负载型无铬超细铁基变换催化剂的制备和催化性能

 以镁铝尖晶石为载体，以过渡金属氧化物为助剂，用吸附γ－Fe2O3胶体法制备了负载型无铬铁基变换催化剂．TEM，XRD，BET和活性测试结果表明，采用胶体负载法制备的变换催化剂，其活性组分Fe3O4以分立的超细微颗粒分布在镁铝尖晶石载体表面上，颗粒之间存在一定的间隔．过渡金属氧化物NiO或V2O5能够进入Fe3O4晶格形成固溶体，起到代替氧化铬的作用，提高催化活性．负载型催化剂FeNi／MgAl2O4（m（NiO）／m（Fe2O3）＝3％）在汽／气比为1和空速为2000h－1的反应条件下，CO转化率在400和350℃时分别为95％和80％；在高空速和低汽／气比条件下也具有很好的催化性能．稳定性实验结果表明，该催化剂 具有良好的热稳定性和一定的抗硫能力．与非负载型催化剂相比，负载型催化剂具有更为优越的催化性能．     

无机胺合成ZSM-5沸石的结构表征和催化作用

分别以氨水和正丙胺为模板剂 ,在 177℃温度下静止晶化 5 0小时 ,合成出ZSM - 5沸石分子筛 .经XRD和IR测试 ,两者具有基本相同的结构 ;TG -DSC分析证明 ,两者都具有优良的热稳定性 .由于有机胺易氧化分解 ,故使得后者的腔内包含物氧化放热峰前移约 4 0℃ .合成的ZSM - 5沸石经用不同离子交换后 ,用于催化己烷芳构化反应     

Photo-and Electro-luminescence of the New Ternary Europium(III) Complex

In recent years, the interest in developing luminescent lanthanide complexes has been greatly stimulated by their potential use in electroluminescent displays1. Europium complexes appear most attractive in view of the high photoluminescent efficiency and the high monochromatic red light that are widely exploited in full-color displays2. It has been approved that the second ligand plays an important role in europium complexes, the synergistic complexation of the second ligand can not only lead …     

KINETICS OF NON-ISOTHERMAL CRYSTALLIZATION OF POLY (ETHYLENE TEREPHTHALATE) MODIFIED BY POLY (ETHYLENE GLYCOL)

The non-isothermal crystallization kinetics of poly(ethylene terephthalate) (PET) modified by poly (ethlene glycol) (PEG) were determined by DSC. The dual linear regression method was used to evaluate the relationship between the reciprocal of t 1/2 ( the half life of crystallization) and the appropriate temperature variable. The parameters such as the activation energy (Ed) for transport, the equilibrium melting temperature (T_m~0),the nucleation parameter (ψ),themaximum crystallization temperature (T_(e, max)), and the kinetic crystallizability (G) for the copolyesters were obtained. The influence of the PEG content in PET chains on the parameters characterizing crystallization kinetics and crystallization thermodynamics was discussed.     

脲醛树脂合成反应过程的FTIR研究

利用傅里叶变换红外(FTIR)光谱研究了脲醛树脂合成中不同结构形成和变化情况. 对FTIR谱图解析和分析的结果表明, 在脲醛树脂预聚物合成过程中, 随着甲醛与尿素反应的进行, 红外谱图特征峰发生有规律的变化, 酰胺II带特征峰波数逐渐低移, 有更多羟甲基、醚键和—NHCH2—结构基元形成, 固化反应使上述结构基元相应减少. 着重分析了不同甲醛与尿素摩尔比(nF/nU)下尿素与甲醛反应产物结构的变化, 随nF/nU的增加, 酰胺II带特征峰波数逐渐低移, 碱性条件下醚键和—NHCH2—结构基元明显增加, 在较强酸性条件下Uron环、亚甲基桥和羟甲基显著增加, 而—NHCH2—结构基元含量下降.     

在离子液体中一步法合成吡唑[5,4-b]-γ-吡喃衍生物

芳醛、丙二腈与4,5-二氢-3-甲基-5-氧代-1-苯基吡唑在离子液体[bmim][BF₄]中反应, 合成了2-氨基-4-芳基-3-氰基-5-甲基-7-苯基吡唑[5,4-b]-γ-吡喃衍生物, 该法快速、高效, 是一种洁净的合成方法. 产物的结构通过红外光谱、核磁共振氢谱和元素分析进行表征.     

含柔性间隔基的热致液晶性共聚酯的结晶形态

采用偏光显微镜、扫描和透射电镜从不同层次的结构水平上研究了含柔性间隔基热致液晶性共聚酯的结晶形态。在偏光显微镜下观察到典型的负光性球晶形态,透射电镜揭示了球晶是由厚度为10nm并沿着径向生长的片晶结构所组成,分子链沿晶片厚度方向取向排列。并研究了分子链的刚性程度对热致聚芳酯结晶性质的影响。结果表明,分子链刚性越大其结晶性和球晶的完善性越高。     

HNCS与C_2H(X~2Π)反应微观动力学的理论研究

用量子化学密度泛函理论的UB3LYP/6-311 G鄢鄢方法和高级电子相关的UQCISD(T)/6-311 G鄢鄢方法研究了异硫氰酸(HNCS)与乙炔基自由基(C2H(X2Π))反应的微观机理.采用双水平直接动力学方法IVTST-M,获取反应的势能面信息,应用正则变分过渡态理论并考虑小曲率隧道效应,计算了在250～2500K温度范围内反应的速率常数.研究结果表明,HNCS与C2H(X2Π)反应为多通道、多步骤的复杂反应,共存在三个可能的反应通道,主反应通道为通过分子间H原子迁移,生成主要产物NCS C2H2.反应速率常数随温度升高而增大,表现为正温度效应.速率常数计算中变分效果很小.在低温区隧道效应对反应速率的贡献较大,反应为放热反应.     

Synthesis, Crystal Structure and Electrochemistry Properties of a (N,N'-Ethylene-bis(salicylaldiminato)) Nickel(Ⅱ) Complex, [Ni2(salen)2]·NCS-NH4

A new Ni(Ⅱ) complex [Ni2(salen)2]·(NCS)·NH4 (salen = N,N'-bis(salicylidenea-mino)ethanato) has been prepared and structurally characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. It crystallizes in the orthorhombic system, space group Pbca with a = 16.8725(13), b = 19.0046(15), c = 20.0583(16) (A), Z = 8, V = 6431.8(9) (A)3, C33H32N6Ni2O4S1, Mr= 726.13, Dc = 1.500 g/cm3, F(000) = 3008, μ = 1.284 mm-1, the final R = 0.0394 and wR = 0.0767 for 4449 observed reflections with Ⅰ＞2σ(Ⅰ). The complex involves a N,N'-ethylene-bis(salicylaldiminato) Schiff base, an isothiocyanato anion and an ammonium cation. The nickle(Ⅱ) ion adopts a distorted square coordination geometry with N2O2 set of Schiff base ligand. The complexes are linked into a dimmer via intermolecular hydrogen bonds and the [Ni(salen)] moieties are connected together to form a 2-D layer structure by intermolecular N-H…O hydrogen bonds and π-π stacking. Cyclic-voltammetry method was used to characterize electrochemically the complex.