Comparison of gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry for the determination of fatty and resin acids in paper mill process waters

A comparative study of the performance of liquid chromatography (LC)-atmospheric pressure chemical ionisation (APCI)-mass spectrometry (MS) and gas chromatography (GC)-mass spectrometry techniques for the determination of resin and fatty acids from paper mill process waters was carried out. These compounds are responsible for the high toxicity of paper mill effluents and little research has been carried out regarding their analysis using mass spectrometric techniques. To prove the usability of GC and LC-MS, 16 treated and untreated water samples of recycle, kraft and pulp paper mills were analysed and good agreement was observed as regards to compounds detected and corresponding concentrations. This paper also reports the limits of detection, recoveries, reproducibility, linearity and precision using the two methods. GC-MS presented better selectivity and lower detection limits (below 0.2 microg/l), but derivatization of the extracts and the short life of derivatives (12-24 h) made the technique tedious and prone to high variations. Although LC-APCI-MS presented coelution of the non-aromatic resin acids, it also showed good sensitivity (limits of detection <3 microg/l) and permitted the detection of resin and fatty acids at microg/l level. In addition, since samples could be directly injected to the chromatographic system, LC-APCI-MS was proven as a powerful technique for quick and unequivocal quality control during papermaking.     

Computational study on mechanistic details of the aminoethanol rearrangement catalyzed by the vitamin B12-dependent ethanolamine ammonia lyase: His and Asp/Glu acting simultaneously as catalytic auxiliaries

The rearrangement of aminoethanol catalyzed by ethanolamine ammonia lyase is investigated by computational means employing DFT (B3LYP/6-31G) and ab initio molecular orbital theory (QCISD/cc-pVDZ). The study aims at providing a detailed account on various crucial aspects, in particular a distinction between a direct intramolecular migration of the partially protonated NH(2) group vs elimination of NH(4)(+). Three mechanistic scenarios were explored: (i) According to the calculations, irrespective of the nature of the protonating species, intramolecular migration of the NH(3) group is energetically less demanding than elimination of NH(4)(+). However, all computed activation enthalpies exceed the experimentally derived activation enthalpy (15 kcal/mol) associated with the rate-determining step, i.e., the hydrogen abstraction from the 5'-deoxyadenosine by the product radical. For example, when imidazole is used as a model system for His interacting with the NH(3) group of the substrate, the activation enthalpy for the migration process amounts to 27.4 kcal/mol. If acetic acid is employed to mimic Asp or Glu, the activation enthalpy is somewhat lower, being equal to 24.2 kcal/mol. (ii) For a partial deprotonation of the substrate 2 at the OH group, the rearrangement mechanism consists of the dissociation of an NH(2) radical from C(2) and its association at C(1) atom. For all investigated proton acceptors (i.e., OH(-), HCOO(-), CH(3)COO(-), CH(2)NH, imidazole), the activation enthalpy for the dissociation step also exceeds 15 kcal/mol. Typical data are 20.2 kcal/mol for Ac(-) and 23.8 kcal/mol for imidazole. (iii) However, in a synergistic action of partial protonation of the NH(2) group and partial deprotonation of the OH group by the two conceivable catalytic auxiliaries Asp/Glu and His, the activation enthalpy computed is compatible with the experimental data. For imidazole and acetate as model systems, the activation enthalpy is equal to 13.7 kcal/mol. This synergistic action of the two catalytic groups is expected to take place in a physiologically realistic pH range of 6-9.5, and the present computational findings may help to further characterize the yet unknown structural details of the ethanolamine ammonia lyase's active site.     

Application of samarium diiodide (SmI2)-induced reduction of gamma-acetoxy-alpha,beta-enoates with alpha-specific kinetic electrophilic trapping for the synthesis of amino acid derivatives

Gamma-acetoxy-alpha,beta-enoates were easily reduced by samarium diiodide (SmI2) in THF to generate samarium dienolates which were kinetically trapped with ease at their alpha-positions by electrophiles (proton, aldehydes or ketones) to yield (E)-alkene dipeptide isosteres or gamma-amino acid derivatives in high chemical yields.     

Photoinduced face-inversion of conjugated tetraene ligands on a Pd-Pd-Pd moiety

The linear sandwich tripalladium complexes [Pd3{Ar(CH=CH)4Ar}2[BArf]2 (Ar = Ph, p-t-Bu-C6H4, p-styryl-C6H4) undergo photoinduced isomerization involving face-inversion of the tetraene ligands. Irradiation of these complexes with visible light (>510 nm) resulted in rac (staggered sandwich) to meso (eclipsed sandwich) isomerization. The structures of rac and meso isomers are determined by X-ray crystallographic analyses.     

A new,simple, and selective palladium-catalyzed cleavage of triethylsilyl ethers

[reaction: see text] A simple procedure for the cleavage of triethylsilyl (TES) ethers in the presence of 10 wt % Pd/C in methanol or 95% ethanol is reported. This method allows selective removal of alkyl TES ethers in the presence of aromatic TES ethers or tert-butyldimethylsilyl (TBS) protecting groups.     

Synthesis,structure, and magnetic properties of dinuclear cobalt(II) complexes with a new phenol-based dinucleating ligand with four hydroxyethyl chelating arms

A new end-off type acyclic ligand with four hydroxyethyl arms, 2,6-bis[bis(2-hydroxyethyl)aminomethyl]-4-methylphenol [H(bhmp)], formed dinuclear cobalt(II) complexes [Co(2)(bhmp)(OAc)(2)]BPh(4) (1) and [Co(2)(bhmp)(OBz)(2)]BPh(4) (2). The complex 1.2.5CH(3)CN (C(50)H(62.5)BCo(2)N(4.5)O(9)) crystallizes in the monoclinic space group C2/c with dimensions a = 25.424(5) A, b = 13.376(2) A, c = 29.913(6) A, beta = 105.930(3) degrees, and V = 9781(3) A(3) and with Z = 8. X-ray diffraction analysis revealed a mu-phenoxo-bis(mu-acetato)dicobalt(II) core structure containing two octahedral cobalt(II) ions. Electronic spectra were investigated for 1 and 2 in the range 400-1800 nm, and the data were typical for the octahedral high-spin cobalt(II) complexes. Magnetic susceptibility was measured for 1 and 2 over the temperature range 4.5-300 K, and the data were analyzed well using our theoretical method. The best fitting parameters were kappa = 0.77, lambda = -116 cm(-1), Delta = 572 cm(-1), and J = -0.44 cm(-1) for complex 1 and kappa = 0.96, lambda = -93 cm(-1), Delta = 616 cm(-1), and J = -0.33 cm(-1) for complex 2.     

Postcolumn fluorescence as an alternative to evaporative light scattering detection for ceramide analysis with gradient elution in non-aqueous reversed-phase liquid chromatography

Ceramide analysis was developed with gradient elution in non-aqueous reversed-phase liquid chromatography with evaporative light scattering detection (ELSD) or postcolumn fluorescence detection. Fluorescence detection (excitation, 360 nm; emission, 425 nm) after postcolumn formation of mixed assemblies between eluted ceramides and 1,6-diphenyl-1,3,5-hexatriene was developed. In comparison with ELSD, fluorescence detection allows a better detection of the minor species ceramide from ceramide type III (commercial mixture of non-hydroxy fatty acid-sphingosine) and appears to be more sensitive for quantitation of ceramides at low concentrations. The fluorescence response is linear over a wide range of injected amount of ceramide III (expressed as stearoyl-phytosphingosine): 10 ng to 1000 ng. The response of ELSD is non linear but can be linearized in double logarithmic coordinates for calculations over a narrow range, e.g. between 10 to 350 ng ceramide III injected. The lower quantitation limits of these two detectors are similar: 5 ng ceramide III was injected.     

alpha-thiocyanation of carbonyl and beta-dicarbonyl compounds using (dichloroiodo)benzene-lead(II) thiocyanate

The combination reagent (dichloroiodo)benzene and lead(II) thiocyanate in dichloromethane effects oxidation of various enol silyl ethers, ketene silyl acetals, and beta-dicarbonyl compounds, thereby providing an efficient and convenient method for alpha-thiocyanation of carbonyl and beta-dicarbonyl compounds.     

Absolute configuration and conformational stability of (+)-2,5-dimethylthiolane and (-)-2,5-dimethylsulfolane

Enantiopure (+)-2,5-dimethylthiolane and (-)-2,5-dimethylsulfolane were prepared using literature procedures and investigated using vibrational circular dichroism (VCD). Experimental absorption and VCD spectra of (+)-2,5-dimethylthiolane and (-)-2,5-dimethylsulfolane in CCl(4) solution in the 2000-900 cm(-)(1) region were compared with the ab initio predictions of absorption and VCD spectra obtained with density functional theory using the B3LYP/6-311G(2d, 2p) basis set for different conformers of (2R,5R)-2,5-dimethylthiolane and (2R,5R)-2,5-dimethylsulfolane. This comparison indicates that (+)-2,5-dimethylthiolane is of the (2R,5R)-configuration and has two predominant conformations in CCl(4) solution. In addition, (-)-2,5-dimethylsulfolane is of (2R,5R)-configuration and has only one predominant conformation. The stereochemical assignment is in agreement with literature.     

Weak intramolecular proton-hydride and proton-fluoride interactions: experimental (NMR, X-ray) and DFT studies of the bis(NBH(3)) and bis(NBF(3)) adducts of 1,3-dimethyl-1,3-diazolidine

Bis(NBH(3)), bis(NBF(3)), and NBF(3)/NBH(3) adducts 1-3 were prepared from 1,3-dimethyl-1,3-diazolidine and characterized by the (1)H, (13)C, (11)B, (19)F, 2D (1)H(-13)C HETCOR and NOESY NMR spectra. The structures and conformations of the adducts were established by the variable-temperature (1)H NMR spectra, the X-ray diffraction method (adduct 2A), and density functional calculations at different theoretical levels. The experimental and theoretical data have revealed that bis adducts 1-3 prefer trans orientations of the borane groups (1A, 2A, 3A) in solution, the solid state, and the gas phase. The studies have shown that the energetic preference of trans adducts with respect to cis compounds, decreasing as 2A (2.9 kcal/mol) > 3A (2.7 kcal/mol) > 1A (1.4 kcal/mol), is dictated by spatially repulsive interactions between the CH(3), BH(3), and BF(3) groups. The results of DFT calculations agree well with an experimental trans/cis isomeric ratio of 9:1 determined in solutions of adduct 1. The calculated geometry and energy, as well as the topological analysis of electronic densities, show that trans adducts 1-3 should exist in gas phase as twist conformations T-2 stabilized by the intramolecular C-H(delta+)...(-delta)H-B or C-H(delta+)...(-delta)F-B interactions. These interactions are characterized as closed-shell. The energy of one proton-hydride and proton-fluoride intramolecular contact, estimated as 1.9 (1A-T-2) and 0.7 (2A-T-2) kcal/mol, respectively, classifies the "elongated" intramolecular interactions CH(delta+)...(-delta)HB and CH(delta+)...(-delta)FB as weak ones. It has been established that, on going from gas phase to a condensed phase (solution and solid), the twist-conformations T-2 transform to conformations T-1, probably by intermolecular dipole-dipole interactions. The data presented in this work show that despite a weakness of the "elongated" proton-hydride and proton-fluoride interactions, they can play a significant role in the stabilization of conformational molecular states, especially when cooperativity is in action.