一种检测低浓度化学需氧量的双波长光谱方法

提出了一种基于双波长光谱法快速测定低污染水样的化学需氧量(COD)的方法.结果表明:对低COD样品采用440和560 nm双波长的测定方法可有效地提高可靠性和检测灵敏性.该法的灵敏度(即定量检测下限)为8.6 mg·L-1;在低COD范围标样(≤100mg·L-1)的准确性对比测定相对标准误差在2%～15%的范围内.另外,该方法不需要用标准样品进行校正,可以通过光谱法检测消解液中重铬酸根的消耗直接计算出样品的COD值,使实验步骤得到了进一步的简化.     

曲率半径误差对平场全息凹面光栅分辨率的影响及其补偿方法

在平场凹面全息光栅的没计制作中,不可避免的存在曲率半径误差,严重影响光栅光谱仪的分辨率.为了从理论上分析并指导光谱仪器的设计和装调,运用几何光线追迹方法计算并分析了不同曲率半径误差下光谱像宽度的变化规律,发现在一个较大的误差范围内子午焦线的位置随着曲率半径的变化前后平移,同时其弯曲程度几乎没有改变.数值计算发现通过调整像面位置或人臂长度均能够补偿曲率半径的误差.数值模拟结果显示,修正使用结构后的光栅能够达到与设计结果相近的成像质量.     

两端叠层结构的中长波量子阱红外探测器

采用分子束外延技术生长了两个叠层结构的双色量子阱红外探测器结构,并经过光刻和湿法刻蚀制作成两端结构的量子阱红外探测器单元器件. 通过改变量子阱势垒高度,势阱宽度,掺杂浓度,重复周期数等器件参数,可以使总电压在两个叠层之间产生适当的分布,从而使器件表现出不同的电压响应特点. 光电流谱测量显示,器件1随着外加偏置电压可实现对于中波大气红外窗口(3—5 μm)和长波大气红外窗口(8—12 μm)红外响应的切换,器件2在不同的偏置电压下可以对这两个波段同时做出响应. 本文探讨了两端叠层结构量子阱红外探测器的工作原 关键词： 电压调制 同时响应 量子阱红外探测器 双波段     

KTP(001)晶体分光性能研究

根据同步辐射光源对软X射线分光晶体的性能要求,分析了软X射线能区常用分光晶体的性能优劣,指出对于晶格常数值大的分光晶体,KTP(KTiOPO₄)(011)是该能区比较理想的分光晶体. 同时提出了一种利用同步辐射光源测量晶体衍射效率的实验方法,指出光源的发散度与晶体的衍射效率密切相关. 测量了KTP(011)晶体的晶格常数,给出了KTP(011)晶体的实测衍射效率. 关键词： 同步辐射 KTP(011)晶体 衍射效率 光源发散度     

透射光栅的实验标定和衍射效率的理论模拟

透射光栅广泛应用于软X射线能谱测量.为了获得用于惯性约束聚变研究的透射光栅的各级衍射效率及其他参数,在北京同步辐射源上200—1600 eV能量范围内对其进行了标定,获得了透射光栅衍射效率的实验结果.扩展了透射光栅衍射效率的计算方法,提出了7边准梯形截面衍射效率计算模型.分析拟合了实验数据,理论结果与实验结果很好符合.得到了7边准梯形的透射光栅栅线截面结构. 关键词： 透射光栅 衍射效率 实验标定 光栅模型     

RGDS-fuctionalized alginates improve the survival rate of encapsulated embryonic stem cells during cryopreservation

Cryopreservation of stem cells, especially embryonic stem cells, is problematic because of low post-thaw cell survival rates and spontaneous differentiation following recovery. In this investigation, mouse embryonic stem cells (mESCs) were encapsulated in arginine-glycine-aspartic acid-serine (RGDS)-coupled calcium alginates (1.2 percent, w/v), allowed to attach to the substratum and then cryopreserved in 10 percent (v/v) dimethyl sulfoxide (DMSO) solution at a slow cooling rate of 1 C per min. RGDS coupling to alginate was confirmed by Transmission Fourier Transform Infra-Red spectroscopy (T-FTIR) and quantified by using ninhydrin-Ultraviolet/Visible light (ninhydrin-UV/VIS) assay. Flow cytometry data showed that mESCs cryopreserved in RGDS-alginate beads had a higher expression of stem cell markers compared with cells cryopreserved in suspension or cells cryopreserved in unmodified alginates. Cell viability after thawing was assessed using trypan blue exclusion assay and monitored using Alamar blue assay for 6 hours. It was shown that post-thaw cell survival rate was significantly higher for cells encapsulated in RGDS-modified alginate (93 ± 2 percent, mean and standard error) than those in suspension (52 ± 2 percent) or in unmodified alginates (62 ± 3 percent). These results showed that cells encapsulated and attached to a substratum have better survival rate and stem cell marker expression 24 hours after cryopreservation than those in suspension. Encapsulation in RGDS-alginate was optimized for peptide concentration, cryoprotective agent loading time and cooling rate. The best result was obtained when using 12.5 mg peptide per g alginate, 30 minutes loading time and 1 C per min cooling rate.     

Diffraction inhibition in two-dimensional photonic crystals

We show the existence of flat equal-frequency contour across the entire first Brillouin zone in two-dimensional photonic crystals. Under this condition, light diffraction can be inhibited. Moreover, the beam can be highly localized between two neighboring rows of the defect-free photonic crystal. Such a finding may have novel applications in light beam manipulations and on-chip integrated photonic devices.     

Analysis and improvement of Laguerre-Gaussian beam position estimation using quadrant detectors

Laguerre-Gaussian beams have become increasingly important in areas like optical manipulation and quantum communications. A good understanding of the accuracy and sensitivity of their displacement measurements are required for these applications. In this Letter, we present a method to analyze and compare the performance of these measurements, and an estimation technique is proposed to improve their measurement accuracies. The effectiveness of our methods is verified by simulation studies.     

High-power 880-nm diode-directly-pumped passively mode-locked Nd:YVO₄ laser at 1342 nm with a semiconductor saturable absorber mirror

A high-power 880-nm diode-directly-pumped passively mode-locked 1342 nm Nd:YVO? laser was demonstrated with a semiconductor saturable absorber mirror (SESAM). The laser mode radii in the laser crystal and on the SESAM were optimized carefully using the ABCD matrix formalism. An average output power of 2.3 W was obtained with a repetition rate of 76 MHz and a pulse width of 29.2 ps under an absorbed pump power of 12.1 W, corresponding to an optical-optical efficiency of 19.0% and a slope efficiency of 23.9%, respectively.     

Electrochemical characterization of LiCoO2 as rechargeable electrode in aqueous LiNO3 electrolyte

The development of lithium ion aqueous batteries is getting renewed interest due to their safety and low cost. We have demonstrated that the layer-structure LiCoO₂ phase, the most commonly used electrode material in organic systems, can be successful delithiated and lithiated again in a water-based electrolyte at currents up to 2.70 A/g. The capacity is about 100 mAh/g at 0.135 A/g and can be tuned by cycling the electrode in different potential ranges. In fact, increasing the high cut-off voltage leads to higher specific capacity (up to 135 mAh/g) but the Coulomb efficiency is reduced (from 99.9% to 98.5%). The very good electrode kinetic is probably due to the high conductivity of the electrolyte solution (0.17 Scm^− 1 at 25 °C) but this behavior is affected by the electrode load.