Growth and magnetic properties of single crystalline Ni nanowire arrays prepared by pulse DC electrodeposition

Highly textured Ni nanowire arrays were fabricated into anodic aluminum oxide(AAO) templates by pulse DC electrodeposition.The applied voltage and pH value of electrolytes were found strongly affecting the microstructure and magnetic properties of Ni nanowire arrays.Low applied potential and pH value both prefer to form polycrystalline fcc Ni nanowires.Increasing the applied potential or pH value favors the Ni [220] texture and even eventually forms the [220] oriented single crystal Ni wires,while exorbitan...     

Study of the primordial lithium abundance

Lithium isotopes have attracted an intense interest because the abundance of both 6Li and 6Li from big bang nucleosynthesis (BBN) is one of the puzzles in nuclear astrophysics. Many investigations of both astrophysical observation and nucleosynthesis calculation have been carried out to solve the puzzle, but it is not solved yet. Several nuclear reactions involving lithium have been indirectly measured at China Institute of Atomic Energy, Beijing. The Standard BBN (SBBN) network calculations are then perfo...     

Properties of the πh_(9/2)  νi_(13/2) band in odd-odd ~(188)Au

A new rotational band has been identified and assigned to 188Au for the first time using the 173Yb(19F,4nγ) reaction at the beam energies of 86 and 90 MeV. This band is proposed to be built on the πh9/2  νi13/2 configuration by comparing the band properties with known bands in neighboring nuclei. The prolate-to-oblate shape transition through triaxial shape has been proposed to occur around 188Au for the πh9/2  νi13/2 bands in odd-odd Au isotopes on the basis of total Routhian surface (TRS) calculations.     

Modelling of multi-bodies in close proximity under water waves——Fluid resonance in narrow gaps

Viscous fluid model and potential flow model with and without artificial damping force(f=-μV,μ the damping coefficient and V the local averaging flow velocity) are employed in this work to investigate the phenomenon of fluid resonance in narrow gaps between multi-bodies in close proximity under water waves.The numerical results are compared with experimental data available in the literature.The comparison demonstrates that both the viscous fluid model and the potential flow model are able to predict the res...     

Implementing two optimal economical quantum cloning with superconducting quantum interference devices in a cavity

We propose a unified scheme to implement the optimal 1→ 3economical phase-covariant quantum cloning and optimal 1→3 economical real state cloning with superconducting quantum interference devices (SQUIDs) in a cavity.During this process,no transfer of quantum information between the SQUIDs and cavity is required.The cavity field is only virtually excited.The scheme is insensitive to cavity decay.Therefore,the scheme can be experimentally realized in the range of current cavity QED techniques.     

Aspect-ratio dependent oscillatory thermocapillary convection in the floating half zone

The dependency of the critical Marangoni number on the geometrical aspect ratio of the floating half zone is essential to predict the onset of oscillatory thermocapillary convection.The experimental studies in the microgravity conditions on floating half zones of several centimeters in diameter have predicted that the critical Marangoni number increases with the increasing aspect ratio,and the terrestrial experimental studies have predicted the contradictory conclusion for floating half zones of several mil...     

Preparation of a silicon micro-strip nuclear radiation detector by a two-step annealing process

The annealing process for boron implantation is a crucial step during large size nuclear radiation detector fabrication. It can reduce the lattice defects and the projection straggling. A two-step annealing process for boron implantation was developed instead of a one-step annealing process, and the reverse body resistance of a silicon micro-strip detector was significantly increased, which means that the performance of the detector was improved.     

A study of the active thermal control for the high energy detector on the HXMT

A thermal control system (TCS) based on the resistance heating method is designed for the High Energy Detector (HED) on the Hard X-ray Modulation Telescope (HXMT). The ground-based experiments of the active thermal control for the HED with the TCS are performed in the ambient temperature range from -15 to 20 ℃ by utilizing the pulse width to monitor the interior temperature of a NaI(Tl) crystal. Experimental results show that the NaI(Tl) crystal's interior temperature is from 17.4 to 21.7 ℃ when the temperature of the PMT shell is controlled within (20±3) ℃ with the TCS in the interesting temperature range, and the energy resolution of the HED is maintained at 16.2% @ 122 keV, only a little worse than that of 16.0% obtained at 20 ℃. The average power consumption of the TCS for the HED with a low-emissivity shell is about 4.3 W, which is consistent with the simulation.     

A new analytical edge spread function fitting model for modulation transfer function measurement

We propose a new analytical edge spread function (ESF) fitting model to measure the modulation transfer function (MTF).The ESF data obtained from a slanted-edge image are fitted to our model through the non-linear least squares (NLLSQ) method.The differentiation of the ESF yields the line spread function (LSF),the Fourier transform of which gives the profile of two-dimensional MTF.Compared with the previous methods,the MTF estimate determined by our method conforms more closely to the reference.A practical application of our MTF measurement in degraded image restoration also validates the accuracy of our model.     

一种基于结构性改变的光子晶体光纤光栅理论研究

对一种新型基于结构性改变的光子晶体光纤光栅原理进行了研究.采用多极法分析了结构性改变对折射率的影响,得到有效折射率与包层气孔塌缩之间的关系,建立了结构性改变光子晶体光纤光栅模型.利用耦合模理论对所成光栅性能进行了分析,重点研究了包层空气孔层数、空气孔占空比、气孔塌缩程度对光栅谐振波长、带宽的影响.研究结果表明,光子晶体...