Toward the most versatile fluorophore: Direct functionalization of BODIPY dyes via regioselective C—H bond activation

BODIPY dyes are privileged fluorophores that are now widely used in highly diverse research fields. An overview of BODIPY dyes and a summarization of the different synthetic methodologies reported for direct C-H functionalization of the BODIPY framework have been provided.     

聚乙二醇在高真空条件下的单链弹性

在过去二十年间，高分子的单链弹性已经得到了广泛的研究.然而由于环境和高分子之间往往有着复杂的相互作用，实验中很难得到高分子在严格无扰状态下的单链弹性（即本征弹性）.为此，利用单分子力谱技术研究了高真空条件下聚乙二醇（PEG）的单链弹性.结果表明，由于高真空条件下溶剂分子的干扰被消除，PEG在这一准无扰状态下呈现其本征弹性.在非极性有机溶剂中，由于溶剂分子和PEG之间只有微弱的范德华力作用，PEG表现出和高真空中基本一致的弹性.然而，在不同环境中，力曲线的低力区（F<100 pN）存在着细微的差异.这一现象可归因于不同条件下基底与PEG链之间的吸附力不同.采用的高真空力谱可用于研究其他高分子单链在准无扰状态下的本征弹性.     

在二甲基亚砜中电化学制备铈钴合金

利用循环伏安法和恒电位电解法研究了室温下在二甲基亚砜中铈钴合金膜的电化学制备.结果表明,二甲基亚砜中Ce(Ⅲ)在Pt电极上的还原反应为一步完全不可逆反应.控制沉积电位在-2.10V～2.30V,利用恒电位电解得到表面平滑,附着力好,铈含量为37wt%～45wt%的铈钴合金膜.     

BEHAVIOR OF SUPPORTED NANO-COPPER CATALYST IN CO OXIDATION

IntroductionNanomaterialisanewkindofmaterialwithparticlesizebetWeenIurnand100urn.Becauseofthesmallparticlesizeandthelargespecificsufficearea,nanomaterialpossessesmanyparticularproperties,suchashighersufficeenergyandhighersurfaceactivity.t.[l]Thehigheracti…     

Chelate synthesis of 2,2′-bipyridin-4-one

A method for the synthesis of 2,2′-bipyridin-4-one from 4-amino-4-(2-pyridyl)-but-3-en-2-onevia its diphenylboron, chelates was proposed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2071–2073, November, 1997.     

Promoting effect of sol-gel method and pre-treatment on the activity of SnO2/Al2O3 catalyst for NO reduction by propene

SnO₂/Al₂O₃ catalyst prepared by sol-gel method showed higher activity than those prepared by impregnation method, and their activity was significantly improved by pre-treatment in the reaction gas. The increased activity is closely related to the agglomeration of SnO₂ species and the re-exposure of Al₂O₃, which was previously covered by dispersed SnO₂ species. This revised version was published online in June 2006 with corrections to the Cover Date.     

红外光谱法研究LB膜中的分子取向

The structure information of orientation and packing of molecular chains can be obtained from infrared transmission and reflection-absorbance (RA) spectra. In the present paper, on the basis of Umemura et al., their FORTRAN program of minicomputer was developed and can be run on 486 personal computer. By comparison of infrared transmission and RA intensities, surface enhancement factors and molecular orientation angle were calculated using the above program, and the influence of complex refractive index, angle of incidence, and thickness of LB film were discussed. These results are consistent with that of Umemura et al.     

2, 2＇─(1, 4─亚乙二氧基)—二苯甲酸与钴(Ⅱ)生成的两种配合物的结构研究

硝酸钴与２，２＇－（１，４－亚乙二氧基）－二苯甲酸（Ｈ２Ｌ，图１）作用分别得到红色配合物ＣｏＬ＇和蓝色配合物ＣｏＬ″。经元素分析、红外光谱、紫外可见光谱、热分析等方法进行了表征、ＣｏＬ＇配合物的分子式为［ＣｏＬ．Ｈ２Ｏ］．３Ｈ２Ｏ，近八面体构型，羧酸根以双齿形式与Ｃｏ（Ⅱ）螯合；ＣｏＬ″配合物分子式为［ＣｏＬ″］。Ｈ２Ｏ，近四面体构型，羧酸根以单齿形与Ｃｏ（Ⅱ）配位。     

pH值对聚四氨基酞菁钴膜电化学和紫外光谱性质的影响

用循环伏安法在导电玻璃(ITO)和玻碳电极(GC)上制备了聚氨基酞菁钴(CoTAPc)修饰电极(CoTAPc/GC)。探讨了pH值对CoTAPc膜的光谱和电化学性质的影响，发现其氧化还原电位与pH值有线性关系，电催化活性也随酸度的增加而增加。CoTAPc膜的紫外吸收带变化与溶液pH值及在溶液中浸泡时间有关。     

稀土变质热锻模具铸钢高温磨损性能的研究

研究了稀土（RE）变质热锻模具铸钢的高温磨损性能，并与热锻模具钢H13钢和3Cr2W8V钢进行对比，探讨了稀土元素的作用和热锻模具铸钢的高温磨损机理。结果表明：随着RE加入量的增加，热锻模具铸钢的磨损率先减后增，RE加入量在质量分数为0．05％时热锻模具铸钢具有最佳的高温磨损性能。RE变质热锻模其铸钢的高温耐磨性明最高于H13钢和3Cr2W8V钢。高温磨损机理为氧化磨损和氧化物的疲劳剥落，磨屑为块状的Fe2O3和Fe3O4。