乙基罗丹明B-磷钒钼杂多酸-PVA体系超高灵敏显色反应的研究及应用

研究了乙基罗丹明B 磷钒钼杂多酸 PVA体系超高灵敏显色反应的适宜条件、灵敏度和选择性 ,及在实际工作中的应用。缔合物的最大吸收波长为 5 86nm ,表观摩尔吸光系数为 1.4×10 5L·mol- 1·cm- 1。方法用于钢铁、化学试剂和铬铁矿等中痕量磷的直接测定 ,结果满意     

热致液晶乙基纤维素与尼龙－1010共混物的研究

在自制单螺杆小型挤出机上通过熔融共混的办法，制备了不同配比（５／９５—２５／７５）的ＥＣ／Ｎｙｌｏｎ—１０１０共混物．用ＷＡＸＤ、ＤＳＣ、毛细管流变仪、力学性能测试等方法对共混物进行了研究．发现共混后尼龙－１０１０的形态结构有明显改变，其强度、模量都有提高，在高剪切速率下，共混物粘度大大降低．配比为１５８５时，这些性能的改进尤为明显．     

聚酰亚胺光控取向膜的研究现状

用线性偏振紫外光照射聚酰亚胺膜可以诱导液晶取向。本文对四种聚酰亚胺光控取向膜进行了详细的概述，并简述了这种光控取向膜的机理及未来应用。     

Design and synthesis of 2-alkylbenzimidazole derivatives as novel non-peptide angiotensin Ⅱ AT1 receptor antagonists

A series of 2-alkylbenzimidazole derivatives 9a-n have been designed and synthesized as a novel class of non-peptide angiotensin Ⅱ AT1 receptor antagonists. The synthesized compounds were evaluated for their antagonism of angiotensin Ⅱ, induced contraction in the rabbit thoracic aortic ring and the results showed that compounds 9a, 9g and 9j exhibited potent antagonistic activity of AT1 receptor.     

煤的孔结构特征对水煤浆性质的影响

本文选用１７种不同变质程度的中国煤，详细研究了煤孔结构特征对煤浆性质的影响。发现煤孔体积通过影响煤在分散体系中的吸水性，从而影响煤之成浆性。但由于不同变质程度煤表面亲水性的显著差异，煤孔体积在影响煤成浆性的能力方面差别很大，这使得煤吸水性和浆体最高煤浓度与煤孔体积并不存在直接的相关性，而是取决于煤孔体积Ｖ和以煤－水接触角（θ）的余弦值表示的煤表面亲水性因子的乘积，即煤之有效孔体积：Ｖ×ｃｏｓ（θ／     

Mechanism studies of the conversion of 13C-labeled n-butane on zeolite H-ZSM-5 by using 13C magic angle spinning NMR spectroscopy and GC-MS analysis

By using 13C MAS NMR spectroscopy (MAS = magic angle spinning), the conversion of selectively 13C-labeled n-butane on zeolite H-ZSM-5 at 430-470 K has been demonstrated to proceed through two pathways: 1) scrambling of the selective 13C-label in the n-butane molecule, and 2) oligomerization-cracking and conjunct polymerization. The latter processes (2) produce isobutane and propane simultaneously with alkyl-substituted cyclopentenyl cations and condensed aromatic compounds. In situ 13C MAS NMR and complementary ex situ GC-MS data provided evidence for a monomolecular mechanism of the 13C-label scrambling, whereas both isobutane and propane are formed through intermolecular pathways. According to 13C MAS NMR kinetic measurements, both pathways proceed with nearly the same activation energies (E(a) = 75 kJ mol(-1) for the scrambling and 71 kJ mol(-1) for isobutane and propane formation). This can be rationalized by considering the intermolecular hydride transfer between a primarily initiated carbenium ion and n-butane as being the rate-determining stage of the n-butane conversion on zeolite H-ZSM-5.     

High performance organic field-effect transistors based on amphiphilic tris(phthalocyaninato) rare earth triple-decker complexes

LB films of three amphiphilic tris(phthalocyaninato) rare earth triple-decker complexes with crown-ethers as hydrophilic heads and long alkyl chains as hydrophobic tails have been prepared and found to display very well ordered layer structures, as proved by pi-A isotherms, UV-vis and polarized absorption spectra, X-ray diffraction experiments, and microscopic morphology characterization. These LB films have been fabricated into field-effect transistor (FET) devices, which show carrier mobilities as high as 0.24-0.60 cm2 V-1 s-1, among the highest mobilities achieved thus far for all LB film-based OFETs.     

An order-disorder transition in Sr2IrD5: Evidence for square pyramidal IrD5 units from powder neutron diffraction data

Neutron diffraction data have been collected on a powdered sample of Sr₂IrD₅ over a range of temperatures. The compound, which is cubic at room temperature, has been found to exhibit a gradual transformation to a tetragonal phase in the temperature range 200-140 K. As a result of the transition, deuterium atoms which randomly occupy sixfold positions in the cubic phase, become tetragonally ordered. A small fraction of the cubic phase remained untransformed at 4.2 K. Both the cubic and tetragonal structures are consistent with square pyramidal IrD₅ units with average Ir---D distances of 1.714 and 1.718 Å, respectively. Agreement factors, R₁, for the two structural analyses are 3.44 and 4.94%.     

Micro construction of poly(epsilon-caprolactone)/poly(L-lactic acid) blend film by solution casting under microwave irradiation

The micro construction of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) blend films fabricated by solution casting under microwave irradiation was investigated by selective enzymatic degradation and scanning electron microscopy (SEM). The results were totally different from the blends obtained by conventional methods. The blend was more homogeneous and the PCL continuous phase more compact as no spherulites and tiny zone separation were observed from the film surface and no PCL network was observed inside the film, and the degradation of a PCL plank by Pseudomonas lipase was significantly retarded. The distributed PLLA micro spheres were enlarged and amorphous. The thermal behavior of the blend by microwave heating revealed that PCL and PLLA underwent a melting process, which induced the variations of the PCL phase and PLLA spheres. The weight loss caused by degradation of the PCL/PLLA blend obtained by conventional methods (B50c) is greater than that of the blend obtained by microwave methods (B50m), which reflects the change in morphology from a loose PCL network (B50c) to a dense PCL plank (B50m).     

Phase Selectively Soluble Dendritic Derivative of 4-(Dimethylamino)- pyridine: An Easily Recyclable Catalyst for Baylis-Hillman Reactions

Among the reactions in which C-C bonds are formed, the Baylis-Hillman coupling of aldehydes with α, β-unsaturated carbonylic compounds is currently attracting much interest due to the atom economy, the mild conditions and the generation of functional groups1,2. Furthermore, compared to the Heck, Suzuki and other palladium catalyzed C-C bond forming reaction3, the Baylis-Hillman reaction can be promoted by using organic bases in the complete absence of any metal4. However, almost all the …