄膜，用X射线衍射(XRD)、光致发光(PL)和透射谱研究了退火温度对Mg_xZn_1-xO薄膜结构和光学性质的影响.测量结果显示，Mg_xZn_1-xO薄膜为单相六角纤锌矿结构，并且具有沿c轴的择优取向；随着退火温度的升高，(002)XRD峰强度、平均晶粒尺寸和紫外PL峰强度增大，(002)XRD峰半高宽(F 关键词： xZn_1-xO薄膜')" href="#">Mg_xZn_1-xO薄膜 射频磁控溅射 退火     

显微镜工作台闭环控制系统的设计与实现

高精度工作台控制系统是现代自动显微系统的重要组成部分,其精度直接影响显微镜对样品的检测质量。介绍了一种基于AT89C52单片机的显微镜工作台闭环控制系统的设计方案。工作台移动时作为检测元件的光栅输出脉冲信号。单片机控制电路实现脉冲的计数并计算误差值,控制步进电机进行反馈补偿。步进电机通过细分驱动模块可以以四种不同的步距驱动工作台移动,以实现显微镜对工作台移动速度的不同需要。8位数码管实时显示工作台移动的实际位置。实验结果表明,该系统的重复定位精度可达到0.020mm,可满足显微镜对控制工作台的要求。     

最有效的相容剂是两嵌段还是多嵌段聚合物？

采用Monte Carlo模拟方法研究了多嵌段聚合物在A／B／嵌段聚合物三组份体系作为相容剂使用的有效性．占总体积19％的A组份在体系中为分散相．模拟结果显示了两嵌段和多嵌段聚合物在界面上的聚集行为,以及如何影响这个不相容体系的相形为．两嵌段聚合物趋于直立在相界面上,而多嵌段聚合物更容易横跨在相界面上并占据较大的界面积．从而导致多嵌段聚合物更有效的阻止体系相分离的发生．     

Upconversion luminescence of Tm^3＋/Yb^3＋ codoped oxyfluoride glasses

Novel oxyfluoride glasses are developed with the composition of 30SiO2-15Al2O3-28PbF2-22CdF2-0.1TmF3 - xYbF3 - （4.9 - x） AlF3（x=0, 0.5, 1.0, 1.5, 2.0） in tool fraction, Furthermore, the upconversion luminescence characteristics under a 970nm excitation are investigated. Intense blue, red and near infrared luminescences peaked at 453nm, 476nm, 647nm and 789nm, which correspond to the transitions of Tm^3＋： ^1D2 →^3F4, ^1G4 →^3H6, ^1G4 →^3F4, and ^3H4 →^3H6, respectively, are observed. Due to the sensitization of Yb^3＋ ions, all the upconversion luminescence intensities are enhanced considerably with Yb^3＋ concentration increasing. The upconversion mechanisms are discussed based on the energy matching rule and quadratic dependence on excitation power. The results indicate that the dominant mechanism is the excited state absorption for those upconversion emissions.     

Optimal conclusive teleportation of a d-dimensional two-particle unknown quantum state

A conclusive teleportation protocol of a d-dimensional two-particle unknown quantum state using three d- dimensional particles in an arbitrary pure state is proposed. A sender teleports the unknown state conclusively to a receiver by using the positive operator valued measure（POVM） and introducing an ancillary qudit to perform the generalized Bell basis measurement, We calculate the optimal teleportation fidelity. We also discuss and analyse the reason why the information on the teleported state is lost in the course of the protocol,